[Fri Sep 23 03:55:28 2011] Detection parameters:
  Position = (813.0, 905.2) = 17 46 34.65 -28 53 29.9
  Extent = 0.9" x 0.6", rotation angle = 101 degrees
  Source counts = 21.2 +/- 5.3
  Background counts = 6.8
  Rate = 0.0004 +/- 0.0001

[Fri Sep 23 03:55:30 2011] Off-axis axis estimate = 3.47'
[Fri Sep 23 03:58:13 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:58:13 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Sep 23 03:58:13 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.115
[Fri Sep 23 03:58:13 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.69"
[Fri Sep 23 03:58:14 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src18.ximg exists
[Fri Sep 23 03:58:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src18.csv
[Fri Sep 23 03:58:14 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src18_1.ximg exists
[Fri Sep 23 03:58:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src18.csv
[Fri Sep 23 03:58:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00945_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:58:15 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Fri Sep 23 03:58:15 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Sep 23 03:58:15 2011] Fit fullrun_ccd2_acisf00945_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Sep 23 03:58:51 2011] Spatial fit model total counts = 38.985200, observed total counts = 39.000000
[Fri Sep 23 03:58:51 2011] Offset between fit and detection position for source 13 = 1.046713 pixels
[Fri Sep 23 03:58:51 2011] 38.708900 total counts/ 18.755200 bgd. counts: snr = 4.607471
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.046713 pixels
  Position = (813.1, 906.3) = 17 46 34.67 -28 53 29.7
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 20.0 +/- 6.2
  Background counts = 18.8
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 03:58:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 03:58:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 03:58:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 03:58:51 2011] Source does appear to be extended
[Fri Sep 23 03:58:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 03:59:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:59:54 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Sep 23 03:59:54 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.051
[Fri Sep 23 03:59:54 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.59"
[Fri Sep 23 03:59:55 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src17.ximg exists
[Fri Sep 23 03:59:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src17.csv
[Fri Sep 23 03:59:55 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Sep 23 03:59:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src17.csv
[Fri Sep 23 03:59:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00945_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:59:56 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Sep 23 03:59:56 2011] fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Sep 23 03:59:56 2011] Fit fullrun_ccd2_acisf00945_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Sep 23 04:00:41 2011] Spatial fit model total counts = 36.977300, observed total counts = 37.000000
[Fri Sep 23 04:00:41 2011] Offset between fit and detection position for source 13 = 0.017548 pixels
[Fri Sep 23 04:00:41 2011] 36.218200 total counts/ 16.087100 bgd. counts: snr = 5.019132
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.017548 pixels
  Position = (813.1, 906.3) = 17 46 34.67 -28 53 29.7
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 20.1 +/- 6.0
  Background counts = 16.1
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 04:00:41 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 04:00:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 04:00:41 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 04:00:41 2011] Source does appear to be extended
[Fri Sep 23 04:00:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 04:06:38 2011] Not overwriting source region fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_src.reg
[Fri Sep 23 04:06:38 2011] Extracting stamp from image fullrun_ccd2_acisf00945_pi14-548_cl_sm2.00.img.gz, (786, 880) - (840, 933)
[Fri Sep 23 04:06:38 2011] Writing fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13.gif
[Fri Sep 23 04:08:03 2011] ../../acisf00945/products/events/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_src.evt and ../../acisf00945/products/events/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Sep 23 04:08:04 2011] Size of ../../acisf00945/products/events/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_src.evt.gz[events] = 23 counts
[Fri Sep 23 04:08:04 2011] Mean chipx,y = (401.70, 832.70)
[Fri Sep 23 04:08:04 2011] Mean tdetx,y = (3893.70, 3684.30)
[Fri Sep 23 04:08:04 2011] chipx,y range = (382.00-418.00, 817.00-852.00)
[Fri Sep 23 04:08:04 2011] Size of ../../acisf00945/products/events/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 90 counts
[Fri Sep 23 04:08:04 2011] ../../acisf00945/products/images/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_src.img and ../../acisf00945/products/images/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Sep 23 04:08:04 2011] ../../acisf00945/products/spectra/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_src.pi and ../../acisf00945/products/spectra/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri Sep 23 04:08:04 2011] Not generating rmf since there are only 20 counts
[Fri Sep 23 04:08:07 2011] ../../acisf00945/products/lightcurves/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_src.lc and ../../acisf00945/products/lightcurves/fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Sep 23 04:09:33 2011] 197.048
[Fri Sep 23 04:13:23 2011] Updating aperture counts using extracted products
[Fri Sep 23 04:13:23 2011] Error reading totcts from fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Sep 23 04:13:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 04:13:23 2011] Using photon index=1.80, rate=0.000413, arf fullrun_ccd2_acisf00945_pi14-548_pass1_cl_src13.arf
[Fri Sep 23 04:13:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 04:13:23 2011] Updating source flux to 6.4e-15
[Fri Sep 23 04:14:18 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting