[Sat Oct 29 20:49:09 2011] Detection parameters:
  Position = (164.2, 972.4) = 10 43 35.81 -59 16 37.3
  Extent = 2.3" x 1.8", rotation angle = 45 degrees
  Source counts = 15.4 +/- 4.8
  Background counts = 7.6
  Rate = 0.0005 +/- 0.0002

[Sat Oct 29 20:49:09 2011] Off-axis axis estimate = 10.23'
[Sat Oct 29 20:50:27 2011] Using EEF radius (= 4.64 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 20:50:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 20:50:27 2011] Initial guess for spatial extent in simple fitting = 4.64"
[Sat Oct 29 20:50:27 2011] source mask rpix=9.4, npix_max = 393, mask sum = 400, frac = 1.016
[Sat Oct 29 20:50:27 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 4.64"
[Sat Oct 29 20:50:28 2011] fullrun_ccd3_acisf09499_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct 29 20:50:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09499_pi14-548_cl_pass0_src11.csv
[Sat Oct 29 20:50:28 2011] fullrun_ccd3_acisf09499_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct 29 20:50:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09499_pi14-548_cl_pass0_src11.csv
[Sat Oct 29 20:50:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09499_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09499_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 20:50:29 2011] fullrun_ccd3_acisf09499_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct 29 20:50:29 2011] fullrun_ccd3_acisf09499_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct 29 20:50:29 2011] Fit fullrun_ccd3_acisf09499_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Oct 29 20:50:44 2011] Spatial fit model total counts = 54.888000, observed total counts = 54.000000
[Sat Oct 29 20:50:44 2011] Offset between fit and detection position for source 38 = 2.381628 pixels
[Sat Oct 29 20:50:44 2011] 54.663700 total counts/ 43.259200 bgd. counts: snr = 1.733952
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.381628 pixels
  Position = (165.3, 974.4) = 10 43 35.76 -59 16 36.6
  Extent = 1.2" x 1.2", rotation angle = 0
  Source counts = 11.4 +/- 7.4
  Background counts = 43.3
  Rate = 0.0004 +/- 0.0002
  Deleting source due to low Poisson probability