[Mon Sep 26 14:51:54 2011] Detection parameters:
  Position = (699.4, 572.5) = 10 46 4.26 -60 26 24.4
  Extent = 2.5" x 1.2", rotation angle = 163 degrees
  Source counts = 15.8 +/- 4.8
  Background counts = 7.2
  Rate = 0.0004 +/- 0.0001

[Mon Sep 26 14:51:55 2011] Off-axis axis estimate = 7.49'
[Mon Sep 26 14:53:32 2011] Using EEF radius (= 2.48 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 14:53:32 2011] Initial guess for spatial extent in simple fitting = 2.48"
[Mon Sep 26 14:53:32 2011] source mask rpix=5.0, npix_max = 123, mask sum = 121, frac = 0.983
[Mon Sep 26 14:53:32 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 2.48"
[Mon Sep 26 14:53:34 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src13.ximg exists
[Mon Sep 26 14:53:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src13.csv
[Mon Sep 26 14:53:34 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Sep 26 14:53:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src13.csv
[Mon Sep 26 14:53:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 14:53:34 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Sep 26 14:53:34 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Sep 26 14:53:34 2011] Fit fullrun_ccd0_acisf09494_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Sep 26 14:53:56 2011] Spatial fit model total counts = 37.999100, observed total counts = 38.000000
[Mon Sep 26 14:53:56 2011] Offset between fit and detection position for source 19 = 2.800591 pixels
[Mon Sep 26 14:53:56 2011] 38.336100 total counts/ 24.133500 bgd. counts: snr = 2.891064
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.800591 pixels
  Position = (697.0, 573.9) = 10 46 4.46 -60 26 24.0
  Extent = 1.6 (0.9-2.8)", rotation angle = 0
  Source counts = 14.2 +/- 6.2
  Background counts = 24.1
  Rate = 0.0004 +/- 0.0002
[Mon Sep 26 14:53:56 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 14:53:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 14:53:56 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 14:53:56 2011] Source does appear to be extended
[Mon Sep 26 14:53:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 14:54:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 14:54:31 2011] Initial guess for spatial extent in simple fitting = 1.65"
[Mon Sep 26 14:54:31 2011] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.080
[Mon Sep 26 14:54:31 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.65"
[Mon Sep 26 14:54:32 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src13.ximg exists
[Mon Sep 26 14:54:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src13.csv
[Mon Sep 26 14:54:32 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Sep 26 14:54:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src13.csv
[Mon Sep 26 14:54:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 14:54:32 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Sep 26 14:54:32 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Sep 26 14:54:32 2011] Fit fullrun_ccd0_acisf09494_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Sep 26 14:54:49 2011] Spatial fit model total counts = 25.949100, observed total counts = 26.000000
[Mon Sep 26 14:54:49 2011] Offset between fit and detection position for source 19 = 1.032320 pixels
[Mon Sep 26 14:54:49 2011] 26.326300 total counts/ 14.889000 bgd. counts: snr = 2.964086
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.032320 pixels
  Position = (696.0, 574.3) = 10 46 4.52 -60 26 23.7
  Extent = 1.3 (0.8-2.0)", rotation angle = 0
  Source counts = 11.4 +/- 5.1
  Background counts = 14.9
  Rate = 0.0003 +/- 0.0001
[Mon Sep 26 14:54:49 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 14:54:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 14:54:49 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 14:54:49 2011] Source does appear to be extended
[Mon Sep 26 14:54:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 14:55:24 2011] Not overwriting source region fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_src.reg
[Mon Sep 26 14:55:24 2011] Extracting stamp from image fullrun_ccd0_acisf09494_pi14-548_cl_sm2.00.img.gz, (634, 513) - (758, 636)
[Mon Sep 26 14:55:24 2011] Writing fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19.gif
[Mon Sep 26 14:56:06 2011] ../../acisf09494/products/events/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_src.evt and ../../acisf09494/products/events/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Mon Sep 26 14:56:06 2011] Size of ../../acisf09494/products/events/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_src.evt.gz[events] = 18 counts
[Mon Sep 26 14:56:06 2011] Mean chipx,y = (363.78, 537.39)
[Mon Sep 26 14:56:06 2011] Mean tdetx,y = (3598.39, 4768.22)
[Mon Sep 26 14:56:06 2011] chipx,y range = (344.00-383.00, 518.00-555.00)
[Mon Sep 26 14:56:06 2011] Size of ../../acisf09494/products/events/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 79 counts
[Mon Sep 26 14:56:06 2011] ../../acisf09494/products/images/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_src.img and ../../acisf09494/products/images/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Mon Sep 26 14:56:06 2011] ../../acisf09494/products/spectra/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_src.pi and ../../acisf09494/products/spectra/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Mon Sep 26 14:56:06 2011] Not generating rmf since there are only 11 counts
[Mon Sep 26 14:56:09 2011] ../../acisf09494/products/lightcurves/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_src.lc and ../../acisf09494/products/lightcurves/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Mon Sep 26 14:56:17 2011] 174.659
[Mon Sep 26 15:02:16 2011] Updating aperture counts using extracted products
[Mon Sep 26 15:02:16 2011] Error reading totcts from fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19_src.pi.gz
[Mon Sep 26 15:02:16 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 15:02:16 2011] Using photon index=1.80, rate=0.000313, arf fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src19.arf
[Mon Sep 26 15:02:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 15:02:16 2011] Updating source flux to 5.5e-15
[Mon Sep 26 15:02:24 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting