[Fri Oct 14 17:00:33 2011] Detection parameters:
  Position = (602.2, 676.7) = 17 51 7.82 -29 39 47.8
  Extent = 1.0" x 0.7", rotation angle = 142 degrees
  Source counts = 15.6 +/- 5.0
  Background counts = 9.4
  Rate = 0.0001 +/- 4e-05

[Fri Oct 14 17:00:35 2011] Off-axis axis estimate = 6.13'
[Fri Oct 14 17:04:36 2011] Using EEF radius (= 1.70 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:04:36 2011] Initial guess for spatial extent in simple fitting = 1.70"
[Fri Oct 14 17:04:36 2011] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.026
[Fri Oct 14 17:04:36 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 1.70"
[Fri Oct 14 17:04:39 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src35.ximg exists
[Fri Oct 14 17:04:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src35.csv
[Fri Oct 14 17:04:40 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src35_1.ximg exists
[Fri Oct 14 17:04:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src35.csv
[Fri Oct 14 17:04:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:04:41 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Fri Oct 14 17:04:41 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Oct 14 17:04:41 2011] Fit fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Oct 14 17:05:36 2011] Spatial fit model total counts = 65.150700, observed total counts = 67.000000
[Fri Oct 14 17:05:36 2011] Offset between fit and detection position for source 36 = 0.428350 pixels
[Fri Oct 14 17:05:36 2011] 65.980900 total counts/ 51.847000 bgd. counts: snr = 1.962909
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.428350 pixels
  Position = (602.5, 676.5) = 17 51 7.82 -29 39 48.2
  Extent = 0.7 (0.4-1.4)", rotation angle = 0
  Source counts = 14.1 +/- 8.1
  Background counts = 51.8
  Rate = 0.0001 +/- 6e-05
[Fri Oct 14 17:05:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:05:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:05:36 2011] Source does appear to be extended
[Fri Oct 14 17:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:06:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:06:56 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Oct 14 17:06:56 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 1.000
[Fri Oct 14 17:06:56 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.74"
[Fri Oct 14 17:06:58 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src30.ximg exists
[Fri Oct 14 17:06:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src30.csv
[Fri Oct 14 17:06:59 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src30_1.ximg exists
[Fri Oct 14 17:06:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src30.csv
[Fri Oct 14 17:06:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:06:59 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Fri Oct 14 17:06:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src30.csv
[Fri Oct 14 17:06:59 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Oct 14 17:06:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src30.csv
[Fri Oct 14 17:06:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:07:48 2011] Warning, spatial fit 30 centroid is now closest to src. 50
[Fri Oct 14 17:07:49 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:07:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:07:49 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:07:49 2011] Source does appear to be extended
[Fri Oct 14 17:07:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:09:16 2011] Not overwriting source region fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_src.reg
[Fri Oct 14 17:09:16 2011] Extracting stamp from image fullrun_ccd0_acisf09501_pi14-548_cl_sm2.00.img.gz, (569, 643) - (636, 710)
[Fri Oct 14 17:09:16 2011] Writing fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36.gif
[Fri Oct 14 17:23:55 2011] ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_src.evt and ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Fri Oct 14 17:23:55 2011] Size of ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_src.evt.gz[events] = 25 counts
[Fri Oct 14 17:23:55 2011] Mean chipx,y = (523.68, 599.92)
[Fri Oct 14 17:23:55 2011] Mean tdetx,y = (3660.92, 4608.32)
[Fri Oct 14 17:23:55 2011] chipx,y range = (502.00-535.00, 578.00-615.00)
[Fri Oct 14 17:23:55 2011] Size of ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 99 counts
[Fri Oct 14 17:23:55 2011] ../../acisf09501/products/images/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_src.img and ../../acisf09501/products/images/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Fri Oct 14 17:23:55 2011] Not generating rmf since there are only 14 counts
[Fri Oct 14 17:23:55 2011] arf not found, will run specextract
[Fri Oct 14 17:24:25 2011] ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36.warf not found
[Fri Oct 14 17:24:25 2011] ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36.wrmf not found
[Fri Oct 14 17:24:25 2011] Removal of ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36.soff failed
[Fri Oct 14 17:24:31 2011] ../../acisf09501/products/lightcurves/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_src.lc and ../../acisf09501/products/lightcurves/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Fri Oct 14 17:32:57 2011] Spectrum 36 has only 14 counts, deleting rmf
[Fri Oct 14 17:32:57 2011] 167.256
[Fri Oct 14 20:15:06 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:15:06 2011] Error reading totcts from fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_src.pi.gz
[Fri Oct 14 20:15:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:15:07 2011] Using photon index=1.80, rate=0.000108, arf fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36.arf
[Fri Oct 14 20:15:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 20:15:07 2011] Updating source flux to 1.7e-15
[Fri Oct 14 20:15:23 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 20:15:35 2011] acisf09501/analysis//spectral/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete