[Mon Sep 26 14:51:50 2011] Detection parameters:
  Position = (465.6, 606.7) = 10 46 19.82 -60 26 7.9
  Extent = 0.9" x 0.7", rotation angle = 145 degrees
  Source counts = 15.8 +/- 4.4
  Background counts = 3.2
  Rate = 0.0004 +/- 0.0001

[Mon Sep 26 14:51:55 2011] Off-axis axis estimate = 5.76'
[Mon Sep 26 14:53:32 2011] Using EEF radius (= 1.51 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 14:53:32 2011] Initial guess for spatial extent in simple fitting = 1.51"
[Mon Sep 26 14:53:32 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.960
[Mon Sep 26 14:53:32 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.51"
[Mon Sep 26 14:53:33 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src7.ximg exists
[Mon Sep 26 14:53:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src7.csv
[Mon Sep 26 14:53:33 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src7_1.ximg exists
[Mon Sep 26 14:53:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src7.csv
[Mon Sep 26 14:53:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09494_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 14:53:34 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Mon Sep 26 14:53:34 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Sep 26 14:53:34 2011] Fit fullrun_ccd0_acisf09494_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Sep 26 14:53:56 2011] Spatial fit model total counts = 37.737200, observed total counts = 37.000000
[Mon Sep 26 14:53:56 2011] Offset between fit and detection position for source 10 = 1.186865 pixels
[Mon Sep 26 14:53:56 2011] 37.234400 total counts/ 17.186400 bgd. counts: snr = 4.835914
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.186865 pixels
  Position = (465.8, 607.9) = 10 46 19.83 -60 26 7.6
  Extent = 1.3 (0.4-2.1)", rotation angle = 0
  Source counts = 20.0 +/- 6.1
  Background counts = 17.2
  Rate = 0.0005 +/- 0.0002
[Mon Sep 26 14:53:56 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 14:53:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 14:53:56 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 14:53:56 2011] Source does appear to be extended
[Mon Sep 26 14:53:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 14:54:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 14:54:31 2011] Initial guess for spatial extent in simple fitting = 1.31"
[Mon Sep 26 14:54:31 2011] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.901
[Mon Sep 26 14:54:31 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.31"
[Mon Sep 26 14:54:32 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src7.ximg exists
[Mon Sep 26 14:54:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src7.csv
[Mon Sep 26 14:54:32 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src7_1.ximg exists
[Mon Sep 26 14:54:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src7.csv
[Mon Sep 26 14:54:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09494_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 14:54:32 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Mon Sep 26 14:54:32 2011] fullrun_ccd0_acisf09494_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Sep 26 14:54:32 2011] Fit fullrun_ccd0_acisf09494_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Sep 26 14:54:49 2011] Spatial fit model total counts = 30.948300, observed total counts = 31.000000
[Mon Sep 26 14:54:49 2011] Offset between fit and detection position for source 10 = 0.489194 pixels
[Mon Sep 26 14:54:49 2011] 30.718690 total counts/ 6.843890 bgd. counts: snr = 9.126163
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.489194 pixels
  Position = (465.5, 608.2) = 10 46 19.85 -60 26 7.4
  Extent = 1.5 (0.8-2.3)", rotation angle = 0
  Source counts = 23.9 +/- 5.5
  Background counts = 6.8
  Rate = 0.0007 +/- 0.0002
[Mon Sep 26 14:54:49 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 14:54:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 14:54:49 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 14:54:49 2011] Source does appear to be extended
[Mon Sep 26 14:54:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 14:55:24 2011] Not overwriting source region fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_src.reg
[Mon Sep 26 14:55:24 2011] Extracting stamp from image fullrun_ccd0_acisf09494_pi14-548_cl_sm2.00.img.gz, (396, 539) - (535, 677)
[Mon Sep 26 14:55:24 2011] Writing fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10.gif
[Mon Sep 26 14:55:45 2011] ../../acisf09494/products/events/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_src.evt and ../../acisf09494/products/events/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Sep 26 14:55:45 2011] Size of ../../acisf09494/products/events/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_src.evt.gz[events] = 32 counts
[Mon Sep 26 14:55:45 2011] Mean chipx,y = (593.62, 582.06)
[Mon Sep 26 14:55:45 2011] Mean tdetx,y = (3643.06, 4538.38)
[Mon Sep 26 14:55:45 2011] chipx,y range = (571.00-621.00, 563.00-600.00)
[Mon Sep 26 14:55:46 2011] Size of ../../acisf09494/products/events/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 195 counts
[Mon Sep 26 14:55:46 2011] ../../acisf09494/products/images/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_src.img and ../../acisf09494/products/images/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Sep 26 14:55:46 2011] ../../acisf09494/products/spectra/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_src.pi and ../../acisf09494/products/spectra/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Sep 26 14:55:46 2011] Not generating rmf since there are only 23 counts
[Mon Sep 26 14:55:49 2011] ../../acisf09494/products/lightcurves/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_src.lc and ../../acisf09494/products/lightcurves/fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Sep 26 14:56:17 2011] 172.38
[Mon Sep 26 15:02:16 2011] Updating aperture counts using extracted products
[Mon Sep 26 15:02:16 2011] Error reading totcts from fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Sep 26 15:02:16 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 15:02:16 2011] Using photon index=1.80, rate=0.000653, arf fullrun_ccd0_acisf09494_pi14-548_pass1_cl_src10.arf
[Mon Sep 26 15:02:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 15:02:16 2011] Updating source flux to 1.2e-14
[Mon Sep 26 15:02:24 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting