[Tue Oct  4 14:00:54 2011] Detection parameters:
  Position = (599.1, 693.8) = 14 19 46.36 52 59 43.0
  Extent = 0.5" x 0.5", rotation angle = 110 degrees
  Source counts = 146.6 +/- 12.2
  Background counts = 1.4
  Rate = 0.01 +/- 0.0009

[Tue Oct  4 14:00:55 2011] Off-axis axis estimate = 4.66'
[Tue Oct  4 14:01:31 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 14:01:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 14:01:31 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Tue Oct  4 14:01:31 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.080
[Tue Oct  4 14:01:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.05"
[Tue Oct  4 14:01:31 2011] fullrun_ccd3_acisf09452_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct  4 14:01:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09452_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 14:01:31 2011] fullrun_ccd3_acisf09452_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct  4 14:01:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09452_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 14:01:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09452_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09452_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 14:01:32 2011] fullrun_ccd3_acisf09452_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 14:01:32 2011] fullrun_ccd3_acisf09452_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 14:01:32 2011] Fit fullrun_ccd3_acisf09452_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 14:01:38 2011] Spatial fit model total counts = 136.034000, observed total counts = 148.000000
[Tue Oct  4 14:01:38 2011] Offset between fit and detection position for source 7 = 0.785582 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.785582 pixels
  Position = (599.5, 694.4) = 14 19 46.36 52 59 43.0
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 135.7 +/- 11.6
  Background counts = 0.0
  Rate = 0.01 +/- 0.0009
[Tue Oct  4 14:01:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 14:01:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 14:01:38 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 14:01:38 2011] Source does appear to be extended
[Tue Oct  4 14:01:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 14:01:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 14:01:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 14:01:58 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Tue Oct  4 14:01:58 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.607
[Tue Oct  4 14:01:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.70"
[Tue Oct  4 14:01:58 2011] fullrun_ccd3_acisf09452_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct  4 14:01:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09452_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 14:01:58 2011] fullrun_ccd3_acisf09452_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct  4 14:01:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09452_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 14:01:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09452_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09452_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 14:01:58 2011] fullrun_ccd3_acisf09452_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 14:01:58 2011] fullrun_ccd3_acisf09452_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 14:01:58 2011] Fit fullrun_ccd3_acisf09452_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 14:02:03 2011] Spatial fit model total counts = 137.361000, observed total counts = 147.000000
[Tue Oct  4 14:02:03 2011] Offset between fit and detection position for source 7 = 0.011213 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.011213 pixels
  Position = (599.5, 694.4) = 14 19 46.36 52 59 43.0
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 136.9 +/- 11.7
  Background counts = 0.0
  Rate = 0.01 +/- 0.0009
[Tue Oct  4 14:02:03 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 14:02:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 14:02:03 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 14:02:03 2011] Source does appear to be extended
[Tue Oct  4 14:02:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 14:18:56 2011] Not overwriting source region fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_src.reg
[Tue Oct  4 14:18:56 2011] Extracting stamp from image fullrun_ccd3_acisf09452_pi14-548_cl_sm2.00.img.gz, (568, 663) - (631, 726)
[Tue Oct  4 14:18:56 2011] Writing fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7.gif
[Tue Oct  4 14:18:57 2011] ../../acisf09452/products/events/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_src.evt and ../../acisf09452/products/events/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Tue Oct  4 14:18:57 2011] Size of ../../acisf09452/products/events/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_src.evt.gz[events] = 141 counts
[Tue Oct  4 14:18:57 2011] Mean chipx,y = (603.70, 571.84)
[Tue Oct  4 14:18:57 2011] Mean tdetx,y = (4560.16, 3664.70)
[Tue Oct  4 14:18:57 2011] chipx,y range = (587.00-623.00, 552.00-590.00)
[Tue Oct  4 14:18:57 2011] Size of ../../acisf09452/products/events/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 7 counts
[Tue Oct  4 14:18:57 2011] ../../acisf09452/products/images/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_src.img and ../../acisf09452/products/images/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Tue Oct  4 14:18:57 2011] rmf not found, will run specextract
[Tue Oct  4 14:18:57 2011] arf not found, will run specextract
[Tue Oct  4 14:19:24 2011] ../../acisf09452/products/spectra/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7.warf not found
[Tue Oct  4 14:19:24 2011] ../../acisf09452/products/spectra/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7.wrmf not found
[Tue Oct  4 14:19:24 2011] Removal of ../../acisf09452/products/spectra/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7.soff failed
[Tue Oct  4 14:19:32 2011] ../../acisf09452/products/lightcurves/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_src.lc and ../../acisf09452/products/lightcurves/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Tue Oct  4 14:27:01 2011] Keeping rmf generated by specextract
[Tue Oct  4 14:27:01 2011] 188.012
[Tue Oct  4 14:27:06 2011] Updating aperture counts using extracted products
[Tue Oct  4 14:27:06 2011] Error reading totcts from fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_src.pi.gz
[Tue Oct  4 14:27:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 14:27:06 2011] Using photon index=1.80, rate=0.0103, arf fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7.arf
[Tue Oct  4 14:27:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 14:27:06 2011] Updating source flux to 1.3e-13
[Tue Oct  4 14:27:23 2011] Reading fit data from acisf09452/analysis//spectral/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_pl.csv
[Tue Oct  4 14:27:23 2011] Spectral fit parameter nH value = 2.54912e+16
[Tue Oct  4 14:27:23 2011] Spectral fit parameter PhoIndex value = 3.39659
[Tue Oct  4 14:27:23 2011] Failed to get F(0.3-8.0) from acisf09452/analysis//spectral/fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Tue Oct  4 14:27:23 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 14:27:23 2011] Using Nh = 2.5e+16, photon index=3.40, rate=0.0103, arf fullrun_ccd3_acisf09452_pi14-548_pass1_cl_src7.arf
[Tue Oct  4 14:27:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 14:27:23 2011] Updating source flux to 2e-13