[Sat Sep 24 18:52:51 2011] Detection parameters:
  Position = (1057.9, 914.2) = 10 44 50.70 -59 21 50.5
  Extent = 0.5" x 0.5", rotation angle = 125 degrees
  Source counts = 18.0 +/- 4.5
  Background counts = 2.0
  Rate = 0.0003 +/- 8e-05

[Sat Sep 24 18:52:58 2011] Off-axis axis estimate = 1.30'
[Sat Sep 24 18:55:53 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 18:55:53 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Sep 24 18:55:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.609
[Sat Sep 24 18:55:53 2011] Giving source the simple spatial ID 75 for pass 0, mean size = 0.38"
[Sat Sep 24 18:55:56 2011] fullrun_ccd3_acisf09484_pi14-548_cl_pass0_src75.ximg exists
[Sat Sep 24 18:55:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09484_pi14-548_cl_pass0_src75.csv
[Sat Sep 24 18:55:56 2011] fullrun_ccd3_acisf09484_pi14-548_cl_pass0_src75_1.ximg exists
[Sat Sep 24 18:55:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09484_pi14-548_cl_pass0_src75.csv
[Sat Sep 24 18:55:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09484_pi14-548_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09484_pi14-548_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:56:01 2011] fullrun_ccd3_acisf09484_pi14-548_cl_pass0_tfrozen_src75.ximg exists
[Sat Sep 24 18:56:01 2011] fullrun_ccd3_acisf09484_pi14-548_cl_pass0_tfrozen_src75_1.ximg exists
[Sat Sep 24 18:56:01 2011] Fit fullrun_ccd3_acisf09484_pi14-548_cl_pass0_tfrozen_src75 appears to have run properly
[Sat Sep 24 18:57:04 2011] Spatial fit model total counts = 31.858700, observed total counts = 32.000000
[Sat Sep 24 18:57:04 2011] Offset between fit and detection position for source 130 = 0.681749 pixels
[Sat Sep 24 18:57:04 2011] 32.850300 total counts/ 14.794200 bgd. counts: snr = 4.694380
Spatial fit parameters:
  Offset between fit and detection position for source 130 = 0.681749 pixels
  Position = (1058.4, 914.6) = 10 44 50.70 -59 21 50.5
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 18.1 +/- 5.7
  Background counts = 14.8
  Rate = 0.0003 +/- 0.0001
[Sat Sep 24 18:57:05 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:57:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:57:05 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:57:05 2011] Source does appear to be extended
[Sat Sep 24 18:57:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 18:58:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 18:58:25 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sat Sep 24 18:58:25 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.098
[Sat Sep 24 18:58:25 2011] Giving source the simple spatial ID 75 for pass 1, mean size = 0.46"
[Sat Sep 24 18:58:28 2011] fullrun_ccd3_acisf09484_pi14-548_cl_pass1_src75.ximg exists
[Sat Sep 24 18:58:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09484_pi14-548_cl_pass1_src75.csv
[Sat Sep 24 18:58:28 2011] fullrun_ccd3_acisf09484_pi14-548_cl_pass1_src75_1.ximg exists
[Sat Sep 24 18:58:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09484_pi14-548_cl_pass1_src75.csv
[Sat Sep 24 18:58:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09484_pi14-548_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09484_pi14-548_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:58:32 2011] fullrun_ccd3_acisf09484_pi14-548_cl_pass1_tfrozen_src75.ximg exists
[Sat Sep 24 18:58:32 2011] fullrun_ccd3_acisf09484_pi14-548_cl_pass1_tfrozen_src75_1.ximg exists
[Sat Sep 24 18:58:32 2011] Fit fullrun_ccd3_acisf09484_pi14-548_cl_pass1_tfrozen_src75 appears to have run properly
[Sat Sep 24 18:59:37 2011] Spatial fit model total counts = 31.663400, observed total counts = 32.000000
[Sat Sep 24 18:59:37 2011] Offset between fit and detection position for source 130 = 0.007585 pixels
[Sat Sep 24 18:59:37 2011] 32.638200 total counts/ 14.556100 bgd. counts: snr = 4.739433
Spatial fit parameters:
  Offset between fit and detection position for source 130 = 0.007585 pixels
  Position = (1058.4, 914.6) = 10 44 50.70 -59 21 50.5
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 18.1 +/- 5.7
  Background counts = 14.6
  Rate = 0.0003 +/- 0.0001
[Sat Sep 24 18:59:37 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:59:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:59:37 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:59:37 2011] Source does appear to be extended
[Sat Sep 24 18:59:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 19:21:41 2011] Not overwriting source region fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_src.reg
[Sat Sep 24 19:21:41 2011] Extracting stamp from image fullrun_ccd3_acisf09484_pi14-548_cl_sm2.00.img.gz, (1037, 894) - (1079, 936)
[Sat Sep 24 19:21:41 2011] Writing fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130.gif
[Sat Sep 24 19:26:09 2011] ../../acisf09484/products/events/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_src.evt and ../../acisf09484/products/events/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_bgd.evt exist, delete to re-create
[Sat Sep 24 19:26:09 2011] Size of ../../acisf09484/products/events/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_src.evt.gz[events] = 20 counts
[Sat Sep 24 19:26:09 2011] Mean chipx,y = (888.05, 874.85)
[Sat Sep 24 19:26:09 2011] Mean tdetx,y = (4257.15, 3949.05)
[Sat Sep 24 19:26:09 2011] chipx,y range = (876.00-907.00, 860.00-893.00)
[Sat Sep 24 19:26:09 2011] Size of ../../acisf09484/products/events/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_bgd.evt.gz[events] = 10 counts
[Sat Sep 24 19:26:09 2011] ../../acisf09484/products/images/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_src.img and ../../acisf09484/products/images/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_bgd.img exist, delete to re-create
[Sat Sep 24 19:26:09 2011] ../../acisf09484/products/spectra/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_src.pi and ../../acisf09484/products/spectra/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_bgd.pi exist, delete to re-create
[Sat Sep 24 19:26:09 2011] Not generating rmf since there are only 18 counts
[Sat Sep 24 19:26:12 2011] ../../acisf09484/products/lightcurves/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_src.lc and ../../acisf09484/products/lightcurves/fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_bgd.lc exist, delete to re-create
[Sat Sep 24 19:33:23 2011] 201.504
[Sat Sep 24 19:34:39 2011] Updating aperture counts using extracted products
[Sat Sep 24 19:34:39 2011] Error reading totcts from fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130_src.pi.gz
[Sat Sep 24 19:34:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 19:34:42 2011] Using photon index=1.80, rate=0.000327, arf fullrun_ccd3_acisf09484_pi14-548_pass1_cl_src130.arf
[Sat Sep 24 19:34:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 19:34:42 2011] Updating source flux to 5e-15
[Sat Sep 24 19:35:27 2011] Source 130 has fewer than 100.000000 counts, skipping spectral fitting