[Mon Sep 26 05:40:37 2011] Detection parameters:
  Position = (434.9, 885.2) = 4 54 17.92 2 47 48.2
  Extent = 1.2" x 0.5", rotation angle = 112 degrees
  Source counts = 17.1 +/- 4.6
  Background counts = 3.9
  Rate = 0.0002 +/- 4e-05

[Mon Sep 26 05:40:37 2011] Off-axis axis estimate = 4.86'
[Mon Sep 26 05:42:16 2011] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:42:16 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Mon Sep 26 05:42:16 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.157
[Mon Sep 26 05:42:16 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 1.13"
[Mon Sep 26 05:42:19 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src22.ximg exists
[Mon Sep 26 05:42:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src22.csv
[Mon Sep 26 05:42:19 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src22_1.ximg exists
[Mon Sep 26 05:42:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src22.csv
[Mon Sep 26 05:42:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09426_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:42:21 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Mon Sep 26 05:42:21 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Sep 26 05:42:21 2011] Fit fullrun_ccd0_acisf09426_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Mon Sep 26 05:43:16 2011] Spatial fit model total counts = 32.856100, observed total counts = 33.000000
[Mon Sep 26 05:43:16 2011] Offset between fit and detection position for source 33 = 1.535739 pixels
[Mon Sep 26 05:43:16 2011] 32.894800 total counts/ 19.559900 bgd. counts: snr = 3.015133
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 1.535739 pixels
  Position = (435.3, 886.7) = 4 54 17.92 2 47 48.7
  Extent = 0.8 (0.3-1.6)", rotation angle = 0
  Source counts = 13.3 +/- 5.7
  Background counts = 19.6
  Rate = 0.0001 +/- 5e-05
[Mon Sep 26 05:43:16 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:43:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:43:16 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:43:16 2011] Source does appear to be extended
[Mon Sep 26 05:43:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:44:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:44:01 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Mon Sep 26 05:44:01 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.265
[Mon Sep 26 05:44:01 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 0.85"
[Mon Sep 26 05:44:02 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src22.ximg exists
[Mon Sep 26 05:44:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src22.csv
[Mon Sep 26 05:44:02 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src22_1.ximg exists
[Mon Sep 26 05:44:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src22.csv
[Mon Sep 26 05:44:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09426_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:44:03 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Mon Sep 26 05:44:03 2011] fullrun_ccd0_acisf09426_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Sep 26 05:44:03 2011] Fit fullrun_ccd0_acisf09426_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Mon Sep 26 05:44:20 2011] Spatial fit model total counts = 33.998100, observed total counts = 34.000000
[Mon Sep 26 05:44:20 2011] Offset between fit and detection position for source 33 = 0.048910 pixels
[Mon Sep 26 05:44:20 2011] 34.015100 total counts/ 21.100900 bgd. counts: snr = 2.811364
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.048910 pixels
  Position = (435.3, 886.7) = 4 54 17.92 2 47 48.7
  Extent = 0.8 (0.3-1.5)", rotation angle = 0
  Source counts = 12.9 +/- 5.8
  Background counts = 21.1
  Rate = 0.0001 +/- 5e-05
[Mon Sep 26 05:44:20 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:44:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:44:20 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:44:20 2011] Source does appear to be extended
[Mon Sep 26 05:44:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:44:59 2011] Not overwriting source region fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_src.reg
[Mon Sep 26 05:44:59 2011] Extracting stamp from image fullrun_ccd0_acisf09426_pi14-548_cl_sm2.00.img.gz, (398, 849) - (473, 924)
[Mon Sep 26 05:44:59 2011] Writing fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33.gif
[Mon Sep 26 05:46:28 2011] ../../acisf09426/products/events/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_src.evt and ../../acisf09426/products/events/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_bgd.evt exist, delete to re-create
[Mon Sep 26 05:46:28 2011] Size of ../../acisf09426/products/events/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_src.evt.gz[events] = 24 counts
[Mon Sep 26 05:46:28 2011] Mean chipx,y = (836.67, 526.92)
[Mon Sep 26 05:46:28 2011] Mean tdetx,y = (3587.92, 4295.33)
[Mon Sep 26 05:46:28 2011] chipx,y range = (821.00-855.00, 504.00-544.00)
[Mon Sep 26 05:46:29 2011] Size of ../../acisf09426/products/events/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 51 counts
[Mon Sep 26 05:46:29 2011] ../../acisf09426/products/images/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_src.img and ../../acisf09426/products/images/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_bgd.img exist, delete to re-create
[Mon Sep 26 05:46:29 2011] ../../acisf09426/products/spectra/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_src.pi and ../../acisf09426/products/spectra/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_bgd.pi exist, delete to re-create
[Mon Sep 26 05:46:29 2011] Not generating rmf since there are only 12 counts
[Mon Sep 26 05:46:35 2011] ../../acisf09426/products/lightcurves/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_src.lc and ../../acisf09426/products/lightcurves/fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_bgd.lc exist, delete to re-create
[Mon Sep 26 05:47:21 2011] 187.414
[Mon Sep 26 05:53:06 2011] Updating aperture counts using extracted products
[Mon Sep 26 05:53:06 2011] Error reading totcts from fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33_src.pi.gz
[Mon Sep 26 05:53:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 05:53:07 2011] Using photon index=1.80, rate=0.000117, arf fullrun_ccd0_acisf09426_pi14-548_pass1_cl_src33.arf
[Mon Sep 26 05:53:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 05:53:07 2011] Updating source flux to 1.4e-15
[Mon Sep 26 05:53:15 2011] Source 33 has fewer than 100.000000 counts, skipping spectral fitting