[Fri Oct 14 17:00:31 2011] Detection parameters:
  Position = (188.4, 1044.9) = 17 51 23.44 -29 36 46.7
  Extent = 1.1" x 0.7", rotation angle = 101 degrees
  Source counts = 19.5 +/- 5.2
  Background counts = 7.5
  Rate = 0.0001 +/- 4e-05

[Fri Oct 14 17:00:35 2011] Off-axis axis estimate = 1.65'
[Fri Oct 14 17:04:36 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:04:36 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Oct 14 17:04:36 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.868
[Fri Oct 14 17:04:36 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.40"
[Fri Oct 14 17:04:39 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src21.ximg exists
[Fri Oct 14 17:04:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src21.csv
[Fri Oct 14 17:04:39 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src21_1.ximg exists
[Fri Oct 14 17:04:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src21.csv
[Fri Oct 14 17:04:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:04:40 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Fri Oct 14 17:04:40 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Oct 14 17:04:40 2011] Fit fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Oct 14 17:05:36 2011] Spatial fit model total counts = 34.726700, observed total counts = 35.000000
[Fri Oct 14 17:05:36 2011] Offset between fit and detection position for source 22 = 1.372883 pixels
[Fri Oct 14 17:05:36 2011] 35.488600 total counts/ 21.501900 bgd. counts: snr = 3.016316
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.372883 pixels
  Position = (188.9, 1046.2) = 17 51 23.44 -29 36 46.3
  Extent = 0.5 (0.4-0.9)", rotation angle = 0
  Source counts = 14.0 +/- 6.0
  Background counts = 21.5
  Rate = 0.0001 +/- 5e-05
[Fri Oct 14 17:05:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:05:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:05:36 2011] Source does appear to be extended
[Fri Oct 14 17:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:06:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:06:56 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Fri Oct 14 17:06:56 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.876
[Fri Oct 14 17:06:56 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.54"
[Fri Oct 14 17:06:58 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src19.ximg exists
[Fri Oct 14 17:06:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src19.csv
[Fri Oct 14 17:06:58 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src19_1.ximg exists
[Fri Oct 14 17:06:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src19.csv
[Fri Oct 14 17:06:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:06:59 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Fri Oct 14 17:06:59 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Oct 14 17:06:59 2011] Fit fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Oct 14 17:07:48 2011] Spatial fit model total counts = 32.975500, observed total counts = 33.000000
[Fri Oct 14 17:07:48 2011] Offset between fit and detection position for source 22 = 0.029878 pixels
[Fri Oct 14 17:07:48 2011] 33.130100 total counts/ 18.440900 bgd. counts: snr = 3.420638
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.029878 pixels
  Position = (188.9, 1046.3) = 17 51 23.44 -29 36 46.3
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 14.7 +/- 5.8
  Background counts = 18.4
  Rate = 0.0001 +/- 4e-05
[Fri Oct 14 17:07:49 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:07:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:07:49 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:07:49 2011] Source does appear to be extended
[Fri Oct 14 17:07:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:09:15 2011] Not overwriting source region fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_src.reg
[Fri Oct 14 17:09:15 2011] Extracting stamp from image fullrun_ccd0_acisf09501_pi14-548_cl_sm2.00.img.gz, (163, 1020) - (215, 1072)
[Fri Oct 14 17:09:15 2011] Writing fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22.gif
[Fri Oct 14 17:18:11 2011] ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_src.evt and ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Fri Oct 14 17:18:11 2011] Size of ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_src.evt.gz[events] = 18 counts
[Fri Oct 14 17:18:11 2011] Mean chipx,y = (987.17, 897.72)
[Fri Oct 14 17:18:11 2011] Mean tdetx,y = (3958.72, 4144.83)
[Fri Oct 14 17:18:11 2011] chipx,y range = (971.00-1005.00, 878.00-913.00)
[Fri Oct 14 17:18:11 2011] Size of ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 64 counts
[Fri Oct 14 17:18:11 2011] ../../acisf09501/products/images/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_src.img and ../../acisf09501/products/images/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Fri Oct 14 17:18:11 2011] Not generating rmf since there are only 14 counts
[Fri Oct 14 17:18:11 2011] arf not found, will run specextract
[Fri Oct 14 17:18:37 2011] ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22.warf not found
[Fri Oct 14 17:18:37 2011] ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22.wrmf not found
[Fri Oct 14 17:18:37 2011] Removal of ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22.soff failed
[Fri Oct 14 17:18:43 2011] ../../acisf09501/products/lightcurves/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_src.lc and ../../acisf09501/products/lightcurves/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Fri Oct 14 17:32:57 2011] Spectrum 22 has only 15 counts, deleting rmf
[Fri Oct 14 17:32:57 2011] 201.406
[Fri Oct 14 20:15:06 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:15:06 2011] Error reading totcts from fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_src.pi.gz
[Fri Oct 14 20:15:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:15:07 2011] Using photon index=1.80, rate=0.000112, arf fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22.arf
[Fri Oct 14 20:15:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 20:15:07 2011] Updating source flux to 1.5e-15
[Fri Oct 14 20:15:23 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 20:15:35 2011] acisf09501/analysis//spectral/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete