[Fri Oct 14 17:00:58 2011] Detection parameters:
  Position = (365.5, 596.6) = 17 51 55.51 -29 39 7.4
  Extent = 1.6" x 0.9", rotation angle = 41 degrees
  Source counts = 15.6 +/- 5.6
  Background counts = 15.4
  Rate = 0.0001 +/- 4e-05

[Fri Oct 14 17:01:00 2011] Off-axis axis estimate = 7.18'
[Fri Oct 14 17:04:52 2011] Using EEF radius (= 2.29 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:04:52 2011] Initial guess for spatial extent in simple fitting = 2.29"
[Fri Oct 14 17:04:52 2011] source mask rpix=4.7, npix_max = 106, mask sum = 121, frac = 1.137
[Fri Oct 14 17:04:52 2011] Giving source the simple spatial ID 83 for pass 0, mean size = 2.29"
[Fri Oct 14 17:04:57 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass0_src83.ximg exists
[Fri Oct 14 17:04:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09501_pi14-548_cl_pass0_src83.csv
[Fri Oct 14 17:04:57 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass0_src83_1.ximg exists
[Fri Oct 14 17:04:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09501_pi14-548_cl_pass0_src83.csv
[Fri Oct 14 17:04:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09501_pi14-548_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09501_pi14-548_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:05:06 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass0_tfrozen_src83.ximg exists
[Fri Oct 14 17:05:06 2011] fullrun_ccd2_acisf09501_pi14-548_cl_pass0_tfrozen_src83_1.ximg exists
[Fri Oct 14 17:05:06 2011] Fit fullrun_ccd2_acisf09501_pi14-548_cl_pass0_tfrozen_src83 appears to have run properly
[Fri Oct 14 17:05:59 2011] Spatial fit model total counts = 94.300800, observed total counts = 94.000000
[Fri Oct 14 17:05:59 2011] Offset between fit and detection position for source 100 = 0.655353 pixels
[Fri Oct 14 17:05:59 2011] 94.922380 total counts/ 87.141900 bgd. counts: snr = 0.833476
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 0.655353 pixels
  Position = (365.2, 596.1) = 17 51 55.54 -29 39 7.9
  Extent = 0.6" x 0.6", rotation angle = 0
  Source counts = 7.8 +/- 9.7
  Background counts = 87.1
  Rate = 6e-05 +/- 7e-05
  Deleting source due to low Poisson probability