[Tue Sep 27 11:45:09 2011] Detection parameters:
  Position = (883.2, 826.8) = 10 47 18.45 -60 7 47.8
  Extent = 0.8" x 0.5", rotation angle = 75 degrees
  Source counts = 10.2 +/- 3.5
  Background counts = 1.8
  Rate = 0.0002 +/- 6e-05

[Tue Sep 27 11:45:10 2011] Off-axis axis estimate = 2.23'
[Tue Sep 27 11:47:18 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:47:18 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Tue Sep 27 11:47:18 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.105
[Tue Sep 27 11:47:18 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 0.46"
[Tue Sep 27 11:47:20 2011] fullrun_ccd3_acisf09485_pi14-548_cl_pass0_src65.ximg exists
[Tue Sep 27 11:47:20 2011] fullrun_ccd3_acisf09485_pi14-548_cl_pass0_src65_1.ximg exists
[Tue Sep 27 11:47:20 2011] Fit fullrun_ccd3_acisf09485_pi14-548_cl_pass0_src65 appears to have run properly
[Tue Sep 27 11:47:25 2011] fullrun_ccd3_acisf09485_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Tue Sep 27 11:47:25 2011] fullrun_ccd3_acisf09485_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Tue Sep 27 11:47:25 2011] Fit fullrun_ccd3_acisf09485_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Tue Sep 27 11:48:11 2011] Spatial fit model total counts = 14.364800, observed total counts = 15.000000
[Tue Sep 27 11:48:11 2011] Offset between fit and detection position for source 83 = 1.324406 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 1.324406 pixels
  Position = (883.8, 827.9) = 10 47 18.44 -60 7 47.5
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 12.9 +/- 3.6
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Tue Sep 27 11:48:11 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 11:48:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 11:48:11 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 11:48:11 2011] Source does appear to be extended
[Tue Sep 27 11:48:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 11:49:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:49:18 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Tue Sep 27 11:49:18 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Tue Sep 27 11:49:18 2011] Giving source the simple spatial ID 64 for pass 1, mean size = 0.82"
[Tue Sep 27 11:49:24 2011] fullrun_ccd3_acisf09485_pi14-548_cl_pass1_src64.ximg exists
[Tue Sep 27 11:49:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09485_pi14-548_cl_pass1_src64.csv
[Tue Sep 27 11:49:24 2011] fullrun_ccd3_acisf09485_pi14-548_cl_pass1_src64_1.ximg exists
[Tue Sep 27 11:49:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09485_pi14-548_cl_pass1_src64.csv
[Tue Sep 27 11:49:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09485_pi14-548_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09485_pi14-548_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:49:25 2011] fullrun_ccd3_acisf09485_pi14-548_cl_pass1_tfrozen_src64.ximg exists
[Tue Sep 27 11:49:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09485_pi14-548_cl_pass1_tfrozen_src64.csv
[Tue Sep 27 11:49:25 2011] fullrun_ccd3_acisf09485_pi14-548_cl_pass1_tfrozen_src64_1.ximg exists
[Tue Sep 27 11:49:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09485_pi14-548_cl_pass1_tfrozen_src64.csv
[Tue Sep 27 11:49:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09485_pi14-548_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09485_pi14-548_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:50:19 2011] Spatial fit model total counts = 12.870500, observed total counts = 14.000000
[Tue Sep 27 11:50:19 2011] Offset between fit and detection position for source 83 = 0.123170 pixels
[Tue Sep 27 11:50:19 2011] 11.951500 total counts/ 0.000000 bgd. counts: snr = 1884351742756.810059
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.123170 pixels
  Position = (883.8, 827.8) = 10 47 18.44 -60 7 47.5
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 12.0 +/- 3.5
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Tue Sep 27 11:50:19 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 11:50:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 11:50:19 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 11:50:19 2011] Source does appear to be extended
[Tue Sep 27 11:50:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:58:26 2011] Writing source region out to fullrun_ccd3_acisf09485_pi14-548_pass1_cl_src83_src.reg
[Tue Sep 27 13:58:26 2011] Extracting stamp from image fullrun_ccd3_acisf09485_pi14-548_cl_sm2.00.img.gz, (850, 793) - (918, 862)
[Tue Sep 27 13:58:26 2011] Writing fullrun_ccd3_acisf09485_pi14-548_pass1_cl_src83.gif
[Tue Sep 27 14:41:17 2011] Size of ../../acisf09485/products/events/fullrun_ccd3_acisf09485_pi14-548_pass1_cl_src83_src.evt.gz[events] = 12 counts
[Tue Sep 27 14:41:17 2011] Mean chipx,y = (742.00, 845.83)
[Tue Sep 27 14:41:17 2011] Mean tdetx,y = (4286.17, 3803.00)
[Tue Sep 27 14:41:17 2011] chipx,y range = (723.00-758.00, 834.00-865.00)
[Tue Sep 27 14:41:17 2011] Size of ../../acisf09485/products/events/fullrun_ccd3_acisf09485_pi14-548_pass1_cl_src83_bgd.evt.gz[events] = 38 counts
[Tue Sep 27 14:41:18 2011] Not generating rmf since there are only 11 counts
[Tue Sep 27 14:41:18 2011] arf not found, will run specextract
[Tue Sep 27 14:41:46 2011] ../../acisf09485/products/spectra/fullrun_ccd3_acisf09485_pi14-548_pass1_cl_src83.warf not found
[Tue Sep 27 14:41:46 2011] ../../acisf09485/products/spectra/fullrun_ccd3_acisf09485_pi14-548_pass1_cl_src83.wrmf not found
[Tue Sep 27 14:41:46 2011] Removal of ../../acisf09485/products/spectra/fullrun_ccd3_acisf09485_pi14-548_pass1_cl_src83.soff failed
[Tue Sep 27 14:56:46 2011] Spectrum 83 has only 12 counts, deleting rmf
[Tue Sep 27 14:56:46 2011] 197.519
[Tue Sep 27 14:57:56 2011] Updating aperture counts using extracted products
[Tue Sep 27 14:57:56 2011] Error reading totcts from fullrun_ccd3_acisf09485_pi14-548_pass1_cl_src83_src.pi.gz
[Tue Sep 27 14:57:57 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 14:57:57 2011] Using photon index=1.80, rate=0.000208, arf fullrun_ccd3_acisf09485_pi14-548_pass1_cl_src83.arf
[Tue Sep 27 14:57:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 14:57:57 2011] Updating source flux to 3.3e-15
[Tue Sep 27 14:58:35 2011] Source 83 has fewer than 100.000000 counts, skipping spectral fitting