[Tue Sep 27 11:44:53 2011] Detection parameters:
  Position = (899.6, 639.8) = 10 46 8.93 -60 8 23.9
  Extent = 2.6" x 1.4", rotation angle = 37 degrees
  Source counts = 200.2 +/- 15.1
  Background counts = 27.8
  Rate = 0.003 +/- 0.0003

[Tue Sep 27 11:45:02 2011] Off-axis axis estimate = 7.84'
[Tue Sep 27 11:47:13 2011] Using EEF radius (= 2.72 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:47:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 11:47:13 2011] Initial guess for spatial extent in simple fitting = 2.72"
[Tue Sep 27 11:47:13 2011] source mask rpix=5.5, npix_max = 145, mask sum = 144, frac = 0.992
[Tue Sep 27 11:47:13 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.72"
[Tue Sep 27 11:47:15 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass0_src2.ximg exists
[Tue Sep 27 11:47:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09485_pi14-548_cl_pass0_src2.csv
[Tue Sep 27 11:47:15 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Sep 27 11:47:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09485_pi14-548_cl_pass0_src2.csv
[Tue Sep 27 11:47:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09485_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09485_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:47:16 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Sep 27 11:47:16 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Sep 27 11:47:16 2011] Fit fullrun_ccd2_acisf09485_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Sep 27 11:48:02 2011] Spatial fit model total counts = 273.965000, observed total counts = 247.000000
[Tue Sep 27 11:48:02 2011] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep 27 11:48:02 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 11:48:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 11:48:02 2011] Assessing source extent using major
[Tue Sep 27 11:48:02 2011] Source does appear to be extended
[Tue Sep 27 11:48:02 2011] Computing asymmetry using major and minor axis, asym = 1.80
[Tue Sep 27 11:48:02 2011] Source is asymmetric
[Tue Sep 27 11:49:13 2011] Using EEF radius (= 2.72 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:49:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 11:49:13 2011] Initial guess for spatial extent in simple fitting = 2.72"
[Tue Sep 27 11:49:13 2011] source mask rpix=5.5, npix_max = 145, mask sum = 144, frac = 0.992
[Tue Sep 27 11:49:13 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.72"
[Tue Sep 27 11:49:15 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass1_src2.ximg exists
[Tue Sep 27 11:49:15 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Sep 27 11:49:15 2011] Fit fullrun_ccd2_acisf09485_pi14-548_cl_pass1_src2 appears to have run properly
[Tue Sep 27 11:49:16 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Sep 27 11:49:16 2011] fullrun_ccd2_acisf09485_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Sep 27 11:49:16 2011] Fit fullrun_ccd2_acisf09485_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Sep 27 11:50:03 2011] Spatial fit model total counts = 246.833000, observed total counts = 247.000000
[Tue Sep 27 11:50:03 2011] Offset between fit and detection position for source 1 = 1.220785 pixels
[Tue Sep 27 11:50:03 2011] 247.188800 total counts/ 69.904800 bgd. counts: snr = 21.203914
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.220785 pixels
  Position = (900.3, 640.8) = 10 46 8.91 -60 8 23.6
  Extent = 2.2 (1.9-2.6)", rotation angle = 0
  Source counts = 177.3 +/- 15.7
  Background counts = 69.9
  Rate = 0.003 +/- 0.0003
[Tue Sep 27 11:50:04 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 11:50:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 11:50:04 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 11:50:04 2011] Source does appear to be extended
[Tue Sep 27 11:50:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 12:57:31 2011] Writing source region out to fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 12:57:31 2011] Extracting stamp from image fullrun_ccd2_acisf09485_pi14-548_cl_sm2.00.img.gz, (798, 538) - (1003, 743)
[Tue Sep 27 12:57:31 2011] Writing fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 12:58:13 2011] Size of ../../acisf09485/products/events/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src1_src.evt.gz[events] = 242 counts
[Tue Sep 27 12:58:13 2011] Mean chipx,y = (467.28, 174.81)
[Tue Sep 27 12:58:13 2011] Mean tdetx,y = (3235.81, 3618.72)
[Tue Sep 27 12:58:13 2011] chipx,y range = (439.00-496.00, 143.00-203.00)
[Tue Sep 27 12:58:13 2011] Size of ../../acisf09485/products/events/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 289 counts
[Tue Sep 27 12:58:14 2011] rmf not found, will run specextract
[Tue Sep 27 12:58:14 2011] arf not found, will run specextract
[Tue Sep 27 12:58:32 2011] ../../acisf09485/products/spectra/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src1.warf not found
[Tue Sep 27 12:58:32 2011] ../../acisf09485/products/spectra/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src1.wrmf not found
[Tue Sep 27 12:58:32 2011] Removal of ../../acisf09485/products/spectra/fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src1.soff failed
[Tue Sep 27 13:58:22 2011] Keeping rmf generated by specextract
[Tue Sep 27 13:58:22 2011] 166.814
[Tue Sep 27 14:57:53 2011] Updating aperture counts using extracted products
[Tue Sep 27 14:57:53 2011] Error reading totcts from fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 14:57:54 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 14:57:54 2011] Using photon index=1.80, rate=0.00309, arf fullrun_ccd2_acisf09485_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 14:57:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 14:57:54 2011] Updating source flux to 5.6e-14
[Tue Sep 27 14:58:24 2011] Flag p found in src. 1 procflags, skipping spectral fitting