[Fri Oct 14 23:11:36 2011] Detection parameters:
  Position = (1016.3, 1075.1) = 14 20 34.04 53 3 27.1
  Extent = 0.7" x 0.6", rotation angle = 68 degrees
  Source counts = 16.5 +/- 4.2
  Background counts = 1.5
  Rate = 0.0004 +/- 9e-05

[Fri Oct 14 23:11:37 2011] Off-axis axis estimate = 4.78'
[Fri Oct 14 23:13:11 2011] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:13:11 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Fri Oct 14 23:13:11 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.012
[Fri Oct 14 23:13:11 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.09"
[Fri Oct 14 23:13:20 2011] fullrun_ccd3_acisf09453_pi14-548_cl_pass0_src11.ximg exists
[Fri Oct 14 23:13:20 2011] fullrun_ccd3_acisf09453_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Oct 14 23:13:20 2011] Fit fullrun_ccd3_acisf09453_pi14-548_cl_pass0_src11 appears to have run properly
[Fri Oct 14 23:13:21 2011] fullrun_ccd3_acisf09453_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct 14 23:13:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09453_pi14-548_cl_pass0_tfrozen_src11.csv
[Fri Oct 14 23:13:21 2011] fullrun_ccd3_acisf09453_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct 14 23:13:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09453_pi14-548_cl_pass0_tfrozen_src11.csv
[Fri Oct 14 23:13:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09453_pi14-548_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09453_pi14-548_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:13:38 2011] Spatial fit model total counts = 22.095200, observed total counts = 24.000000
[Fri Oct 14 23:13:38 2011] Offset between fit and detection position for source 20 = 0.094036 pixels
[Fri Oct 14 23:13:38 2011] 23.010300 total counts/ 11.417500 bgd. counts: snr = 3.430859
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.094036 pixels
  Position = (1016.3, 1075.1) = 14 20 34.07 53 3 26.9
  Extent = 0.8" x 0.3", rotation angle = 283
  Source counts = 11.6 +/- 4.8
  Background counts = 11.4
  Rate = 0.0003 +/- 0.0001
[Fri Oct 14 23:13:38 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:13:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:13:38 2011] Assessing source extent using major
[Fri Oct 14 23:13:38 2011] Source does appear to be extended
[Fri Oct 14 23:13:38 2011] Computing asymmetry using major and minor axis, asym = 2.91
[Fri Oct 14 23:13:38 2011] Source is asymmetric
[Fri Oct 14 23:14:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:14:15 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Fri Oct 14 23:14:15 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.894
[Fri Oct 14 23:14:15 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.53"
[Fri Oct 14 23:14:16 2011] fullrun_ccd3_acisf09453_pi14-548_cl_pass1_src11.ximg exists
[Fri Oct 14 23:14:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09453_pi14-548_cl_pass1_src11.csv
[Fri Oct 14 23:14:16 2011] fullrun_ccd3_acisf09453_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Oct 14 23:14:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09453_pi14-548_cl_pass1_src11.csv
[Fri Oct 14 23:14:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09453_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09453_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:14:25 2011] fullrun_ccd3_acisf09453_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Oct 14 23:14:25 2011] fullrun_ccd3_acisf09453_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Oct 14 23:14:25 2011] Fit fullrun_ccd3_acisf09453_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Oct 14 23:14:47 2011] Spatial fit model total counts = 22.840200, observed total counts = 24.000000
[Fri Oct 14 23:14:47 2011] Offset between fit and detection position for source 20 = 0.178289 pixels
[Fri Oct 14 23:14:47 2011] 24.259700 total counts/ 11.316700 bgd. counts: snr = 3.847468
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.178289 pixels
  Position = (1016.2, 1075.0) = 14 20 34.07 53 3 26.8
  Extent = 0.5 (0.4-1.0)", rotation angle = 0
  Source counts = 12.9 +/- 4.9
  Background counts = 11.3
  Rate = 0.0003 +/- 0.0001
[Fri Oct 14 23:14:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:14:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:14:47 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:14:47 2011] Source does appear to be extended
[Fri Oct 14 23:14:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:21:06 2011] Not overwriting source region fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_src.reg
[Fri Oct 14 23:21:06 2011] Extracting stamp from image fullrun_ccd3_acisf09453_pi14-548_cl_sm2.00.img.gz, (991, 1050) - (1041, 1100)
[Fri Oct 14 23:21:06 2011] Writing fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20.gif
[Fri Oct 14 23:21:50 2011] ../../acisf09453/products/events/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_src.evt and ../../acisf09453/products/events/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Fri Oct 14 23:21:50 2011] Size of ../../acisf09453/products/events/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_src.evt.gz[events] = 16 counts
[Fri Oct 14 23:21:50 2011] Mean chipx,y = (980.88, 435.31)
[Fri Oct 14 23:21:50 2011] Mean tdetx,y = (4696.69, 4041.88)
[Fri Oct 14 23:21:50 2011] chipx,y range = (958.00-994.00, 422.00-454.00)
[Fri Oct 14 23:21:50 2011] Size of ../../acisf09453/products/events/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 11 counts
[Fri Oct 14 23:21:50 2011] ../../acisf09453/products/images/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_src.img and ../../acisf09453/products/images/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Fri Oct 14 23:21:50 2011] ../../acisf09453/products/spectra/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_src.pi and ../../acisf09453/products/spectra/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Fri Oct 14 23:21:50 2011] Not generating rmf since there are only 12 counts
[Fri Oct 14 23:21:53 2011] ../../acisf09453/products/lightcurves/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_src.lc and ../../acisf09453/products/lightcurves/fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Fri Oct 14 23:22:40 2011] 191.686
[Fri Oct 14 23:22:51 2011] Updating aperture counts using extracted products
[Fri Oct 14 23:22:51 2011] Error reading totcts from fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20_src.pi.gz
[Fri Oct 14 23:22:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:22:51 2011] Using photon index=1.80, rate=0.00029, arf fullrun_ccd3_acisf09453_pi14-548_pass1_cl_src20.arf
[Fri Oct 14 23:22:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:22:51 2011] Updating source flux to 3.6e-15
[Fri Oct 14 23:23:16 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting