[Tue Oct  4 23:51:41 2011] Detection parameters:
  Position = (590.4, 309.5) = 4 54 21.01 2 49 3.3
  Extent = 2.9" x 2.0", rotation angle = 95 degrees
  Source counts = 780.0 +/- 29.6
  Background counts = 98.0
  Rate = 0.007 +/- 0.0003

[Tue Oct  4 23:51:41 2011] Off-axis axis estimate = 8.04'
[Tue Oct  4 23:56:00 2011] Using EEF radius (= 2.86 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:56:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 23:56:00 2011] Initial guess for spatial extent in simple fitting = 2.86"
[Tue Oct  4 23:56:00 2011] source mask rpix=5.8, npix_max = 159, mask sum = 169, frac = 1.059
[Tue Oct  4 23:56:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.86"
[Tue Oct  4 23:56:01 2011] fullrun_ccd2_acisf09424_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct  4 23:56:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09424_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 23:56:01 2011] fullrun_ccd2_acisf09424_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct  4 23:56:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09424_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 23:56:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09424_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09424_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 23:56:02 2011] fullrun_ccd2_acisf09424_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 23:56:02 2011] fullrun_ccd2_acisf09424_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 23:56:02 2011] Fit fullrun_ccd2_acisf09424_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 23:56:34 2011] Spatial fit model total counts = 899.997000, observed total counts = 900.000000
[Tue Oct  4 23:56:34 2011] Offset between fit and detection position for source 36 = 0.299991 pixels
[Tue Oct  4 23:56:34 2011] 900.522000 total counts/ 177.141000 bgd. counts: snr = 54.351002
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.299991 pixels
  Position = (590.7, 309.6) = 4 54 21.01 2 49 3.0
  Extent = 2.5 (2.4-2.7)", rotation angle = 0
  Source counts = 723.4 +/- 30.0
  Background counts = 177.1
  Rate = 0.007 +/- 0.0003
[Tue Oct  4 23:56:35 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 23:56:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 23:56:35 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 23:56:35 2011] Source does appear to be extended
[Tue Oct  4 23:56:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 23:57:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:57:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 23:57:23 2011] Initial guess for spatial extent in simple fitting = 2.53"
[Tue Oct  4 23:57:23 2011] source mask rpix=5.1, npix_max = 127, mask sum = 121, frac = 0.951
[Tue Oct  4 23:57:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.53"
[Tue Oct  4 23:57:24 2011] fullrun_ccd2_acisf09424_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct  4 23:57:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09424_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 23:57:24 2011] fullrun_ccd2_acisf09424_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct  4 23:57:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09424_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 23:57:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09424_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09424_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 23:57:25 2011] fullrun_ccd2_acisf09424_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 23:57:25 2011] fullrun_ccd2_acisf09424_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 23:57:25 2011] Fit fullrun_ccd2_acisf09424_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 23:57:50 2011] Spatial fit model total counts = 873.996000, observed total counts = 874.000000
[Tue Oct  4 23:57:50 2011] Offset between fit and detection position for source 36 = 0.043070 pixels
[Tue Oct  4 23:57:50 2011] 873.874000 total counts/ 171.403000 bgd. counts: snr = 53.656111
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.043070 pixels
  Position = (590.7, 309.6) = 4 54 21.01 2 49 3.1
  Extent = 2.4 (2.3-2.7)", rotation angle = 0
  Source counts = 702.5 +/- 29.6
  Background counts = 171.4
  Rate = 0.006 +/- 0.0003
[Tue Oct  4 23:57:50 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 23:57:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 23:57:50 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 23:57:50 2011] Source does appear to be extended
[Tue Oct  4 23:57:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 00:41:43 2011] Not overwriting source region fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_src.reg
[Wed Oct  5 00:41:43 2011] Extracting stamp from image fullrun_ccd2_acisf09424_pi14-548_cl_sm2.00.img.gz, (479, 198) - (703, 422)
[Wed Oct  5 00:41:43 2011] Writing fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36.gif
[Wed Oct  5 00:41:45 2011] ../../acisf09424/products/events/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_src.evt and ../../acisf09424/products/events/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Wed Oct  5 00:41:45 2011] Size of ../../acisf09424/products/events/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_src.evt.gz[events] = 845 counts
[Wed Oct  5 00:41:45 2011] Mean chipx,y = (344.14, 104.53)
[Wed Oct  5 00:41:45 2011] Mean tdetx,y = (3165.53, 3741.86)
[Wed Oct  5 00:41:45 2011] chipx,y range = (314.00-379.00, 74.00-138.00)
[Wed Oct  5 00:41:45 2011] Size of ../../acisf09424/products/events/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 494 counts
[Wed Oct  5 00:41:45 2011] ../../acisf09424/products/images/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_src.img and ../../acisf09424/products/images/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Wed Oct  5 00:41:45 2011] ../../acisf09424/products/spectra/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_src.pi and ../../acisf09424/products/spectra/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Wed Oct  5 00:42:04 2011] ../../acisf09424/products/lightcurves/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_src.lc and ../../acisf09424/products/lightcurves/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Wed Oct  5 00:56:38 2011] Keeping rmf generated by specextract
[Wed Oct  5 00:56:38 2011] 167.169
[Wed Oct  5 01:54:00 2011] Updating aperture counts using extracted products
[Wed Oct  5 01:54:00 2011] Error reading totcts from fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_src.pi.gz
[Wed Oct  5 01:54:01 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 01:54:01 2011] Using photon index=1.80, rate=0.00641, arf fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36.arf
[Wed Oct  5 01:54:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 01:54:01 2011] Updating source flux to 8.7e-14
[Wed Oct  5 01:55:11 2011] Reading fit data from acisf09424/analysis//spectral/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_pl.csv
[Wed Oct  5 01:55:11 2011] Spectral fit parameter nH value = 3.75059e+16
[Wed Oct  5 01:55:11 2011] Spectral fit parameter PhoIndex value = 1.80584
[Wed Oct  5 01:55:11 2011] Failed to get F(0.3-8.0) from acisf09424/analysis//spectral/fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 01:55:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 01:55:11 2011] Using Nh = 3.8e+16, photon index=1.81, rate=0.00641, arf fullrun_ccd2_acisf09424_pi14-548_pass1_cl_src36.arf
[Wed Oct  5 01:55:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 01:55:11 2011] Updating source flux to 9.2e-14