[Wed Oct  5 22:05:43 2011] Detection parameters:
  Position = (631.5, 684.9) = 10 43 27.80 -60 3 36.7
  Extent = 0.9" x 0.6", rotation angle = 170 degrees
  Source counts = 28.6 +/- 5.7
  Background counts = 3.4
  Rate = 0.0005 +/- 0.0001

[Wed Oct  5 22:05:51 2011] Off-axis axis estimate = 5.26'
[Wed Oct  5 22:08:34 2011] Using EEF radius (= 1.29 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:08:34 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Wed Oct  5 22:08:34 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.080
[Wed Oct  5 22:08:34 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 1.29"
[Wed Oct  5 22:08:36 2011] fullrun_ccd2_acisf09482_pi14-548_cl_pass0_src32.ximg exists
[Wed Oct  5 22:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09482_pi14-548_cl_pass0_src32.csv
[Wed Oct  5 22:08:36 2011] fullrun_ccd2_acisf09482_pi14-548_cl_pass0_src32_1.ximg exists
[Wed Oct  5 22:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09482_pi14-548_cl_pass0_src32.csv
[Wed Oct  5 22:08:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09482_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09482_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:08:38 2011] fullrun_ccd2_acisf09482_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Wed Oct  5 22:08:38 2011] fullrun_ccd2_acisf09482_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Oct  5 22:08:38 2011] Fit fullrun_ccd2_acisf09482_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Wed Oct  5 22:09:33 2011] Spatial fit model total counts = 39.643100, observed total counts = 39.000000
[Wed Oct  5 22:09:33 2011] Offset between fit and detection position for source 11 = 0.565120 pixels
[Wed Oct  5 22:09:33 2011] 39.480200 total counts/ 15.330600 bgd. counts: snr = 6.167801
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.565120 pixels
  Position = (631.6, 685.4) = 10 43 27.83 -60 3 36.7
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 24.1 +/- 6.3
  Background counts = 15.3
  Rate = 0.0004 +/- 0.0001
[Wed Oct  5 22:09:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 22:09:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 22:09:34 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 22:09:34 2011] Source does appear to be extended
[Wed Oct  5 22:09:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:10:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:10:47 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Wed Oct  5 22:10:47 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.005
[Wed Oct  5 22:10:47 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 0.74"
[Wed Oct  5 22:10:53 2011] fullrun_ccd2_acisf09482_pi14-548_cl_pass1_src32.ximg exists
[Wed Oct  5 22:10:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09482_pi14-548_cl_pass1_src32.csv
[Wed Oct  5 22:10:53 2011] fullrun_ccd2_acisf09482_pi14-548_cl_pass1_src32_1.ximg exists
[Wed Oct  5 22:10:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09482_pi14-548_cl_pass1_src32.csv
[Wed Oct  5 22:10:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09482_pi14-548_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09482_pi14-548_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:10:55 2011] fullrun_ccd2_acisf09482_pi14-548_cl_pass1_tfrozen_src32.ximg exists
[Wed Oct  5 22:10:55 2011] fullrun_ccd2_acisf09482_pi14-548_cl_pass1_tfrozen_src32_1.ximg exists
[Wed Oct  5 22:10:55 2011] Fit fullrun_ccd2_acisf09482_pi14-548_cl_pass1_tfrozen_src32 appears to have run properly
[Wed Oct  5 22:11:45 2011] Spatial fit model total counts = 39.667700, observed total counts = 39.000000
[Wed Oct  5 22:11:45 2011] Offset between fit and detection position for source 11 = 0.050650 pixels
[Wed Oct  5 22:11:45 2011] 39.079700 total counts/ 14.753500 bgd. counts: snr = 6.333252
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.050650 pixels
  Position = (631.6, 685.5) = 10 43 27.83 -60 3 36.7
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 24.3 +/- 6.3
  Background counts = 14.8
  Rate = 0.0004 +/- 0.0001
[Wed Oct  5 22:11:45 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 22:11:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 22:11:45 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 22:11:45 2011] Source does appear to be extended
[Wed Oct  5 22:11:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:25:02 2011] Not overwriting source region fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_src.reg
[Wed Oct  5 22:25:02 2011] Extracting stamp from image fullrun_ccd2_acisf09482_pi14-548_cl_sm2.00.img.gz, (597, 651) - (666, 720)
[Wed Oct  5 22:25:02 2011] Writing fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11.gif
[Wed Oct  5 22:26:45 2011] ../../acisf09482/products/events/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_src.evt and ../../acisf09482/products/events/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Wed Oct  5 22:26:45 2011] Size of ../../acisf09482/products/events/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_src.evt.gz[events] = 31 counts
[Wed Oct  5 22:26:45 2011] Mean chipx,y = (445.74, 526.58)
[Wed Oct  5 22:26:45 2011] Mean tdetx,y = (3587.58, 3640.26)
[Wed Oct  5 22:26:45 2011] chipx,y range = (425.00-463.00, 505.00-544.00)
[Wed Oct  5 22:26:45 2011] Size of ../../acisf09482/products/events/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 45 counts
[Wed Oct  5 22:26:45 2011] ../../acisf09482/products/images/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_src.img and ../../acisf09482/products/images/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Wed Oct  5 22:26:45 2011] ../../acisf09482/products/spectra/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_src.pi and ../../acisf09482/products/spectra/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Wed Oct  5 22:26:45 2011] Not generating rmf since there are only 24 counts
[Wed Oct  5 22:26:51 2011] ../../acisf09482/products/lightcurves/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_src.lc and ../../acisf09482/products/lightcurves/fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Wed Oct  5 22:30:33 2011] 176.993
[Wed Oct  5 23:00:57 2011] Updating aperture counts using extracted products
[Wed Oct  5 23:00:57 2011] Error reading totcts from fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Oct  5 23:00:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 23:00:58 2011] Using photon index=1.80, rate=0.00043, arf fullrun_ccd2_acisf09482_pi14-548_pass1_cl_src11.arf
[Wed Oct  5 23:00:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 23:00:58 2011] Updating source flux to 7.5e-15
[Wed Oct  5 23:02:08 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting