[Sat Oct 22 07:25:13 2011] Detection parameters:
  Position = (422.5, 105.0) = 17 47 34.14 -28 25 41.2
  Extent = 1.5" x 1.1", rotation angle = 51 degrees
  Source counts = 22.5 +/- 5.8
  Background counts = 11.5
  Rate = 0.0002 +/- 6e-05

[Sat Oct 22 07:25:16 2011] Off-axis axis estimate = 5.96'
[Sat Oct 22 07:27:13 2011] Using EEF radius (= 1.61 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 07:27:13 2011] Initial guess for spatial extent in simple fitting = 1.61"
[Sat Oct 22 07:27:13 2011] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.981
[Sat Oct 22 07:27:13 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.61"
[Sat Oct 22 07:27:14 2011] fullrun_ccd0_acisf00944_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 22 07:27:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00944_pi14-548_cl_pass0_src10.csv
[Sat Oct 22 07:27:14 2011] fullrun_ccd0_acisf00944_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 22 07:27:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00944_pi14-548_cl_pass0_src10.csv
[Sat Oct 22 07:27:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00944_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00944_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 07:27:15 2011] fullrun_ccd0_acisf00944_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 22 07:27:15 2011] fullrun_ccd0_acisf00944_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 22 07:27:15 2011] Fit fullrun_ccd0_acisf00944_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 22 07:27:49 2011] Spatial fit model total counts = 35.643500, observed total counts = 36.000000
[Sat Oct 22 07:27:49 2011] Offset between fit and detection position for source 10 = 0.462775 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.462775 pixels
  Position = (422.9, 105.1) = 17 47 34.14 -28 25 41.4
  Extent = 2.0 (0.8-2.6)", rotation angle = 0
  Source counts = 35.9 +/- 6.0
  Background counts = 0.0
  Rate = 0.0004 +/- 6e-05
[Sat Oct 22 07:27:49 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 07:27:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 07:27:49 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 07:27:49 2011] Source does appear to be extended
[Sat Oct 22 07:27:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 07:28:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 07:28:48 2011] Initial guess for spatial extent in simple fitting = 2.00"
[Sat Oct 22 07:28:48 2011] source mask rpix=4.1, npix_max = 83, mask sum = 90, frac = 1.075
[Sat Oct 22 07:28:48 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 2.00"
[Sat Oct 22 07:28:49 2011] fullrun_ccd0_acisf00944_pi14-548_cl_pass1_src10.ximg exists
[Sat Oct 22 07:28:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00944_pi14-548_cl_pass1_src10.csv
[Sat Oct 22 07:28:49 2011] fullrun_ccd0_acisf00944_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Oct 22 07:28:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00944_pi14-548_cl_pass1_src10.csv
[Sat Oct 22 07:28:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00944_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00944_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 07:28:50 2011] fullrun_ccd0_acisf00944_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Oct 22 07:28:50 2011] fullrun_ccd0_acisf00944_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Oct 22 07:28:50 2011] Fit fullrun_ccd0_acisf00944_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Oct 22 07:29:22 2011] Spatial fit model total counts = 43.887500, observed total counts = 44.000000
[Sat Oct 22 07:29:22 2011] Offset between fit and detection position for source 10 = 0.379453 pixels
[Sat Oct 22 07:29:22 2011] 44.110900 total counts/ 19.959900 bgd. counts: snr = 5.405750
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.379453 pixels
  Position = (422.6, 105.2) = 17 47 34.15 -28 25 41.4
  Extent = 1.5 (0.8-2.5)", rotation angle = 0
  Source counts = 24.2 +/- 6.6
  Background counts = 20.0
  Rate = 0.0002 +/- 7e-05
[Sat Oct 22 07:29:22 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 07:29:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 07:29:22 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 07:29:22 2011] Source does appear to be extended
[Sat Oct 22 07:29:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 07:30:19 2011] Not overwriting source region fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_src.reg
[Sat Oct 22 07:30:19 2011] Extracting stamp from image fullrun_ccd0_acisf00944_pi14-548_cl_sm2.00.img.gz, (354, 37) - (491, 174)
[Sat Oct 22 07:30:19 2011] Writing fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10.gif
[Sat Oct 22 07:30:49 2011] ../../acisf00944/products/events/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_src.evt and ../../acisf00944/products/events/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Oct 22 07:30:49 2011] Size of ../../acisf00944/products/events/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_src.evt.gz[events] = 39 counts
[Sat Oct 22 07:30:49 2011] Mean chipx,y = (376.82, 946.92)
[Sat Oct 22 07:30:49 2011] Mean tdetx,y = (4007.92, 4755.18)
[Sat Oct 22 07:30:49 2011] chipx,y range = (358.00-398.00, 925.00-972.00)
[Sat Oct 22 07:30:49 2011] Size of ../../acisf00944/products/events/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 265 counts
[Sat Oct 22 07:30:49 2011] ../../acisf00944/products/images/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_src.img and ../../acisf00944/products/images/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Oct 22 07:30:49 2011] ../../acisf00944/products/spectra/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_src.pi and ../../acisf00944/products/spectra/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Oct 22 07:30:49 2011] Not generating rmf since there are only 24 counts
[Sat Oct 22 07:30:51 2011] ../../acisf00944/products/lightcurves/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_src.lc and ../../acisf00944/products/lightcurves/fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Oct 22 07:32:32 2011] 190.146
[Sat Oct 22 07:43:17 2011] Updating aperture counts using extracted products
[Sat Oct 22 07:43:17 2011] Error reading totcts from fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Oct 22 07:43:17 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 07:43:17 2011] Using photon index=1.80, rate=0.000245, arf fullrun_ccd0_acisf00944_pi14-548_pass1_cl_src10.arf
[Sat Oct 22 07:43:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 07:43:17 2011] Updating source flux to 3.9e-15
[Sat Oct 22 07:43:30 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting