[Fri Oct 14 17:00:34 2011] Detection parameters:
  Position = (931.7, 465.8) = 17 50 55.37 -29 41 31.4
  Extent = 3.9" x 3.0", rotation angle = 145 degrees
  Source counts = 90.6 +/- 13.6
  Background counts = 95.4
  Rate = 0.0007 +/- 0.0001

[Fri Oct 14 17:00:35 2011] Off-axis axis estimate = 9.28'
[Fri Oct 14 17:04:36 2011] Using EEF radius (= 3.81 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:04:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 17:04:36 2011] Initial guess for spatial extent in simple fitting = 3.81"
[Fri Oct 14 17:04:36 2011] source mask rpix=7.7, npix_max = 271, mask sum = 256, frac = 0.942
[Fri Oct 14 17:04:36 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 3.81"
[Fri Oct 14 17:04:40 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src47.ximg exists
[Fri Oct 14 17:04:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src47.csv
[Fri Oct 14 17:04:40 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src47_1.ximg exists
[Fri Oct 14 17:04:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src47.csv
[Fri Oct 14 17:04:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:04:41 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Fri Oct 14 17:04:41 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Oct 14 17:04:41 2011] Fit fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Oct 14 17:05:36 2011] Spatial fit model total counts = 357.484000, observed total counts = 358.000000
[Fri Oct 14 17:05:36 2011] Offset between fit and detection position for source 49 = 1.557088 pixels
[Fri Oct 14 17:05:36 2011] 357.762900 total counts/ 270.868000 bgd. counts: snr = 5.279775
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 1.557088 pixels
  Position = (932.0, 467.3) = 17 50 55.38 -29 41 30.9
  Extent = 3.2 (2.3-4.0)", rotation angle = 0
  Source counts = 86.9 +/- 18.9
  Background counts = 270.9
  Rate = 0.0007 +/- 0.0001
[Fri Oct 14 17:05:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:05:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:05:36 2011] Source does appear to be extended
[Fri Oct 14 17:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:06:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:06:56 2011] Initial guess for spatial extent in simple fitting = 3.16"
[Fri Oct 14 17:06:56 2011] source mask rpix=6.4, npix_max = 192, mask sum = 182, frac = 0.948
[Fri Oct 14 17:06:56 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 3.16"
[Fri Oct 14 17:06:59 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src42.ximg exists
[Fri Oct 14 17:06:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src42.csv
[Fri Oct 14 17:06:59 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src42_1.ximg exists
[Fri Oct 14 17:06:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src42.csv
[Fri Oct 14 17:06:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:07:00 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src42.ximg exists
[Fri Oct 14 17:07:00 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Oct 14 17:07:00 2011] Fit fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src42 appears to have run properly
[Fri Oct 14 17:07:48 2011] Warning, spatial fit 42 centroid is now closest to src. 51
[Fri Oct 14 17:07:49 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:07:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:07:49 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:07:49 2011] Source does appear to be extended
[Fri Oct 14 17:07:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:09:16 2011] Not overwriting source region fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_src.reg
[Fri Oct 14 17:09:16 2011] Extracting stamp from image fullrun_ccd0_acisf09501_pi14-548_cl_sm2.00.img.gz, (787, 323) - (1077, 612)
[Fri Oct 14 17:09:16 2011] Writing fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49.gif
[Fri Oct 14 17:29:43 2011] ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_src.evt and ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_bgd.evt exist, delete to re-create
[Fri Oct 14 17:29:43 2011] Size of ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_src.evt.gz[events] = 229 counts
[Fri Oct 14 17:29:43 2011] Mean chipx,y = (160.07, 436.42)
[Fri Oct 14 17:29:43 2011] Mean tdetx,y = (3497.42, 4971.93)
[Fri Oct 14 17:29:43 2011] chipx,y range = (125.00-200.00, 400.00-471.00)
[Fri Oct 14 17:29:43 2011] Size of ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_bgd.evt.gz[events] = 1504 counts
[Fri Oct 14 17:29:43 2011] ../../acisf09501/products/images/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_src.img and ../../acisf09501/products/images/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_bgd.img exist, delete to re-create
[Fri Oct 14 17:29:43 2011] Not generating rmf since there are only 86 counts
[Fri Oct 14 17:29:43 2011] arf not found, will run specextract
[Fri Oct 14 17:30:05 2011] ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49.warf not found
[Fri Oct 14 17:30:05 2011] ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49.wrmf not found
[Fri Oct 14 17:30:05 2011] Removal of ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49.soff failed
[Fri Oct 14 17:30:12 2011] ../../acisf09501/products/lightcurves/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_src.lc and ../../acisf09501/products/lightcurves/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_bgd.lc exist, delete to re-create
[Fri Oct 14 17:32:57 2011] Spectrum 49 has only 87 counts, deleting rmf
[Fri Oct 14 17:32:57 2011] 159.876
[Fri Oct 14 20:15:06 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:15:06 2011] Error reading totcts from fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_src.pi.gz
[Fri Oct 14 20:15:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:15:07 2011] Using photon index=1.80, rate=0.000663, arf fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49.arf
[Fri Oct 14 20:15:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 20:15:07 2011] Updating source flux to 1.1e-14
[Fri Oct 14 20:15:23 2011] Source 49 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 20:15:35 2011] acisf09501/analysis//spectral/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete