[Fri Oct 14 23:11:27 2011] Detection parameters:
  Position = (345.2, 577.2) = 14 20 27.50 53 4 54.3
  Extent = 0.9" x 0.6", rotation angle = 65 degrees
  Source counts = 462.1 +/- 21.7
  Background counts = 8.9
  Rate = 0.01 +/- 0.0005

[Fri Oct 14 23:11:29 2011] Off-axis axis estimate = 5.56'
[Fri Oct 14 23:13:00 2011] Using EEF radius (= 1.42 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:13:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 23:13:00 2011] Initial guess for spatial extent in simple fitting = 1.42"
[Fri Oct 14 23:13:00 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.071
[Fri Oct 14 23:13:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.42"
[Fri Oct 14 23:13:00 2011] fullrun_ccd1_acisf09453_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 23:13:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09453_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 23:13:01 2011] fullrun_ccd1_acisf09453_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 23:13:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09453_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 23:13:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09453_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09453_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:13:07 2011] fullrun_ccd1_acisf09453_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 23:13:07 2011] fullrun_ccd1_acisf09453_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 23:13:07 2011] Fit fullrun_ccd1_acisf09453_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 23:13:33 2011] Spatial fit model total counts = 476.751000, observed total counts = 477.000000
[Fri Oct 14 23:13:33 2011] Offset between fit and detection position for source 3 = 0.572180 pixels
[Fri Oct 14 23:13:33 2011] 478.762800 total counts/ 33.737800 bgd. counts: snr = 76.617156
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.572180 pixels
  Position = (345.6, 577.6) = 14 20 27.51 53 4 54.3
  Extent = 1.1 (1.1-1.2)", rotation angle = 0
  Source counts = 445.0 +/- 21.9
  Background counts = 33.7
  Rate = 0.01 +/- 0.0005
[Fri Oct 14 23:13:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:13:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:13:33 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:13:33 2011] Source does appear to be extended
[Fri Oct 14 23:13:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:14:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:14:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 23:14:09 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Fri Oct 14 23:14:09 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.789
[Fri Oct 14 23:14:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.14"
[Fri Oct 14 23:14:10 2011] fullrun_ccd1_acisf09453_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 23:14:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09453_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 23:14:10 2011] fullrun_ccd1_acisf09453_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 23:14:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09453_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 23:14:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09453_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09453_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:14:11 2011] fullrun_ccd1_acisf09453_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 23:14:11 2011] fullrun_ccd1_acisf09453_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 23:14:11 2011] Fit fullrun_ccd1_acisf09453_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 23:14:41 2011] Spatial fit model total counts = 471.636000, observed total counts = 472.000000
[Fri Oct 14 23:14:41 2011] Offset between fit and detection position for source 3 = 0.092447 pixels
[Fri Oct 14 23:14:41 2011] 474.446200 total counts/ 46.764200 bgd. counts: snr = 62.540913
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.092447 pixels
  Position = (345.6, 577.5) = 14 20 27.51 53 4 54.2
  Extent = 1.1 (1.0-1.2)", rotation angle = 0
  Source counts = 427.7 +/- 21.8
  Background counts = 46.8
  Rate = 0.01 +/- 0.0005
[Fri Oct 14 23:14:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:14:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:14:41 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:14:41 2011] Source does appear to be extended
[Fri Oct 14 23:14:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:17:10 2011] Not overwriting source region fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 14 23:17:10 2011] Extracting stamp from image fullrun_ccd1_acisf09453_pi14-548_cl_sm2.00.img.gz, (296, 528) - (396, 627)
[Fri Oct 14 23:17:10 2011] Writing fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3.gif
[Fri Oct 14 23:17:17 2011] ../../acisf09453/products/events/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_src.evt and ../../acisf09453/products/events/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 14 23:17:17 2011] Size of ../../acisf09453/products/events/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_src.evt.gz[events] = 466 counts
[Fri Oct 14 23:17:17 2011] Mean chipx,y = (137.56, 379.43)
[Fri Oct 14 23:17:17 2011] Mean tdetx,y = (4752.57, 4244.56)
[Fri Oct 14 23:17:17 2011] chipx,y range = (114.00-161.00, 358.00-402.00)
[Fri Oct 14 23:17:17 2011] Size of ../../acisf09453/products/events/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 59 counts
[Fri Oct 14 23:17:17 2011] ../../acisf09453/products/images/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_src.img and ../../acisf09453/products/images/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 14 23:17:17 2011] ../../acisf09453/products/spectra/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_src.pi and ../../acisf09453/products/spectra/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 14 23:17:20 2011] ../../acisf09453/products/lightcurves/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_src.lc and ../../acisf09453/products/lightcurves/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 14 23:18:42 2011] Keeping rmf generated by specextract
[Fri Oct 14 23:18:43 2011] 189.199
[Fri Oct 14 23:22:50 2011] Updating aperture counts using extracted products
[Fri Oct 14 23:22:50 2011] Error reading totcts from fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 14 23:22:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:22:50 2011] Using photon index=1.80, rate=0.00957, arf fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3.arf
[Fri Oct 14 23:22:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:22:50 2011] Updating source flux to 1.2e-13
[Fri Oct 14 23:23:15 2011] Reading fit data from acisf09453/analysis//spectral/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_pl.csv
[Fri Oct 14 23:23:15 2011] Spectral fit parameter nH value = 4.69511e+20
[Fri Oct 14 23:23:15 2011] Spectral fit parameter PhoIndex value = 1.73033
[Fri Oct 14 23:23:15 2011] Failed to get F(0.3-8.0) from acisf09453/analysis//spectral/fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 23:23:15 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:23:15 2011] Using Nh = 4.7e+20, photon index=1.73, rate=0.00957, arf fullrun_ccd1_acisf09453_pi14-548_pass1_cl_src3.arf
[Fri Oct 14 23:23:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:23:15 2011] Updating source flux to 1.2e-13