[Fri Sep 23 03:55:22 2011] Detection parameters:
  Position = (360.9, 254.4) = 17 46 4.24 -28 52 42.6
  Extent = 0.7" x 0.7", rotation angle = 95 degrees
  Source counts = 14.6 +/- 4.5
  Background counts = 5.4
  Rate = 0.0003 +/- 9e-05

[Fri Sep 23 03:55:26 2011] Off-axis axis estimate = 3.43'
[Fri Sep 23 03:58:11 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:58:11 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Sep 23 03:58:11 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.857
[Fri Sep 23 03:58:11 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.67"
[Fri Sep 23 03:58:12 2011] fullrun_ccd1_acisf00945_pi14-548_cl_pass0_src29.ximg exists
[Fri Sep 23 03:58:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00945_pi14-548_cl_pass0_src29.csv
[Fri Sep 23 03:58:12 2011] fullrun_ccd1_acisf00945_pi14-548_cl_pass0_src29_1.ximg exists
[Fri Sep 23 03:58:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00945_pi14-548_cl_pass0_src29.csv
[Fri Sep 23 03:58:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00945_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00945_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:58:13 2011] fullrun_ccd1_acisf00945_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Fri Sep 23 03:58:13 2011] fullrun_ccd1_acisf00945_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Sep 23 03:58:13 2011] Fit fullrun_ccd1_acisf00945_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Sep 23 03:58:43 2011] Spatial fit model total counts = 34.977600, observed total counts = 35.000000
[Fri Sep 23 03:58:43 2011] Offset between fit and detection position for source 6 = 0.358590 pixels
[Fri Sep 23 03:58:43 2011] 36.428300 total counts/ 25.901000 bgd. counts: snr = 2.068515
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.358590 pixels
  Position = (360.5, 254.4) = 17 46 4.27 -28 52 42.8
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 10.5 +/- 6.0
  Background counts = 25.9
  Rate = 0.0002 +/- 0.0001
[Fri Sep 23 03:58:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 03:58:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 03:58:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 03:58:43 2011] Source does appear to be extended
[Fri Sep 23 03:58:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 03:59:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:59:51 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Fri Sep 23 03:59:51 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.023
[Fri Sep 23 03:59:51 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 0.48"
[Fri Sep 23 03:59:53 2011] fullrun_ccd1_acisf00945_pi14-548_cl_pass1_src29.ximg exists
[Fri Sep 23 03:59:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00945_pi14-548_cl_pass1_src29.csv
[Fri Sep 23 03:59:53 2011] fullrun_ccd1_acisf00945_pi14-548_cl_pass1_src29_1.ximg exists
[Fri Sep 23 03:59:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00945_pi14-548_cl_pass1_src29.csv
[Fri Sep 23 03:59:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00945_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00945_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:59:54 2011] fullrun_ccd1_acisf00945_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Fri Sep 23 03:59:54 2011] fullrun_ccd1_acisf00945_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Sep 23 03:59:54 2011] Fit fullrun_ccd1_acisf00945_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Sep 23 04:00:34 2011] Spatial fit model total counts = 34.978400, observed total counts = 35.000000
[Fri Sep 23 04:00:34 2011] Offset between fit and detection position for source 6 = 0.011057 pixels
[Fri Sep 23 04:00:34 2011] 36.430100 total counts/ 25.914900 bgd. counts: snr = 2.065584
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.011057 pixels
  Position = (360.5, 254.4) = 17 46 4.27 -28 52 42.9
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 10.5 +/- 6.0
  Background counts = 25.9
  Rate = 0.0002 +/- 0.0001
[Fri Sep 23 04:00:34 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 04:00:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 04:00:34 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 04:00:34 2011] Source does appear to be extended
[Fri Sep 23 04:00:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 04:03:48 2011] Not overwriting source region fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 23 04:03:48 2011] Extracting stamp from image fullrun_ccd1_acisf00945_pi14-548_cl_sm2.00.img.gz, (338, 232) - (383, 276)
[Fri Sep 23 04:03:48 2011] Writing fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6.gif
[Fri Sep 23 04:05:50 2011] ../../acisf00945/products/events/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_src.evt and ../../acisf00945/products/events/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 23 04:05:51 2011] Size of ../../acisf00945/products/events/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_src.evt.gz[events] = 16 counts
[Fri Sep 23 04:05:51 2011] Mean chipx,y = (342.19, 942.25)
[Fri Sep 23 04:05:51 2011] Mean tdetx,y = (4189.75, 4449.19)
[Fri Sep 23 04:05:51 2011] chipx,y range = (327.00-358.00, 926.00-959.00)
[Fri Sep 23 04:05:51 2011] Size of ../../acisf00945/products/events/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 46 counts
[Fri Sep 23 04:05:51 2011] ../../acisf00945/products/images/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_src.img and ../../acisf00945/products/images/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 23 04:05:51 2011] ../../acisf00945/products/spectra/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_src.pi and ../../acisf00945/products/spectra/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 23 04:05:51 2011] Not generating rmf since there are only 10 counts
[Fri Sep 23 04:05:54 2011] ../../acisf00945/products/lightcurves/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_src.lc and ../../acisf00945/products/lightcurves/fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 23 04:06:36 2011] 200.812
[Fri Sep 23 04:13:22 2011] Updating aperture counts using extracted products
[Fri Sep 23 04:13:22 2011] Error reading totcts from fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 23 04:13:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 04:13:23 2011] Using photon index=1.80, rate=0.000216, arf fullrun_ccd1_acisf00945_pi14-548_pass1_cl_src6.arf
[Fri Sep 23 04:13:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 04:13:23 2011] Updating source flux to 3.3e-15
[Fri Sep 23 04:13:56 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting