[Fri Sep 23 03:55:28 2011] Detection parameters:
  Position = (932.3, 759.3) = 17 46 30.18 -28 54 41.8
  Extent = 0.8" x 0.5", rotation angle = 29 degrees
  Source counts = 23.9 +/- 5.4
  Background counts = 5.1
  Rate = 0.0005 +/- 0.0001

[Fri Sep 23 03:55:30 2011] Off-axis axis estimate = 3.31'
[Fri Sep 23 03:58:13 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:58:13 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Sep 23 03:58:13 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.909
[Fri Sep 23 03:58:13 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.65"
[Fri Sep 23 03:58:14 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src14.ximg exists
[Fri Sep 23 03:58:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src14.csv
[Fri Sep 23 03:58:14 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src14_1.ximg exists
[Fri Sep 23 03:58:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src14.csv
[Fri Sep 23 03:58:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:58:15 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri Sep 23 03:58:15 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Sep 23 03:58:15 2011] Fit fullrun_ccd2_acisf00945_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Sep 23 03:58:51 2011] Spatial fit model total counts = 46.226200, observed total counts = 46.000000
[Fri Sep 23 03:58:51 2011] Offset between fit and detection position for source 9 = 0.506872 pixels
[Fri Sep 23 03:58:51 2011] 45.808500 total counts/ 25.803600 bgd. counts: snr = 3.938186
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.506872 pixels
  Position = (932.8, 759.3) = 17 46 30.18 -28 54 42.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 20.0 +/- 6.8
  Background counts = 25.8
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 03:58:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 03:58:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 03:58:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 03:58:51 2011] Source does appear to be extended
[Fri Sep 23 03:58:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 03:59:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:59:54 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Sep 23 03:59:54 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.258
[Fri Sep 23 03:59:54 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.41"
[Fri Sep 23 03:59:55 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src13.ximg exists
[Fri Sep 23 03:59:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src13.csv
[Fri Sep 23 03:59:55 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Sep 23 03:59:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src13.csv
[Fri Sep 23 03:59:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:59:56 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Sep 23 03:59:56 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Sep 23 03:59:56 2011] Fit fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Sep 23 04:00:41 2011] Spatial fit model total counts = 45.307000, observed total counts = 46.000000
[Fri Sep 23 04:00:41 2011] Offset between fit and detection position for source 9 = 0.002241 pixels
[Fri Sep 23 04:00:41 2011] 44.337500 total counts/ 24.288100 bgd. counts: snr = 4.068222
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.002241 pixels
  Position = (932.8, 759.3) = 17 46 30.18 -28 54 42.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 20.0 +/- 6.7
  Background counts = 24.3
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 04:00:41 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 04:00:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 04:00:41 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 04:00:41 2011] Source does appear to be extended
[Fri Sep 23 04:00:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 04:06:38 2011] Not overwriting source region fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_src.reg
[Fri Sep 23 04:06:38 2011] Extracting stamp from image fullrun_ccd2_acisf00945_pi14-548_cl_sm2.00.img.gz, (914, 741) - (952, 778)
[Fri Sep 23 04:06:38 2011] Writing fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9.gif
[Fri Sep 23 04:07:43 2011] ../../acisf00945/products/events/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_src.evt and ../../acisf00945/products/events/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Sep 23 04:07:43 2011] Size of ../../acisf00945/products/events/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_src.evt.gz[events] = 22 counts
[Fri Sep 23 04:07:43 2011] Mean chipx,y = (248.50, 720.05)
[Fri Sep 23 04:07:43 2011] Mean tdetx,y = (3781.05, 3837.50)
[Fri Sep 23 04:07:43 2011] chipx,y range = (229.00-263.00, 705.00-737.00)
[Fri Sep 23 04:07:43 2011] Size of ../../acisf00945/products/events/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 26 counts
[Fri Sep 23 04:07:43 2011] ../../acisf00945/products/images/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_src.img and ../../acisf00945/products/images/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Sep 23 04:07:43 2011] ../../acisf00945/products/spectra/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_src.pi and ../../acisf00945/products/spectra/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Sep 23 04:07:43 2011] Not generating rmf since there are only 20 counts
[Fri Sep 23 04:07:47 2011] ../../acisf00945/products/lightcurves/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_src.lc and ../../acisf00945/products/lightcurves/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Sep 23 04:09:33 2011] 200.349
[Fri Sep 23 04:13:23 2011] Updating aperture counts using extracted products
[Fri Sep 23 04:13:23 2011] Error reading totcts from fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Sep 23 04:13:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 04:13:23 2011] Using photon index=1.80, rate=0.000411, arf fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src9.arf
[Fri Sep 23 04:13:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 04:13:23 2011] Updating source flux to 6.3e-15
[Fri Sep 23 04:14:18 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting