[Fri Oct 14 17:00:51 2011] Detection parameters:
  Position = (1120.7, 842.3) = 17 51 27.01 -29 37 6.7
  Extent = 0.5" x 0.5", rotation angle = 66 degrees
  Source counts = 42.8 +/- 7.0
  Background counts = 6.2
  Rate = 0.0003 +/- 5e-05

[Fri Oct 14 17:01:00 2011] Off-axis axis estimate = 1.75'
[Fri Oct 14 17:04:52 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:04:52 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Oct 14 17:04:52 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.274
[Fri Oct 14 17:04:52 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.41"
[Fri Oct 14 17:04:56 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass0_src27.ximg exists
[Fri Oct 14 17:04:56 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Oct 14 17:04:56 2011] Fit fullrun_ccd2_acisf09501_pi14-548_cl_pass0_src27 appears to have run properly
[Fri Oct 14 17:05:03 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Oct 14 17:05:03 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Oct 14 17:05:03 2011] Fit fullrun_ccd2_acisf09501_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Oct 14 17:05:59 2011] Spatial fit model total counts = 76.849200, observed total counts = 79.000000
[Fri Oct 14 17:05:59 2011] Offset between fit and detection position for source 20 = 0.754939 pixels
[Fri Oct 14 17:05:59 2011] 73.701700 total counts/ 32.163100 bgd. counts: snr = 7.324414
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.754939 pixels
  Position = (1121.3, 842.8) = 17 51 27.01 -29 37 6.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 41.5 +/- 8.6
  Background counts = 32.2
  Rate = 0.0003 +/- 7e-05
[Fri Oct 14 17:05:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:05:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:05:59 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:05:59 2011] Source does appear to be extended
[Fri Oct 14 17:05:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:07:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:07:05 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Oct 14 17:07:05 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.067
[Fri Oct 14 17:07:05 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.47"
[Fri Oct 14 17:07:07 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass1_src26.ximg exists
[Fri Oct 14 17:07:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09501_pi14-548_cl_pass1_src26.csv
[Fri Oct 14 17:07:07 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass1_src26_1.ximg exists
[Fri Oct 14 17:07:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09501_pi14-548_cl_pass1_src26.csv
[Fri Oct 14 17:07:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09501_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09501_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:07:09 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Fri Oct 14 17:07:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09501_pi14-548_cl_pass1_tfrozen_src26.csv
[Fri Oct 14 17:07:09 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Oct 14 17:07:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09501_pi14-548_cl_pass1_tfrozen_src26.csv
[Fri Oct 14 17:07:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09501_pi14-548_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09501_pi14-548_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:08:13 2011] Spatial fit model total counts = 71.536200, observed total counts = 79.000000
[Fri Oct 14 17:08:13 2011] Offset between fit and detection position for source 20 = 0.858024 pixels
[Fri Oct 14 17:08:13 2011] 73.960110 total counts/ 65.118900 bgd. counts: snr = 1.095616
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.858024 pixels
  Position = (1120.8, 843.4) = 17 51 27.03 -29 37 6.4
  Extent = 1.5" x 1.5", rotation angle = 94
  Source counts = 8.8 +/- 8.6
  Background counts = 65.1
  Rate = 7e-05 +/- 7e-05
  Deleting source due to low Poisson probability