[Fri Oct 14 23:11:29 2011] Detection parameters:
  Position = (360.6, 942.4) = 14 20 32.87 52 55 56.6
  Extent = 0.8" x 0.6", rotation angle = 92 degrees
  Source counts = 18.3 +/- 4.5
  Background counts = 1.7
  Rate = 0.0004 +/- 0.0001

[Fri Oct 14 23:11:34 2011] Off-axis axis estimate = 4.71'
[Fri Oct 14 23:13:08 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:13:08 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Fri Oct 14 23:13:08 2011] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.840
[Fri Oct 14 23:13:08 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.07"
[Fri Oct 14 23:13:10 2011] fullrun_ccd2_acisf09453_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct 14 23:13:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09453_pi14-548_cl_pass0_src10.csv
[Fri Oct 14 23:13:10 2011] fullrun_ccd2_acisf09453_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct 14 23:13:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09453_pi14-548_cl_pass0_src10.csv
[Fri Oct 14 23:13:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09453_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09453_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:13:11 2011] fullrun_ccd2_acisf09453_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct 14 23:13:11 2011] fullrun_ccd2_acisf09453_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct 14 23:13:11 2011] Fit fullrun_ccd2_acisf09453_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct 14 23:13:35 2011] Spatial fit model total counts = 26.629500, observed total counts = 24.000000
[Fri Oct 14 23:13:35 2011] Offset between fit and detection position for source 1 = 1.263084 pixels
[Fri Oct 14 23:13:35 2011] 26.953270 total counts/ 9.359870 bgd. counts: snr = 5.750623
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.263084 pixels
  Position = (361.0, 943.6) = 14 20 32.88 52 55 56.9
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 17.6 +/- 5.2
  Background counts = 9.4
  Rate = 0.0004 +/- 0.0001
[Fri Oct 14 23:13:35 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:13:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:13:35 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:13:35 2011] Source does appear to be extended
[Fri Oct 14 23:13:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:14:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:14:12 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Oct 14 23:14:12 2011] source mask rpix=1.2, npix_max = 11, mask sum = 11, frac = 0.940
[Fri Oct 14 23:14:12 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.60"
[Fri Oct 14 23:14:14 2011] fullrun_ccd2_acisf09453_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct 14 23:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09453_pi14-548_cl_pass1_src10.csv
[Fri Oct 14 23:14:15 2011] fullrun_ccd2_acisf09453_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct 14 23:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09453_pi14-548_cl_pass1_src10.csv
[Fri Oct 14 23:14:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09453_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09453_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:14:15 2011] fullrun_ccd2_acisf09453_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct 14 23:14:15 2011] fullrun_ccd2_acisf09453_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct 14 23:14:15 2011] Fit fullrun_ccd2_acisf09453_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct 14 23:14:44 2011] Spatial fit model total counts = 26.624100, observed total counts = 24.000000
[Fri Oct 14 23:14:44 2011] Offset between fit and detection position for source 1 = 0.039389 pixels
[Fri Oct 14 23:14:44 2011] 26.197510 total counts/ 8.315310 bgd. counts: snr = 6.201285
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.039389 pixels
  Position = (361.0, 943.6) = 14 20 32.88 52 55 56.9
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 17.9 +/- 5.1
  Background counts = 8.3
  Rate = 0.0004 +/- 0.0001
[Fri Oct 14 23:14:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:14:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:14:44 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:14:44 2011] Source does appear to be extended
[Fri Oct 14 23:14:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:18:44 2011] Not overwriting source region fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 14 23:18:44 2011] Extracting stamp from image fullrun_ccd2_acisf09453_pi14-548_cl_sm2.00.img.gz, (333, 916) - (389, 972)
[Fri Oct 14 23:18:44 2011] Writing fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1.gif
[Fri Oct 14 23:19:21 2011] ../../acisf09453/products/events/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_src.evt and ../../acisf09453/products/events/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 14 23:19:21 2011] Size of ../../acisf09453/products/events/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_src.evt.gz[events] = 17 counts
[Fri Oct 14 23:19:21 2011] Mean chipx,y = (628.24, 926.88)
[Fri Oct 14 23:19:21 2011] Mean tdetx,y = (3987.88, 3457.76)
[Fri Oct 14 23:19:21 2011] chipx,y range = (614.00-649.00, 913.00-941.00)
[Fri Oct 14 23:19:21 2011] Size of ../../acisf09453/products/events/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 15 counts
[Fri Oct 14 23:19:21 2011] ../../acisf09453/products/images/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_src.img and ../../acisf09453/products/images/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 14 23:19:21 2011] ../../acisf09453/products/spectra/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_src.pi and ../../acisf09453/products/spectra/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 14 23:19:21 2011] Not generating rmf since there are only 17 counts
[Fri Oct 14 23:19:25 2011] ../../acisf09453/products/lightcurves/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_src.lc and ../../acisf09453/products/lightcurves/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 14 23:21:05 2011] 177.976
[Fri Oct 14 23:22:50 2011] Updating aperture counts using extracted products
[Fri Oct 14 23:22:50 2011] Error reading totcts from fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 14 23:22:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:22:50 2011] Using photon index=1.80, rate=0.0004, arf fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1.arf
[Fri Oct 14 23:22:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:22:50 2011] Updating source flux to 5.3e-15
[Fri Oct 14 23:23:15 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 23:23:16 2011] acisf09453/analysis//spectral/fullrun_ccd2_acisf09453_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete