[Fri Sep 23 03:55:29 2011] Detection parameters:
  Position = (783.3, 322.3) = 17 46 35.77 -28 58 16.7
  Extent = 1.6" x 1.1", rotation angle = 160 degrees
  Source counts = 13.3 +/- 4.7
  Background counts = 8.7
  Rate = 0.0003 +/- 0.0001

[Fri Sep 23 03:55:30 2011] Off-axis axis estimate = 6.94'
[Fri Sep 23 03:58:13 2011] Using EEF radius (= 2.14 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:58:13 2011] Initial guess for spatial extent in simple fitting = 2.14"
[Fri Sep 23 03:58:13 2011] source mask rpix=4.4, npix_max = 94, mask sum = 100, frac = 1.060
[Fri Sep 23 03:58:13 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 2.14"
[Fri Sep 23 03:58:15 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src32.ximg exists
[Fri Sep 23 03:58:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src32.csv
[Fri Sep 23 03:58:15 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src32_1.ximg exists
[Fri Sep 23 03:58:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src32.csv
[Fri Sep 23 03:58:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:58:15 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Fri Sep 23 03:58:15 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Fri Sep 23 03:58:15 2011] Fit fullrun_ccd2_acisf00945_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Fri Sep 23 03:58:51 2011] Spatial fit model total counts = 46.000000, observed total counts = 46.000000
[Fri Sep 23 03:58:51 2011] Offset between fit and detection position for source 33 = 1.667787 pixels
[Fri Sep 23 03:58:51 2011] 46.109800 total counts/ 35.894300 bgd. counts: snr = 1.705088
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 1.667787 pixels
  Position = (783.4, 324.0) = 17 46 35.79 -28 58 16.2
  Extent = 1.0 (0.5-1.7)", rotation angle = 0
  Source counts = 10.2 +/- 6.8
  Background counts = 35.9
  Rate = 0.0002 +/- 0.0001
[Fri Sep 23 03:58:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 03:58:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 03:58:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 03:58:51 2011] Source does appear to be extended
[Fri Sep 23 03:58:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 03:59:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:59:54 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Fri Sep 23 03:59:54 2011] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.176
[Fri Sep 23 03:59:54 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 1.00"
[Fri Sep 23 03:59:55 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src29.ximg exists
[Fri Sep 23 03:59:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src29.csv
[Fri Sep 23 03:59:55 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src29_1.ximg exists
[Fri Sep 23 03:59:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src29.csv
[Fri Sep 23 03:59:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:59:58 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Fri Sep 23 03:59:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src29.csv
[Fri Sep 23 03:59:58 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Sep 23 03:59:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src29.csv
[Fri Sep 23 03:59:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 04:00:41 2011] Spatial fit model total counts = 17.579600, observed total counts = 20.000000
[Fri Sep 23 04:00:41 2011] Offset between fit and detection position for source 33 = 0.654989 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.654989 pixels
  Position = (784.0, 323.6) = 17 46 35.77 -28 58 16.4
  Extent = 1.3 (0.7-1.7)", rotation angle = 0
  Source counts = 16.6 +/- 4.1
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
 Deleting source due to low signal-to-noise ratio