[Tue Oct  4 09:22:21 2011] Detection parameters:
  Position = (445.8, 515.5) = 12 12 49.83 6 59 45.7
  Extent = 0.5" x 0.5", rotation angle = 0 degrees
  Source counts = 36.8 +/- 6.1
  Background counts = 0.2
  Rate = 0.02 +/- 0.003

[Tue Oct  4 09:22:22 2011] Off-axis axis estimate = 4.51'
[Tue Oct  4 09:23:12 2011] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 09:23:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 09:23:12 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Tue Oct  4 09:23:12 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.978
[Tue Oct  4 09:23:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.00"
[Tue Oct  4 09:23:13 2011] fullrun_ccd3_acisf09438_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct  4 09:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09438_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 09:23:13 2011] fullrun_ccd3_acisf09438_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct  4 09:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09438_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 09:23:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09438_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09438_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 09:23:13 2011] fullrun_ccd3_acisf09438_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 09:23:13 2011] fullrun_ccd3_acisf09438_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 09:23:13 2011] Fit fullrun_ccd3_acisf09438_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 09:23:18 2011] Spatial fit model total counts = 46.932200, observed total counts = 44.000000
[Tue Oct  4 09:23:18 2011] Offset between fit and detection position for source 3 = 1.021868 pixels
[Tue Oct  4 09:23:18 2011] 46.911460 total counts/ 6.617460 bgd. counts: snr = 15.663713
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.021868 pixels
  Position = (446.4, 516.4) = 12 12 49.82 6 59 45.9
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 40.3 +/- 6.8
  Background counts = 6.6
  Rate = 0.02 +/- 0.003
[Tue Oct  4 09:23:18 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 09:23:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 09:23:18 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 09:23:18 2011] Source does appear to be extended
[Tue Oct  4 09:23:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 09:23:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 09:23:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 09:23:30 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Tue Oct  4 09:23:30 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.155
[Tue Oct  4 09:23:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.67"
[Tue Oct  4 09:23:30 2011] fullrun_ccd3_acisf09438_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct  4 09:23:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09438_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 09:23:30 2011] fullrun_ccd3_acisf09438_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct  4 09:23:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09438_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 09:23:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09438_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09438_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 09:23:30 2011] fullrun_ccd3_acisf09438_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 09:23:30 2011] fullrun_ccd3_acisf09438_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 09:23:30 2011] Fit fullrun_ccd3_acisf09438_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 09:23:35 2011] Spatial fit model total counts = 47.350200, observed total counts = 44.000000
[Tue Oct  4 09:23:35 2011] Offset between fit and detection position for source 3 = 0.019821 pixels
[Tue Oct  4 09:23:35 2011] 47.072490 total counts/ 7.027590 bgd. counts: snr = 15.105810
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.019821 pixels
  Position = (446.4, 516.4) = 12 12 49.82 6 59 45.9
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 40.0 +/- 6.9
  Background counts = 7.0
  Rate = 0.02 +/- 0.003
[Tue Oct  4 09:23:35 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 09:23:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 09:23:35 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 09:23:35 2011] Source does appear to be extended
[Tue Oct  4 09:23:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 09:27:08 2011] Not overwriting source region fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_src.reg
[Tue Oct  4 09:27:08 2011] Extracting stamp from image fullrun_ccd3_acisf09438_pi14-548_cl_sm2.00.img.gz, (417, 487) - (476, 546)
[Tue Oct  4 09:27:08 2011] Writing fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3.gif
[Tue Oct  4 09:27:08 2011] ../../acisf09438/products/events/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_src.evt and ../../acisf09438/products/events/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Oct  4 09:27:08 2011] Size of ../../acisf09438/products/events/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_src.evt.gz[events] = 41 counts
[Tue Oct  4 09:27:08 2011] Mean chipx,y = (771.15, 499.02)
[Tue Oct  4 09:27:08 2011] Mean tdetx,y = (4632.98, 3832.15)
[Tue Oct  4 09:27:08 2011] chipx,y range = (755.00-790.00, 481.00-517.00)
[Tue Oct  4 09:27:08 2011] Size of ../../acisf09438/products/events/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1 counts
[Tue Oct  4 09:27:08 2011] ../../acisf09438/products/images/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_src.img and ../../acisf09438/products/images/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Oct  4 09:27:08 2011] Not generating rmf since there are only 40 counts
[Tue Oct  4 09:27:08 2011] arf not found, will run specextract
[Tue Oct  4 09:27:32 2011] ../../acisf09438/products/spectra/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3.warf not found
[Tue Oct  4 09:27:32 2011] ../../acisf09438/products/spectra/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3.wrmf not found
[Tue Oct  4 09:27:32 2011] Removal of ../../acisf09438/products/spectra/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3.soff failed
[Tue Oct  4 09:27:42 2011] ../../acisf09438/products/lightcurves/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_src.lc and ../../acisf09438/products/lightcurves/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Oct  4 09:28:22 2011] Spectrum 3 has only 40 counts, deleting rmf
[Tue Oct  4 09:28:22 2011] 184.498
[Tue Oct  4 09:28:23 2011] Updating aperture counts using extracted products
[Tue Oct  4 09:28:23 2011] Error reading totcts from fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Oct  4 09:28:23 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 09:28:23 2011] Using photon index=1.80, rate=0.0191, arf fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3.arf
[Tue Oct  4 09:28:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 09:28:23 2011] Updating source flux to 2.4e-13
[Tue Oct  4 09:28:27 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct  4 09:28:28 2011] acisf09438/analysis//spectral/fullrun_ccd3_acisf09438_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete