[Tue Sep 27 11:44:45 2011] Detection parameters:
  Position = (217.4, 585.1) = 10 47 1.21 -60 0 24.3
  Extent = 1.5" x 0.8", rotation angle = 87 degrees
  Source counts = 17.2 +/- 4.7
  Background counts = 4.8
  Rate = 0.0003 +/- 8e-05

[Tue Sep 27 11:44:48 2011] Off-axis axis estimate = 5.60'
[Tue Sep 27 11:47:06 2011] Using EEF radius (= 1.44 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:47:06 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Tue Sep 27 11:47:06 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.047
[Tue Sep 27 11:47:06 2011] Giving source the simple spatial ID 54 for pass 0, mean size = 1.44"
[Tue Sep 27 11:47:08 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src54.ximg exists
[Tue Sep 27 11:47:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src54.csv
[Tue Sep 27 11:47:08 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src54_1.ximg exists
[Tue Sep 27 11:47:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src54.csv
[Tue Sep 27 11:47:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09485_pi14-548_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:47:11 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass0_tfrozen_src54.ximg exists
[Tue Sep 27 11:47:11 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass0_tfrozen_src54_1.ximg exists
[Tue Sep 27 11:47:11 2011] Fit fullrun_ccd0_acisf09485_pi14-548_cl_pass0_tfrozen_src54 appears to have run properly
[Tue Sep 27 11:47:45 2011] Spatial fit model total counts = 24.167500, observed total counts = 25.000000
[Tue Sep 27 11:47:45 2011] Offset between fit and detection position for source 62 = 2.313174 pixels
[Tue Sep 27 11:47:45 2011] 22.577735 total counts/ 0.436835 bgd. counts: snr = 33.499364
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 2.313174 pixels
  Position = (217.9, 587.4) = 10 47 1.21 -60 0 23.5
  Extent = 1.6 (0.9-2.3)", rotation angle = 0
  Source counts = 22.1 +/- 4.8
  Background counts = 0.4
  Rate = 0.0004 +/- 8e-05
[Tue Sep 27 11:47:45 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 11:47:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 11:47:45 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 11:47:45 2011] Source does appear to be extended
[Tue Sep 27 11:47:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 11:48:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:48:54 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Tue Sep 27 11:48:54 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.034
[Tue Sep 27 11:48:54 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 1.56"
[Tue Sep 27 11:48:57 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass1_src53.ximg exists
[Tue Sep 27 11:48:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09485_pi14-548_cl_pass1_src53.csv
[Tue Sep 27 11:48:57 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass1_src53_1.ximg exists
[Tue Sep 27 11:48:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09485_pi14-548_cl_pass1_src53.csv
[Tue Sep 27 11:48:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09485_pi14-548_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09485_pi14-548_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:48:58 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass1_tfrozen_src53.ximg exists
[Tue Sep 27 11:48:58 2011] fullrun_ccd0_acisf09485_pi14-548_cl_pass1_tfrozen_src53_1.ximg exists
[Tue Sep 27 11:48:58 2011] Fit fullrun_ccd0_acisf09485_pi14-548_cl_pass1_tfrozen_src53 appears to have run properly
[Tue Sep 27 11:49:44 2011] Warning, spatial fit 53 centroid is now closest to src. 50
[Tue Sep 27 11:49:44 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 11:49:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 11:49:44 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 11:49:44 2011] Source does appear to be extended
[Tue Sep 27 11:49:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 11:51:14 2011] Not overwriting source region fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_src.reg
[Tue Sep 27 11:51:14 2011] Extracting stamp from image fullrun_ccd0_acisf09485_pi14-548_cl_sm2.00.img.gz, (146, 516) - (289, 659)
[Tue Sep 27 11:51:14 2011] Writing fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62.gif
[Tue Sep 27 12:25:01 2011] ../../acisf09485/products/events/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_src.evt and ../../acisf09485/products/events/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_bgd.evt exist, delete to re-create
[Tue Sep 27 12:25:01 2011] Size of ../../acisf09485/products/events/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_src.evt.gz[events] = 35 counts
[Tue Sep 27 12:25:01 2011] Mean chipx,y = (458.83, 867.46)
[Tue Sep 27 12:25:01 2011] Mean tdetx,y = (3928.46, 4673.17)
[Tue Sep 27 12:25:01 2011] chipx,y range = (435.00-482.00, 847.00-884.00)
[Tue Sep 27 12:25:01 2011] Size of ../../acisf09485/products/events/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_bgd.evt.gz[events] = 184 counts
[Tue Sep 27 12:25:01 2011] ../../acisf09485/products/images/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_src.img and ../../acisf09485/products/images/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_bgd.img exist, delete to re-create
[Tue Sep 27 12:25:01 2011] Not generating rmf since there are only 22 counts
[Tue Sep 27 12:25:01 2011] arf not found, will run specextract
[Tue Sep 27 12:25:28 2011] ../../acisf09485/products/spectra/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62.warf not found
[Tue Sep 27 12:25:28 2011] ../../acisf09485/products/spectra/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62.wrmf not found
[Tue Sep 27 12:25:28 2011] Removal of ../../acisf09485/products/spectra/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62.soff failed
[Tue Sep 27 12:25:38 2011] ../../acisf09485/products/lightcurves/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_src.lc and ../../acisf09485/products/lightcurves/fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_bgd.lc exist, delete to re-create
[Tue Sep 27 12:29:21 2011] Spectrum 62 has only 22 counts, deleting rmf
[Tue Sep 27 12:29:21 2011] 184.245
[Tue Sep 27 14:57:51 2011] Updating aperture counts using extracted products
[Tue Sep 27 14:57:51 2011] Error reading totcts from fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62_src.pi.gz
[Tue Sep 27 14:57:52 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 14:57:52 2011] Using photon index=1.80, rate=0.000386, arf fullrun_ccd0_acisf09485_pi14-548_pass1_cl_src62.arf
[Tue Sep 27 14:57:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 14:57:52 2011] Updating source flux to 6.5e-15
[Tue Sep 27 14:58:09 2011] Source 62 has fewer than 100.000000 counts, skipping spectral fitting