[Tue Oct  4 23:51:27 2011] Detection parameters:
  Position = (720.1, 1222.5) = 4 53 50.51 2 51 17.6
  Extent = 0.5" x 0.5", rotation angle = 120 degrees
  Source counts = 116.4 +/- 11.0
  Background counts = 5.6
  Rate = 0.001 +/- 0.0001

[Tue Oct  4 23:51:31 2011] Off-axis axis estimate = 2.52'
[Tue Oct  4 23:55:55 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:55:55 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Tue Oct  4 23:55:55 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.992
[Tue Oct  4 23:55:55 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.50"
[Tue Oct  4 23:55:57 2011] fullrun_ccd0_acisf09424_pi14-548_cl_pass0_src7.ximg exists
[Tue Oct  4 23:55:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf09424_pi14-548_cl_pass0_src7.csv
[Tue Oct  4 23:55:57 2011] fullrun_ccd0_acisf09424_pi14-548_cl_pass0_src7_1.ximg exists
[Tue Oct  4 23:55:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf09424_pi14-548_cl_pass0_src7.csv
[Tue Oct  4 23:55:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09424_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09424_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 23:55:57 2011] fullrun_ccd0_acisf09424_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Tue Oct  4 23:55:57 2011] fullrun_ccd0_acisf09424_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Oct  4 23:55:57 2011] Fit fullrun_ccd0_acisf09424_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Oct  4 23:56:24 2011] Spatial fit model total counts = 123.525000, observed total counts = 125.000000
[Tue Oct  4 23:56:24 2011] Offset between fit and detection position for source 7 = 0.688599 pixels
[Tue Oct  4 23:56:24 2011] 124.097500 total counts/ 15.967500 bgd. counts: snr = 27.059997
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.688599 pixels
  Position = (720.6, 1222.9) = 4 53 50.51 2 51 17.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 108.1 +/- 11.1
  Background counts = 16.0
  Rate = 0.001 +/- 0.0001
[Tue Oct  4 23:56:24 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 23:56:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 23:56:24 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 23:56:24 2011] Source does appear to be extended
[Tue Oct  4 23:56:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:57:19 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Tue Oct  4 23:57:19 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.997
[Tue Oct  4 23:57:19 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.49"
[Tue Oct  4 23:57:20 2011] fullrun_ccd0_acisf09424_pi14-548_cl_pass1_src7.ximg exists
[Tue Oct  4 23:57:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09424_pi14-548_cl_pass1_src7.csv
[Tue Oct  4 23:57:20 2011] fullrun_ccd0_acisf09424_pi14-548_cl_pass1_src7_1.ximg exists
[Tue Oct  4 23:57:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09424_pi14-548_cl_pass1_src7.csv
[Tue Oct  4 23:57:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09424_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09424_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 23:57:21 2011] fullrun_ccd0_acisf09424_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Tue Oct  4 23:57:21 2011] fullrun_ccd0_acisf09424_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Oct  4 23:57:21 2011] Fit fullrun_ccd0_acisf09424_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Oct  4 23:57:40 2011] Spatial fit model total counts = 123.526000, observed total counts = 125.000000
[Tue Oct  4 23:57:40 2011] Offset between fit and detection position for source 7 = 0.000029 pixels
[Tue Oct  4 23:57:40 2011] 124.099000 total counts/ 15.970000 bgd. counts: snr = 27.057628
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.000029 pixels
  Position = (720.6, 1222.9) = 4 53 50.51 2 51 17.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 108.1 +/- 11.1
  Background counts = 16.0
  Rate = 0.001 +/- 0.0001
[Tue Oct  4 23:57:40 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 23:57:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 23:57:40 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 23:57:40 2011] Source does appear to be extended
[Tue Oct  4 23:57:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 23:58:34 2011] Not overwriting source region fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_src.reg
[Tue Oct  4 23:58:34 2011] Extracting stamp from image fullrun_ccd0_acisf09424_pi14-548_cl_sm2.00.img.gz, (698, 1200) - (743, 1245)
[Tue Oct  4 23:58:34 2011] Writing fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7.gif
[Wed Oct  5 00:08:40 2011] ../../acisf09424/products/events/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_src.evt and ../../acisf09424/products/events/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Oct  5 00:08:40 2011] Size of ../../acisf09424/products/events/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_src.evt.gz[events] = 114 counts
[Wed Oct  5 00:08:40 2011] Mean chipx,y = (845.55, 906.02)
[Wed Oct  5 00:08:40 2011] Mean tdetx,y = (3967.02, 4286.45)
[Wed Oct  5 00:08:40 2011] chipx,y range = (825.00-863.00, 889.00-924.00)
[Wed Oct  5 00:08:40 2011] Size of ../../acisf09424/products/events/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 28 counts
[Wed Oct  5 00:08:40 2011] ../../acisf09424/products/images/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_src.img and ../../acisf09424/products/images/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Oct  5 00:08:40 2011] ../../acisf09424/products/spectra/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_src.pi and ../../acisf09424/products/spectra/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Oct  5 00:09:46 2011] ../../acisf09424/products/lightcurves/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_src.lc and ../../acisf09424/products/lightcurves/fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Oct  5 00:30:30 2011] Keeping rmf generated by specextract
[Wed Oct  5 00:30:30 2011] 200.172
[Wed Oct  5 01:53:54 2011] Updating aperture counts using extracted products
[Wed Oct  5 01:53:55 2011] Error reading totcts from fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7_src.pi.gz
[Wed Oct  5 01:53:57 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 01:53:57 2011] Using photon index=1.80, rate=0.000986, arf fullrun_ccd0_acisf09424_pi14-548_pass1_cl_src7.arf
[Wed Oct  5 01:53:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 01:53:57 2011] Updating source flux to 1.1e-14