[Mon Sep 26 05:40:37 2011] Detection parameters:
  Position = (901.0, 980.7) = 4 54 2.61 2 48 35.2
  Extent = 1.1" x 0.7", rotation angle = 158 degrees
  Source counts = 21.2 +/- 5.1
  Background counts = 4.8
  Rate = 0.0002 +/- 5e-05

[Mon Sep 26 05:40:37 2011] Off-axis axis estimate = 5.36'
[Mon Sep 26 05:42:16 2011] Using EEF radius (= 1.33 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:42:16 2011] Initial guess for spatial extent in simple fitting = 1.33"
[Mon Sep 26 05:42:16 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.875
[Mon Sep 26 05:42:16 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 1.33"
[Mon Sep 26 05:42:20 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src26.ximg exists
[Mon Sep 26 05:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src26.csv
[Mon Sep 26 05:42:20 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src26_1.ximg exists
[Mon Sep 26 05:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src26.csv
[Mon Sep 26 05:42:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:42:21 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Mon Sep 26 05:42:21 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Sep 26 05:42:21 2011] Fit fullrun_ccd0_acisf09426_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Mon Sep 26 05:43:16 2011] Spatial fit model total counts = 40.607700, observed total counts = 40.000000
[Mon Sep 26 05:43:16 2011] Offset between fit and detection position for source 37 = 0.952543 pixels
[Mon Sep 26 05:43:16 2011] 41.069300 total counts/ 13.339600 bgd. counts: snr = 7.592307
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.952543 pixels
  Position = (901.9, 980.8) = 4 54 2.60 2 48 35.0
  Extent = 1.4 (0.9-1.8)", rotation angle = 0
  Source counts = 27.7 +/- 6.4
  Background counts = 13.3
  Rate = 0.0003 +/- 6e-05
[Mon Sep 26 05:43:16 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:43:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:43:16 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:43:16 2011] Source does appear to be extended
[Mon Sep 26 05:43:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:44:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:44:01 2011] Initial guess for spatial extent in simple fitting = 1.40"
[Mon Sep 26 05:44:01 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Mon Sep 26 05:44:01 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 1.40"
[Mon Sep 26 05:44:03 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src26.ximg exists
[Mon Sep 26 05:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src26.csv
[Mon Sep 26 05:44:03 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src26_1.ximg exists
[Mon Sep 26 05:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src26.csv
[Mon Sep 26 05:44:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:44:03 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Mon Sep 26 05:44:03 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Sep 26 05:44:03 2011] Fit fullrun_ccd0_acisf09426_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Sep 26 05:44:20 2011] Spatial fit model total counts = 44.937900, observed total counts = 44.000000
[Mon Sep 26 05:44:20 2011] Offset between fit and detection position for source 37 = 0.113721 pixels
[Mon Sep 26 05:44:20 2011] 45.760200 total counts/ 19.646000 bgd. counts: snr = 5.891687
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.113721 pixels
  Position = (901.8, 980.9) = 4 54 2.60 2 48 35.0
  Extent = 1.4 (0.7-1.8)", rotation angle = 0
  Source counts = 26.1 +/- 6.8
  Background counts = 19.6
  Rate = 0.0002 +/- 6e-05
[Mon Sep 26 05:44:20 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:44:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:44:20 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:44:20 2011] Source does appear to be extended
[Mon Sep 26 05:44:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:44:59 2011] Not overwriting source region fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_src.reg
[Mon Sep 26 05:44:59 2011] Extracting stamp from image fullrun_ccd0_acisf09426_pi14-548_cl_sm2.00.img.gz, (840, 919) - (964, 1043)
[Mon Sep 26 05:44:59 2011] Writing fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37.gif
[Mon Sep 26 05:46:52 2011] ../../acisf09426/products/events/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_src.evt and ../../acisf09426/products/events/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_bgd.evt exist, delete to re-create
[Mon Sep 26 05:46:52 2011] Size of ../../acisf09426/products/events/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_src.evt.gz[events] = 36 counts
[Mon Sep 26 05:46:52 2011] Mean chipx,y = (492.06, 846.19)
[Mon Sep 26 05:46:52 2011] Mean tdetx,y = (3907.19, 4639.94)
[Mon Sep 26 05:46:52 2011] chipx,y range = (465.00-509.00, 828.00-870.00)
[Mon Sep 26 05:46:52 2011] Size of ../../acisf09426/products/events/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_bgd.evt.gz[events] = 159 counts
[Mon Sep 26 05:46:52 2011] ../../acisf09426/products/images/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_src.img and ../../acisf09426/products/images/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_bgd.img exist, delete to re-create
[Mon Sep 26 05:46:52 2011] ../../acisf09426/products/spectra/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_src.pi and ../../acisf09426/products/spectra/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_bgd.pi exist, delete to re-create
[Mon Sep 26 05:46:52 2011] Not generating rmf since there are only 26 counts
[Mon Sep 26 05:46:56 2011] ../../acisf09426/products/lightcurves/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_src.lc and ../../acisf09426/products/lightcurves/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_bgd.lc exist, delete to re-create
[Mon Sep 26 05:47:21 2011] 181.524
[Mon Sep 26 05:53:07 2011] Updating aperture counts using extracted products
[Mon Sep 26 05:53:07 2011] Error reading totcts from fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37_src.pi.gz
[Mon Sep 26 05:53:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 05:53:07 2011] Using photon index=1.80, rate=0.000236, arf fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src37.arf
[Mon Sep 26 05:53:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 05:53:07 2011] Updating source flux to 2.9e-15
[Mon Sep 26 05:53:15 2011] Source 37 has fewer than 100.000000 counts, skipping spectral fitting