[Fri Oct 14 17:01:10 2011] Detection parameters:
  Position = (757.1, 521.3) = 17 51 34.72 -29 31 18.8
  Extent = 0.5" x 0.5", rotation angle = 42 degrees
  Source counts = 43.9 +/- 7.4
  Background counts = 11.1
  Rate = 0.0003 +/- 6e-05

[Fri Oct 14 17:01:18 2011] Off-axis axis estimate = 4.36'
[Fri Oct 14 17:05:06 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:05:06 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Fri Oct 14 17:05:06 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067
[Fri Oct 14 17:05:06 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.94"
[Fri Oct 14 17:05:10 2011] fullrun_ccd3_acisf09501_pi14-548_cl_pass0_src31.ximg exists
[Fri Oct 14 17:05:10 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09501_pi14-548_cl_pass0_src31.csv
[Fri Oct 14 17:05:10 2011] fullrun_ccd3_acisf09501_pi14-548_cl_pass0_src31_1.ximg exists
[Fri Oct 14 17:05:10 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09501_pi14-548_cl_pass0_src31.csv
[Fri Oct 14 17:05:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09501_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09501_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:05:13 2011] fullrun_ccd3_acisf09501_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Fri Oct 14 17:05:13 2011] fullrun_ccd3_acisf09501_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Oct 14 17:05:13 2011] Fit fullrun_ccd3_acisf09501_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Oct 14 17:06:12 2011] Spatial fit model total counts = 46.929900, observed total counts = 49.000000
[Fri Oct 14 17:06:12 2011] Offset between fit and detection position for source 59 = 0.360716 pixels
[Fri Oct 14 17:06:12 2011] 49.395000 total counts/ 14.692400 bgd. counts: snr = 9.053482
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.360716 pixels
  Position = (757.4, 521.6) = 17 51 34.73 -29 31 19.0
  Extent = 0.8 (0.5-0.9)", rotation angle = 0
  Source counts = 34.7 +/- 7.0
  Background counts = 14.7
  Rate = 0.0003 +/- 5e-05
[Fri Oct 14 17:06:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:06:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:06:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:06:12 2011] Source does appear to be extended
[Fri Oct 14 17:06:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:07:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:07:12 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Fri Oct 14 17:07:12 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.969
[Fri Oct 14 17:07:12 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 0.75"
[Fri Oct 14 17:07:23 2011] fullrun_ccd3_acisf09501_pi14-548_cl_pass1_src31.ximg exists
[Fri Oct 14 17:07:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09501_pi14-548_cl_pass1_src31.csv
[Fri Oct 14 17:07:23 2011] fullrun_ccd3_acisf09501_pi14-548_cl_pass1_src31_1.ximg exists
[Fri Oct 14 17:07:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09501_pi14-548_cl_pass1_src31.csv
[Fri Oct 14 17:07:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09501_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09501_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:07:25 2011] fullrun_ccd3_acisf09501_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Fri Oct 14 17:07:25 2011] fullrun_ccd3_acisf09501_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Oct 14 17:07:25 2011] Fit fullrun_ccd3_acisf09501_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Oct 14 17:08:29 2011] Spatial fit model total counts = 48.258600, observed total counts = 49.000000
[Fri Oct 14 17:08:29 2011] Offset between fit and detection position for source 59 = 0.277570 pixels
[Fri Oct 14 17:08:29 2011] 49.721000 total counts/ 12.000400 bgd. counts: snr = 10.888818
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.277570 pixels
  Position = (757.6, 521.7) = 17 51 34.72 -29 31 18.9
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 37.7 +/- 7.1
  Background counts = 12.0
  Rate = 0.0003 +/- 5e-05
[Fri Oct 14 17:08:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:08:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:08:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:08:29 2011] Source does appear to be extended
[Fri Oct 14 17:08:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 19:08:25 2011] Writing source region out to fullrun_ccd3_acisf09501_pi14-548_pass1_cl_src59_src.reg
[Fri Oct 14 19:08:25 2011] Extracting stamp from image fullrun_ccd3_acisf09501_pi14-548_cl_sm2.00.img.gz, (719, 484) - (796, 560)
[Fri Oct 14 19:08:25 2011] Writing fullrun_ccd3_acisf09501_pi14-548_pass1_cl_src59.gif
[Fri Oct 14 19:27:09 2011] Size of ../../acisf09501/products/events/fullrun_ccd3_acisf09501_pi14-548_pass1_cl_src59_src.evt.gz[events] = 47 counts
[Fri Oct 14 19:27:09 2011] Mean chipx,y = (686.47, 564.68)
[Fri Oct 14 19:27:09 2011] Mean tdetx,y = (4567.32, 3747.47)
[Fri Oct 14 19:27:09 2011] chipx,y range = (668.00-705.00, 543.00-581.00)
[Fri Oct 14 19:27:09 2011] Size of ../../acisf09501/products/events/fullrun_ccd3_acisf09501_pi14-548_pass1_cl_src59_bgd.evt.gz[events] = 125 counts
[Fri Oct 14 19:27:10 2011] Not generating rmf since there are only 37 counts
[Fri Oct 14 19:27:10 2011] arf not found, will run specextract
[Fri Oct 14 19:27:35 2011] ../../acisf09501/products/spectra/fullrun_ccd3_acisf09501_pi14-548_pass1_cl_src59.warf not found
[Fri Oct 14 19:27:35 2011] ../../acisf09501/products/spectra/fullrun_ccd3_acisf09501_pi14-548_pass1_cl_src59.wrmf not found
[Fri Oct 14 19:27:35 2011] Removal of ../../acisf09501/products/spectra/fullrun_ccd3_acisf09501_pi14-548_pass1_cl_src59.soff failed
[Fri Oct 14 20:12:36 2011] Spectrum 59 has only 38 counts, deleting rmf
[Fri Oct 14 20:12:36 2011] 190.123
[Fri Oct 14 20:15:12 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:15:12 2011] Error reading totcts from fullrun_ccd3_acisf09501_pi14-548_pass1_cl_src59_src.pi.gz
[Fri Oct 14 20:15:13 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:15:13 2011] Using photon index=1.80, rate=0.000288, arf fullrun_ccd3_acisf09501_pi14-548_pass1_cl_src59.arf
[Fri Oct 14 20:15:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 20:15:13 2011] Updating source flux to 4.1e-15
[Fri Oct 14 20:16:06 2011] Source 59 has fewer than 100.000000 counts, skipping spectral fitting