[Mon Oct 17 17:07:06 2011] Detection parameters:
  Position = (1002.3, 361.0) = 4 53 57.24 2 53 9.7
  Extent = 0.5" x 0.5", rotation angle = 17 degrees
  Source counts = 14.1 +/- 4.1
  Background counts = 2.9
  Rate = 0.0001 +/- 4e-05

[Mon Oct 17 17:07:07 2011] Off-axis axis estimate = 2.91'
[Mon Oct 17 17:08:41 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 17:08:41 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Mon Oct 17 17:08:41 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.114
[Mon Oct 17 17:08:41 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.56"
[Mon Oct 17 17:08:43 2011] fullrun_ccd3_acisf09430_pi14-548_cl_pass0_src31.ximg exists
[Mon Oct 17 17:08:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09430_pi14-548_cl_pass0_src31.csv
[Mon Oct 17 17:08:43 2011] fullrun_ccd3_acisf09430_pi14-548_cl_pass0_src31_1.ximg exists
[Mon Oct 17 17:08:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09430_pi14-548_cl_pass0_src31.csv
[Mon Oct 17 17:08:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09430_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09430_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 17:08:44 2011] fullrun_ccd3_acisf09430_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Mon Oct 17 17:08:44 2011] fullrun_ccd3_acisf09430_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Oct 17 17:08:44 2011] Fit fullrun_ccd3_acisf09430_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Oct 17 17:09:04 2011] Spatial fit model total counts = 25.999700, observed total counts = 26.000000
[Mon Oct 17 17:09:04 2011] Offset between fit and detection position for source 21 = 0.841472 pixels
[Mon Oct 17 17:09:04 2011] 25.876300 total counts/ 10.439900 bgd. counts: snr = 4.777469
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.841472 pixels
  Position = (1002.9, 361.5) = 4 53 57.23 2 53 9.7
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 15.4 +/- 5.1
  Background counts = 10.4
  Rate = 0.0001 +/- 4e-05
[Mon Oct 17 17:09:04 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 17:09:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 17:09:04 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 17:09:04 2011] Source does appear to be extended
[Mon Oct 17 17:09:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 17:09:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 17:09:34 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Mon Oct 17 17:09:34 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.960
[Mon Oct 17 17:09:34 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.51"
[Mon Oct 17 17:09:35 2011] fullrun_ccd3_acisf09430_pi14-548_cl_pass1_src26.ximg exists
[Mon Oct 17 17:09:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09430_pi14-548_cl_pass1_src26.csv
[Mon Oct 17 17:09:35 2011] fullrun_ccd3_acisf09430_pi14-548_cl_pass1_src26_1.ximg exists
[Mon Oct 17 17:09:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09430_pi14-548_cl_pass1_src26.csv
[Mon Oct 17 17:09:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09430_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09430_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 17:09:36 2011] fullrun_ccd3_acisf09430_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Mon Oct 17 17:09:36 2011] fullrun_ccd3_acisf09430_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Oct 17 17:09:36 2011] Fit fullrun_ccd3_acisf09430_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Oct 17 17:09:53 2011] Spatial fit model total counts = 25.975700, observed total counts = 26.000000
[Mon Oct 17 17:09:53 2011] Offset between fit and detection position for source 21 = 0.025442 pixels
[Mon Oct 17 17:09:53 2011] 25.852900 total counts/ 10.430400 bgd. counts: snr = 4.775340
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.025442 pixels
  Position = (1002.9, 361.6) = 4 53 57.23 2 53 9.7
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 15.4 +/- 5.1
  Background counts = 10.4
  Rate = 0.0001 +/- 4e-05
[Mon Oct 17 17:09:53 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 17:09:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 17:09:53 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 17:09:53 2011] Source does appear to be extended
[Mon Oct 17 17:09:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 17:14:05 2011] Not overwriting source region fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_src.reg
[Mon Oct 17 17:14:05 2011] Extracting stamp from image fullrun_ccd3_acisf09430_pi14-548_cl_sm2.00.img.gz, (980, 338) - (1026, 385)
[Mon Oct 17 17:14:05 2011] Writing fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21.gif
[Mon Oct 17 17:15:13 2011] ../../acisf09430/products/events/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_src.evt and ../../acisf09430/products/events/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Mon Oct 17 17:15:13 2011] Size of ../../acisf09430/products/events/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_src.evt.gz[events] = 17 counts
[Mon Oct 17 17:15:13 2011] Mean chipx,y = (937.29, 670.29)
[Mon Oct 17 17:15:13 2011] Mean tdetx,y = (4461.71, 3998.29)
[Mon Oct 17 17:15:13 2011] chipx,y range = (920.00-955.00, 651.00-684.00)
[Mon Oct 17 17:15:13 2011] Size of ../../acisf09430/products/events/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 38 counts
[Mon Oct 17 17:15:13 2011] ../../acisf09430/products/images/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_src.img and ../../acisf09430/products/images/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Mon Oct 17 17:15:13 2011] ../../acisf09430/products/spectra/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_src.pi and ../../acisf09430/products/spectra/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Mon Oct 17 17:15:13 2011] Not generating rmf since there are only 15 counts
[Mon Oct 17 17:15:17 2011] ../../acisf09430/products/lightcurves/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_src.lc and ../../acisf09430/products/lightcurves/fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Mon Oct 17 17:15:20 2011] 199.35
[Mon Oct 17 17:15:38 2011] Updating aperture counts using extracted products
[Mon Oct 17 17:15:38 2011] Error reading totcts from fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21_src.pi.gz
[Mon Oct 17 17:15:39 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 17:15:39 2011] Using photon index=1.80, rate=0.000136, arf fullrun_ccd3_acisf09430_pi14-548_pass1_cl_src21.arf
[Mon Oct 17 17:15:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 17:15:39 2011] Updating source flux to 1.5e-15
[Mon Oct 17 17:16:19 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting