[Tue Oct 25 17:36:29 2011] Detection parameters:
  Position = (814.8, 612.2) = 10 44 49.74 -60 21 22.7
  Extent = 0.8" x 0.6", rotation angle = 4 degrees
  Source counts = 47.5 +/- 7.0
  Background counts = 1.5
  Rate = 0.002 +/- 0.0002

[Tue Oct 25 17:36:30 2011] Off-axis axis estimate = 4.62'
[Tue Oct 25 17:37:27 2011] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 17:37:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 17:37:27 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Tue Oct 25 17:37:27 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.922
[Tue Oct 25 17:37:27 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.03"
[Tue Oct 25 17:37:27 2011] fullrun_ccd3_acisf09495_pi14-548_cl_pass0_src2.ximg exists
[Tue Oct 25 17:37:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09495_pi14-548_cl_pass0_src2.csv
[Tue Oct 25 17:37:27 2011] fullrun_ccd3_acisf09495_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Oct 25 17:37:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09495_pi14-548_cl_pass0_src2.csv
[Tue Oct 25 17:37:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09495_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09495_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 17:37:27 2011] fullrun_ccd3_acisf09495_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Oct 25 17:37:27 2011] fullrun_ccd3_acisf09495_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Oct 25 17:37:27 2011] Fit fullrun_ccd3_acisf09495_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Oct 25 17:37:38 2011] Spatial fit model total counts = 49.514200, observed total counts = 51.000000
[Tue Oct 25 17:37:38 2011] Offset between fit and detection position for source 13 = 0.512917 pixels
[Tue Oct 25 17:37:38 2011] 50.312770 total counts/ 6.974270 bgd. counts: snr = 16.410601
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.512917 pixels
  Position = (814.9, 612.7) = 10 44 49.77 -60 21 22.7
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 43.3 +/- 7.1
  Background counts = 7.0
  Rate = 0.001 +/- 0.0002
[Tue Oct 25 17:37:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 17:37:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 17:37:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 17:37:38 2011] Source does appear to be extended
[Tue Oct 25 17:37:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 17:37:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 17:37:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 17:37:59 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Tue Oct 25 17:37:59 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Tue Oct 25 17:37:59 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.78"
[Tue Oct 25 17:38:00 2011] fullrun_ccd3_acisf09495_pi14-548_cl_pass1_src2.ximg exists
[Tue Oct 25 17:38:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09495_pi14-548_cl_pass1_src2.csv
[Tue Oct 25 17:38:00 2011] fullrun_ccd3_acisf09495_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Oct 25 17:38:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09495_pi14-548_cl_pass1_src2.csv
[Tue Oct 25 17:38:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09495_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09495_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 17:38:00 2011] fullrun_ccd3_acisf09495_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Oct 25 17:38:00 2011] fullrun_ccd3_acisf09495_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Oct 25 17:38:00 2011] Fit fullrun_ccd3_acisf09495_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Oct 25 17:38:10 2011] Spatial fit model total counts = 46.911700, observed total counts = 50.000000
[Tue Oct 25 17:38:10 2011] Offset between fit and detection position for source 13 = 0.018766 pixels
[Tue Oct 25 17:38:10 2011] 47.927630 total counts/ 3.539630 bgd. counts: snr = 23.593189
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.018766 pixels
  Position = (814.9, 612.7) = 10 44 49.77 -60 21 22.7
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 44.4 +/- 6.9
  Background counts = 3.5
  Rate = 0.001 +/- 0.0002
[Tue Oct 25 17:38:10 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 17:38:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 17:38:10 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 17:38:10 2011] Source does appear to be extended
[Tue Oct 25 17:38:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 17:41:07 2011] Not overwriting source region fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_src.reg
[Tue Oct 25 17:41:07 2011] Extracting stamp from image fullrun_ccd3_acisf09495_pi14-548_cl_sm2.00.img.gz, (778, 576) - (851, 649)
[Tue Oct 25 17:41:07 2011] Writing fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13.gif
[Tue Oct 25 17:41:12 2011] ../../acisf09495/products/events/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_src.evt and ../../acisf09495/products/events/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Tue Oct 25 17:41:12 2011] Size of ../../acisf09495/products/events/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_src.evt.gz[events] = 49 counts
[Tue Oct 25 17:41:12 2011] Mean chipx,y = (666.33, 537.88)
[Tue Oct 25 17:41:12 2011] Mean tdetx,y = (4594.12, 3727.33)
[Tue Oct 25 17:41:12 2011] chipx,y range = (648.00-684.00, 517.00-555.00)
[Tue Oct 25 17:41:12 2011] Size of ../../acisf09495/products/events/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 8 counts
[Tue Oct 25 17:41:12 2011] ../../acisf09495/products/images/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_src.img and ../../acisf09495/products/images/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Tue Oct 25 17:41:12 2011] ../../acisf09495/products/spectra/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_src.pi and ../../acisf09495/products/spectra/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Tue Oct 25 17:41:12 2011] Not generating rmf since there are only 44 counts
[Tue Oct 25 17:41:15 2011] ../../acisf09495/products/lightcurves/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_src.lc and ../../acisf09495/products/lightcurves/fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Tue Oct 25 17:42:13 2011] 188.667
[Tue Oct 25 17:42:21 2011] Updating aperture counts using extracted products
[Tue Oct 25 17:42:21 2011] Error reading totcts from fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13_src.pi.gz
[Tue Oct 25 17:42:21 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 17:42:21 2011] Using photon index=1.80, rate=0.00143, arf fullrun_ccd3_acisf09495_pi14-548_pass1_cl_src13.arf
[Tue Oct 25 17:42:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 17:42:21 2011] Updating source flux to 2.4e-14
[Tue Oct 25 17:42:37 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting