[Tue Sep 27 11:44:57 2011] Detection parameters:
  Position = (177.3, 928.1) = 10 46 56.52 -60 6 2.8
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 14.6 +/- 4.0
  Background counts = 1.4
  Rate = 0.0003 +/- 7e-05

[Tue Sep 27 11:45:02 2011] Off-axis axis estimate = 1.52'
[Tue Sep 27 11:47:13 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:47:13 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Sep 27 11:47:13 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.888
[Tue Sep 27 11:47:13 2011] Giving source the simple spatial ID 54 for pass 0, mean size = 0.39"
[Tue Sep 27 11:47:16 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass0_src54.ximg exists
[Tue Sep 27 11:47:16 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass0_src54_1.ximg exists
[Tue Sep 27 11:47:16 2011] Fit fullrun_ccd2_acisf09485_pi14-548_cl_pass0_src54 appears to have run properly
[Tue Sep 27 11:47:17 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass0_tfrozen_src54.ximg exists
[Tue Sep 27 11:47:17 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass0_tfrozen_src54_1.ximg exists
[Tue Sep 27 11:47:17 2011] Fit fullrun_ccd2_acisf09485_pi14-548_cl_pass0_tfrozen_src54 appears to have run properly
[Tue Sep 27 11:48:02 2011] Spatial fit model total counts = 21.529400, observed total counts = 23.000000
[Tue Sep 27 11:48:02 2011] Offset between fit and detection position for source 40 = 0.661109 pixels
[Tue Sep 27 11:48:02 2011] 21.927710 total counts/ 7.461210 bgd. counts: snr = 5.296132
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.661109 pixels
  Position = (177.9, 928.4) = 10 46 56.52 -60 6 2.9
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 14.5 +/- 4.7
  Background counts = 7.5
  Rate = 0.0003 +/- 8e-05
[Tue Sep 27 11:48:02 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 11:48:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 11:48:02 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 11:48:02 2011] Source does appear to be extended
[Tue Sep 27 11:48:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 11:49:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:49:13 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Tue Sep 27 11:49:13 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.067
[Tue Sep 27 11:49:13 2011] Giving source the simple spatial ID 54 for pass 1, mean size = 0.47"
[Tue Sep 27 11:49:16 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass1_src54.ximg exists
[Tue Sep 27 11:49:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09485_pi14-548_cl_pass1_src54.csv
[Tue Sep 27 11:49:16 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass1_src54_1.ximg exists
[Tue Sep 27 11:49:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09485_pi14-548_cl_pass1_src54.csv
[Tue Sep 27 11:49:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09485_pi14-548_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09485_pi14-548_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:49:18 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass1_tfrozen_src54.ximg exists
[Tue Sep 27 11:49:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09485_pi14-548_cl_pass1_tfrozen_src54.csv
[Tue Sep 27 11:49:18 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Sep 27 11:49:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09485_pi14-548_cl_pass1_tfrozen_src54.csv
[Tue Sep 27 11:49:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09485_pi14-548_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09485_pi14-548_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:50:04 2011] Spatial fit model total counts = 18.813600, observed total counts = 21.000000
[Tue Sep 27 11:50:04 2011] Offset between fit and detection position for source 40 = 0.045482 pixels
[Tue Sep 27 11:50:04 2011] 19.372230 total counts/ 4.657830 bgd. counts: snr = 6.817902
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.045482 pixels
  Position = (178.0, 928.4) = 10 46 56.52 -60 6 2.9
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 14.7 +/- 4.4
  Background counts = 4.7
  Rate = 0.0003 +/- 8e-05
[Tue Sep 27 11:50:04 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 11:50:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 11:50:04 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 11:50:04 2011] Source does appear to be extended
[Tue Sep 27 11:50:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 12:57:33 2011] Writing source region out to fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src40_src.reg
[Tue Sep 27 12:57:33 2011] Extracting stamp from image fullrun_ccd2_acisf09485_pi14-548_cl_sm2.00.img.gz, (157, 907) - (199, 949)
[Tue Sep 27 12:57:33 2011] Writing fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src40.gif
[Tue Sep 27 13:31:53 2011] Size of ../../acisf09485/products/events/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src40_src.evt.gz[events] = 15 counts
[Tue Sep 27 13:31:53 2011] Mean chipx,y = (111.67, 863.20)
[Tue Sep 27 13:31:53 2011] Mean tdetx,y = (3924.20, 3974.33)
[Tue Sep 27 13:31:53 2011] chipx,y range = (93.00-125.00, 849.00-884.00)
[Tue Sep 27 13:31:53 2011] Size of ../../acisf09485/products/events/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 16 counts
[Tue Sep 27 13:31:55 2011] Not generating rmf since there are only 14 counts
[Tue Sep 27 13:31:55 2011] arf not found, will run specextract
[Tue Sep 27 13:32:24 2011] ../../acisf09485/products/spectra/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src40.warf not found
[Tue Sep 27 13:32:24 2011] ../../acisf09485/products/spectra/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src40.wrmf not found
[Tue Sep 27 13:32:24 2011] Removal of ../../acisf09485/products/spectra/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src40.soff failed
[Tue Sep 27 13:58:23 2011] Spectrum 40 has only 15 counts, deleting rmf
[Tue Sep 27 13:58:23 2011] 200.612
[Tue Sep 27 14:57:54 2011] Updating aperture counts using extracted products
[Tue Sep 27 14:57:54 2011] Error reading totcts from fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src40_src.pi.gz
[Tue Sep 27 14:57:55 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 14:57:55 2011] Using photon index=1.80, rate=0.000256, arf fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src40.arf
[Tue Sep 27 14:57:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 14:57:55 2011] Updating source flux to 4e-15
[Tue Sep 27 14:58:24 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting