[Tue Sep 27 11:44:45 2011] Detection parameters: Position = (909.6, 719.3) = 10 46 15.82 -59 59 17.7 Extent = 1.6" x 1.4", rotation angle = 135 degrees Source counts = 41.4 +/- 8.9 Background counts = 38.6 Rate = 0.0007 +/- 0.0002 [Tue Sep 27 11:44:48 2011] Off-axis axis estimate = 9.35' [Tue Sep 27 11:47:06 2011] Using EEF radius (= 3.87 ")to estimate initial spatial extent for simple fitting [Tue Sep 27 11:47:06 2011] Initial guess for spatial extent in simple fitting = 3.87" [Tue Sep 27 11:47:06 2011] source mask rpix=7.9, npix_max = 279, mask sum = 289, frac = 1.033 [Tue Sep 27 11:47:06 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 3.87" [Tue Sep 27 11:47:08 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src56.ximg exists [Tue Sep 27 11:47:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src56.csv [Tue Sep 27 11:47:08 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src56_1.ximg exists [Tue Sep 27 11:47:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src56.csv [Tue Sep 27 11:47:08 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src56_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 27 11:47:11 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass0_tfrozen_src56.ximg exists [Tue Sep 27 11:47:11 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass0_tfrozen_src56_1.ximg exists [Tue Sep 27 11:47:11 2011] Fit fullrun_ccd0_acisf09485_pi14-548_cl_pass0_tfrozen_src56 appears to have run properly [Tue Sep 27 11:47:45 2011] Spatial fit model total counts = 118.981000, observed total counts = 119.000000 [Tue Sep 27 11:47:45 2011] Offset between fit and detection position for source 64 = 0.929320 pixels [Tue Sep 27 11:47:45 2011] 117.796900 total counts/ 101.272000 bgd. counts: snr = 1.642079 Spatial fit parameters: Offset between fit and detection position for source 64 = 0.929320 pixels Position = (910.4, 718.8) = 10 46 15.81 -59 59 18.2 Extent = 1.2 (1.0-2.4)", rotation angle = 0 Source counts = 16.5 +/- 10.9 Background counts = 101.3 Rate = 0.0003 +/- 0.0002 Deleting source due to low Poisson probability