[Fri Sep 23 03:55:31 2011] Detection parameters:
  Position = (995.1, 127.3) = 17 46 18.24 -28 51 38.8
  Extent = 0.6" x 0.5", rotation angle = 54 degrees
  Source counts = 16.0 +/- 4.6
  Background counts = 5.0
  Rate = 0.0003 +/- 9e-05

[Fri Sep 23 03:55:37 2011] Off-axis axis estimate = 0.72'
[Fri Sep 23 03:58:16 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:58:16 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 23 03:58:16 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.915
[Fri Sep 23 03:58:16 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.38"
[Fri Sep 23 03:58:18 2011] fullrun_ccd3_acisf00945_pi14-548_cl_pass0_src27.ximg exists
[Fri Sep 23 03:58:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00945_pi14-548_cl_pass0_src27.csv
[Fri Sep 23 03:58:18 2011] fullrun_ccd3_acisf00945_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Sep 23 03:58:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00945_pi14-548_cl_pass0_src27.csv
[Fri Sep 23 03:58:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00945_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00945_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:58:19 2011] fullrun_ccd3_acisf00945_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Sep 23 03:58:19 2011] fullrun_ccd3_acisf00945_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Sep 23 03:58:19 2011] Fit fullrun_ccd3_acisf00945_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Sep 23 03:58:56 2011] Spatial fit model total counts = 42.951600, observed total counts = 43.000000
[Fri Sep 23 03:58:56 2011] Offset between fit and detection position for source 4 = 0.371112 pixels
[Fri Sep 23 03:58:56 2011] 42.273900 total counts/ 27.493700 bgd. counts: snr = 2.818796
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.371112 pixels
  Position = (995.5, 127.3) = 17 46 18.24 -28 51 39.0
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 14.8 +/- 6.5
  Background counts = 27.5
  Rate = 0.0003 +/- 0.0001
[Fri Sep 23 03:58:56 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 03:58:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 03:58:56 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 03:58:56 2011] Source does appear to be extended
[Fri Sep 23 03:58:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 03:59:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:59:59 2011] Initial guess for spatial extent in simple fitting = 0.33"
[Fri Sep 23 03:59:59 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.089
[Fri Sep 23 03:59:59 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.33"
[Fri Sep 23 04:00:03 2011] fullrun_ccd3_acisf00945_pi14-548_cl_pass1_src26.ximg exists
[Fri Sep 23 04:00:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00945_pi14-548_cl_pass1_src26.csv
[Fri Sep 23 04:00:03 2011] fullrun_ccd3_acisf00945_pi14-548_cl_pass1_src26_1.ximg exists
[Fri Sep 23 04:00:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00945_pi14-548_cl_pass1_src26.csv
[Fri Sep 23 04:00:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00945_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00945_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 04:00:17 2011] fullrun_ccd3_acisf00945_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Fri Sep 23 04:00:17 2011] fullrun_ccd3_acisf00945_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Sep 23 04:00:17 2011] Fit fullrun_ccd3_acisf00945_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Sep 23 04:00:46 2011] Spatial fit model total counts = 42.910000, observed total counts = 43.000000
[Fri Sep 23 04:00:46 2011] Offset between fit and detection position for source 4 = 0.000720 pixels
[Fri Sep 23 04:00:46 2011] 42.232900 total counts/ 27.486800 bgd. counts: snr = 2.812646
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000720 pixels
  Position = (995.5, 127.3) = 17 46 18.24 -28 51 39.0
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 14.7 +/- 6.5
  Background counts = 27.5
  Rate = 0.0003 +/- 0.0001
[Fri Sep 23 04:00:46 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 04:00:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 04:00:46 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 04:00:46 2011] Source does appear to be extended
[Fri Sep 23 04:00:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 04:09:35 2011] Not overwriting source region fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_src.reg
[Fri Sep 23 04:09:35 2011] Extracting stamp from image fullrun_ccd3_acisf00945_pi14-548_cl_sm2.00.img.gz, (980, 112) - (1011, 143)
[Fri Sep 23 04:09:35 2011] Writing fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4.gif
[Fri Sep 23 04:11:42 2011] ../../acisf00945/products/events/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_src.evt and ../../acisf00945/products/events/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Sep 23 04:11:42 2011] Size of ../../acisf00945/products/events/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_src.evt.gz[events] = 16 counts
[Fri Sep 23 04:11:42 2011] Mean chipx,y = (996.81, 905.19)
[Fri Sep 23 04:11:42 2011] Mean tdetx,y = (4226.81, 4057.81)
[Fri Sep 23 04:11:42 2011] chipx,y range = (980.00-1012.00, 893.00-926.00)
[Fri Sep 23 04:11:42 2011] Size of ../../acisf00945/products/events/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 26 counts
[Fri Sep 23 04:11:42 2011] ../../acisf00945/products/images/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_src.img and ../../acisf00945/products/images/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Sep 23 04:11:42 2011] ../../acisf00945/products/spectra/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_src.pi and ../../acisf00945/products/spectra/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Sep 23 04:11:42 2011] Not generating rmf since there are only 14 counts
[Fri Sep 23 04:11:48 2011] ../../acisf00945/products/lightcurves/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_src.lc and ../../acisf00945/products/lightcurves/fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Sep 23 04:12:57 2011] 207.557
[Fri Sep 23 04:13:24 2011] Updating aperture counts using extracted products
[Fri Sep 23 04:13:24 2011] Error reading totcts from fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Sep 23 04:13:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 04:13:25 2011] Using photon index=1.80, rate=0.000302, arf fullrun_ccd3_acisf00945_pi14-548_pass1_cl_src4.arf
[Fri Sep 23 04:13:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 04:13:25 2011] Updating source flux to 4.5e-15
[Fri Sep 23 04:14:49 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting