[Mon Sep 26 05:40:40 2011] Detection parameters:
  Position = (499.2, 857.4) = 4 54 44.97 2 52 0.7
  Extent = 0.6" x 0.5", rotation angle = 48 degrees
  Source counts = 71.3 +/- 9.3
  Background counts = 14.7
  Rate = 0.0006 +/- 8e-05

[Mon Sep 26 05:40:45 2011] Off-axis axis estimate = 7.11'
[Mon Sep 26 05:42:35 2011] Using EEF radius (= 2.25 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:42:35 2011] Initial guess for spatial extent in simple fitting = 2.25"
[Mon Sep 26 05:42:35 2011] source mask rpix=4.6, npix_max = 102, mask sum = 85, frac = 0.827
[Mon Sep 26 05:42:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.25"
[Mon Sep 26 05:42:42 2011] fullrun_ccd2_acisf09426_pi14-548_cl_pass0_src3.ximg exists
[Mon Sep 26 05:42:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09426_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 05:42:42 2011] fullrun_ccd2_acisf09426_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Sep 26 05:42:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09426_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 05:42:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09426_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09426_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:42:44 2011] fullrun_ccd2_acisf09426_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep 26 05:42:44 2011] fullrun_ccd2_acisf09426_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep 26 05:42:44 2011] Fit fullrun_ccd2_acisf09426_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Sep 26 05:43:25 2011] Spatial fit model total counts = 127.610000, observed total counts = 126.000000
[Mon Sep 26 05:43:25 2011] Offset between fit and detection position for source 3 = 1.892211 pixels
[Mon Sep 26 05:43:25 2011] 128.597500 total counts/ 33.365600 bgd. counts: snr = 16.486671
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.892211 pixels
  Position = (499.0, 859.3) = 4 54 44.99 2 52 1.4
  Extent = 1.8 (1.5-2.3)", rotation angle = 0
  Source counts = 95.2 +/- 11.3
  Background counts = 33.4
  Rate = 0.0009 +/- 0.0001
[Mon Sep 26 05:43:25 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:43:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:43:25 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:43:25 2011] Source does appear to be extended
[Mon Sep 26 05:43:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:44:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:44:05 2011] Initial guess for spatial extent in simple fitting = 1.83"
[Mon Sep 26 05:44:05 2011] source mask rpix=3.7, npix_max = 70, mask sum = 57, frac = 0.804
[Mon Sep 26 05:44:05 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.83"
[Mon Sep 26 05:44:05 2011] fullrun_ccd2_acisf09426_pi14-548_cl_pass1_src3.ximg exists
[Mon Sep 26 05:44:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09426_pi14-548_cl_pass1_src3.csv
[Mon Sep 26 05:44:05 2011] fullrun_ccd2_acisf09426_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Sep 26 05:44:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09426_pi14-548_cl_pass1_src3.csv
[Mon Sep 26 05:44:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09426_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09426_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:44:06 2011] fullrun_ccd2_acisf09426_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Sep 26 05:44:06 2011] fullrun_ccd2_acisf09426_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Sep 26 05:44:06 2011] Fit fullrun_ccd2_acisf09426_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Sep 26 05:44:26 2011] Spatial fit model total counts = 119.452000, observed total counts = 115.000000
[Mon Sep 26 05:44:26 2011] Offset between fit and detection position for source 3 = 0.259601 pixels
[Mon Sep 26 05:44:26 2011] 120.024100 total counts/ 29.860000 bgd. counts: snr = 16.500183
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.259601 pixels
  Position = (499.1, 859.5) = 4 54 44.99 2 52 1.5
  Extent = 1.7 (1.3-2.3)", rotation angle = 0
  Source counts = 90.2 +/- 11.0
  Background counts = 29.9
  Rate = 0.0008 +/- 0.0001
[Mon Sep 26 05:44:26 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:44:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:44:26 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:44:26 2011] Source does appear to be extended
[Mon Sep 26 05:44:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:48:46 2011] Not overwriting source region fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_src.reg
[Mon Sep 26 05:48:46 2011] Extracting stamp from image fullrun_ccd2_acisf09426_pi14-548_cl_sm2.00.img.gz, (420, 781) - (578, 938)
[Mon Sep 26 05:48:46 2011] Writing fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3.gif
[Mon Sep 26 05:48:53 2011] ../../acisf09426/products/events/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_src.evt and ../../acisf09426/products/events/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Sep 26 05:48:53 2011] Size of ../../acisf09426/products/events/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_src.evt.gz[events] = 123 counts
[Mon Sep 26 05:48:53 2011] Mean chipx,y = (766.63, 524.67)
[Mon Sep 26 05:48:53 2011] Mean tdetx,y = (3585.67, 3319.37)
[Mon Sep 26 05:48:53 2011] chipx,y range = (742.00-793.00, 498.00-551.00)
[Mon Sep 26 05:48:53 2011] Size of ../../acisf09426/products/events/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 286 counts
[Mon Sep 26 05:48:53 2011] ../../acisf09426/products/images/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_src.img and ../../acisf09426/products/images/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Sep 26 05:48:53 2011] ../../acisf09426/products/spectra/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_src.pi and ../../acisf09426/products/spectra/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Sep 26 05:48:53 2011] Not generating rmf since there are only 90 counts
[Mon Sep 26 05:48:57 2011] ../../acisf09426/products/lightcurves/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_src.lc and ../../acisf09426/products/lightcurves/fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Sep 26 05:50:55 2011] 162.597
[Mon Sep 26 05:53:08 2011] Updating aperture counts using extracted products
[Mon Sep 26 05:53:08 2011] Error reading totcts from fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Sep 26 05:53:08 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 05:53:08 2011] Using photon index=1.80, rate=0.000815, arf fullrun_ccd2_acisf09426_pi14-548_pass1_cl_src3.arf
[Mon Sep 26 05:53:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 05:53:08 2011] Updating source flux to 1.1e-14
[Mon Sep 26 05:53:48 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting