[Fri Oct 14 17:00:31 2011] Detection parameters:
  Position = (318.4, 951.8) = 17 51 18.53 -29 37 32.5
  Extent = 1.2" x 0.6", rotation angle = 164 degrees
  Source counts = 31.0 +/- 6.6
  Background counts = 13.0
  Rate = 0.0002 +/- 5e-05

[Fri Oct 14 17:00:35 2011] Off-axis axis estimate = 2.90'
[Fri Oct 14 17:04:36 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:04:36 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct 14 17:04:36 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.839
[Fri Oct 14 17:04:36 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.56"
[Fri Oct 14 17:04:39 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src15.ximg exists
[Fri Oct 14 17:04:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src15.csv
[Fri Oct 14 17:04:39 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Oct 14 17:04:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src15.csv
[Fri Oct 14 17:04:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09501_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:04:40 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Oct 14 17:04:40 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Oct 14 17:04:40 2011] Fit fullrun_ccd0_acisf09501_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Oct 14 17:05:36 2011] Spatial fit model total counts = 54.428500, observed total counts = 55.000000
[Fri Oct 14 17:05:36 2011] Offset between fit and detection position for source 15 = 0.521270 pixels
[Fri Oct 14 17:05:36 2011] 54.087500 total counts/ 27.689500 bgd. counts: snr = 5.016646
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.521270 pixels
  Position = (318.9, 952.1) = 17 51 18.53 -29 37 32.6
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 26.4 +/- 7.4
  Background counts = 27.7
  Rate = 0.0002 +/- 6e-05
[Fri Oct 14 17:05:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:05:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:05:36 2011] Source does appear to be extended
[Fri Oct 14 17:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:06:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:06:56 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Oct 14 17:06:56 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.005
[Fri Oct 14 17:06:56 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.74"
[Fri Oct 14 17:06:58 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src13.ximg exists
[Fri Oct 14 17:06:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src13.csv
[Fri Oct 14 17:06:58 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Oct 14 17:06:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src13.csv
[Fri Oct 14 17:06:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09501_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:06:59 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct 14 17:06:59 2011] fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct 14 17:06:59 2011] Fit fullrun_ccd0_acisf09501_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct 14 17:07:48 2011] Spatial fit model total counts = 55.023800, observed total counts = 55.000000
[Fri Oct 14 17:07:48 2011] Offset between fit and detection position for source 15 = 0.017982 pixels
[Fri Oct 14 17:07:48 2011] 54.670800 total counts/ 28.151300 bgd. counts: snr = 4.998228
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.017982 pixels
  Position = (318.9, 952.1) = 17 51 18.53 -29 37 32.6
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 26.5 +/- 7.4
  Background counts = 28.2
  Rate = 0.0002 +/- 6e-05
[Fri Oct 14 17:07:49 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:07:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:07:49 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:07:49 2011] Source does appear to be extended
[Fri Oct 14 17:07:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:09:15 2011] Not overwriting source region fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_src.reg
[Fri Oct 14 17:09:15 2011] Extracting stamp from image fullrun_ccd0_acisf09501_pi14-548_cl_sm2.00.img.gz, (287, 920) - (351, 984)
[Fri Oct 14 17:09:15 2011] Writing fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15.gif
[Fri Oct 14 17:14:51 2011] ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_src.evt and ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Fri Oct 14 17:14:51 2011] Size of ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_src.evt.gz[events] = 40 counts
[Fri Oct 14 17:14:51 2011] Mean chipx,y = (846.70, 823.17)
[Fri Oct 14 17:14:51 2011] Mean tdetx,y = (3884.18, 4285.30)
[Fri Oct 14 17:14:51 2011] chipx,y range = (825.00-865.00, 804.00-840.00)
[Fri Oct 14 17:14:51 2011] Size of ../../acisf09501/products/events/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 184 counts
[Fri Oct 14 17:14:51 2011] ../../acisf09501/products/images/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_src.img and ../../acisf09501/products/images/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Fri Oct 14 17:14:51 2011] Not generating rmf since there are only 26 counts
[Fri Oct 14 17:14:51 2011] arf not found, will run specextract
[Fri Oct 14 17:15:17 2011] ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15.warf not found
[Fri Oct 14 17:15:17 2011] ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15.wrmf not found
[Fri Oct 14 17:15:17 2011] Removal of ../../acisf09501/products/spectra/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15.soff failed
[Fri Oct 14 17:15:26 2011] ../../acisf09501/products/lightcurves/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_src.lc and ../../acisf09501/products/lightcurves/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Fri Oct 14 17:32:57 2011] Spectrum 15 has only 27 counts, deleting rmf
[Fri Oct 14 17:32:57 2011] 197.743
[Fri Oct 14 20:15:06 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:15:06 2011] Error reading totcts from fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_src.pi.gz
[Fri Oct 14 20:15:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:15:06 2011] Using photon index=1.80, rate=0.000202, arf fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15.arf
[Fri Oct 14 20:15:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 20:15:06 2011] Updating source flux to 2.8e-15
[Fri Oct 14 20:15:23 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 20:15:35 2011] acisf09501/analysis//spectral/fullrun_ccd0_acisf09501_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete