[Sun Sep 25 09:07:03 2011] Detection parameters:
  Position = (269.2, 849.8) = 16 24 19.11 41 15 5.0
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 53.5 +/- 7.5
  Background counts = 2.5
  Rate = 0.003 +/- 0.0004

[Sun Sep 25 09:07:05 2011] Off-axis axis estimate = 1.83'
[Sun Sep 25 09:07:44 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:07:44 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sun Sep 25 09:07:44 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.248
[Sun Sep 25 09:07:44 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.41"
[Sun Sep 25 09:07:44 2011] fullrun_ccd3_acisf09422_pi14-548_cl_pass0_src3.ximg exists
[Sun Sep 25 09:07:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09422_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 09:07:44 2011] fullrun_ccd3_acisf09422_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Sep 25 09:07:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09422_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 09:07:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09422_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09422_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:07:44 2011] fullrun_ccd3_acisf09422_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Sep 25 09:07:44 2011] fullrun_ccd3_acisf09422_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Sep 25 09:07:44 2011] Fit fullrun_ccd3_acisf09422_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Sep 25 09:07:52 2011] Spatial fit model total counts = 63.000000, observed total counts = 63.000000
[Sun Sep 25 09:07:52 2011] Offset between fit and detection position for source 2 = 0.763929 pixels
[Sun Sep 25 09:07:52 2011] 62.622440 total counts/ 8.843040 bgd. counts: snr = 18.084860
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.763929 pixels
  Position = (269.7, 850.4) = 16 24 19.11 41 15 5.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 53.8 +/- 7.9
  Background counts = 8.8
  Rate = 0.003 +/- 0.0004
[Sun Sep 25 09:07:52 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:07:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:07:52 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:07:52 2011] Source does appear to be extended
[Sun Sep 25 09:07:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:08:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:08:08 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sun Sep 25 09:08:08 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.141
[Sun Sep 25 09:08:08 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.45"
[Sun Sep 25 09:08:08 2011] fullrun_ccd3_acisf09422_pi14-548_cl_pass1_src3.ximg exists
[Sun Sep 25 09:08:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09422_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 09:08:08 2011] fullrun_ccd3_acisf09422_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Sep 25 09:08:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09422_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 09:08:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09422_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09422_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:08:09 2011] fullrun_ccd3_acisf09422_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Sep 25 09:08:09 2011] fullrun_ccd3_acisf09422_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Sep 25 09:08:09 2011] Fit fullrun_ccd3_acisf09422_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Sep 25 09:08:20 2011] Spatial fit model total counts = 62.997200, observed total counts = 63.000000
[Sun Sep 25 09:08:20 2011] Offset between fit and detection position for source 2 = 0.001532 pixels
[Sun Sep 25 09:08:20 2011] 62.619000 total counts/ 8.831300 bgd. counts: snr = 18.099670
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001532 pixels
  Position = (269.7, 850.4) = 16 24 19.11 41 15 5.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 53.8 +/- 7.9
  Background counts = 8.8
  Rate = 0.003 +/- 0.0004
[Sun Sep 25 09:08:20 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:08:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:08:20 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:08:20 2011] Source does appear to be extended
[Sun Sep 25 09:08:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:09:57 2011] Not overwriting source region fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_src.reg
[Sun Sep 25 09:09:57 2011] Extracting stamp from image fullrun_ccd3_acisf09422_pi14-548_cl_sm2.00.img.gz, (249, 830) - (290, 871)
[Sun Sep 25 09:09:57 2011] Writing fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2.gif
[Sun Sep 25 09:10:03 2011] ../../acisf09422/products/events/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_src.evt and ../../acisf09422/products/events/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Sep 25 09:10:03 2011] Size of ../../acisf09422/products/events/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_src.evt.gz[events] = 55 counts
[Sun Sep 25 09:10:03 2011] Mean chipx,y = (796.78, 820.09)
[Sun Sep 25 09:10:03 2011] Mean tdetx,y = (4311.91, 3857.78)
[Sun Sep 25 09:10:03 2011] chipx,y range = (777.00-812.00, 802.00-837.00)
[Sun Sep 25 09:10:03 2011] Size of ../../acisf09422/products/events/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 19 counts
[Sun Sep 25 09:10:03 2011] ../../acisf09422/products/images/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_src.img and ../../acisf09422/products/images/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Sep 25 09:10:03 2011] ../../acisf09422/products/spectra/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_src.pi and ../../acisf09422/products/spectra/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Sep 25 09:10:03 2011] Not generating rmf since there are only 53 counts
[Sun Sep 25 09:10:06 2011] ../../acisf09422/products/lightcurves/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_src.lc and ../../acisf09422/products/lightcurves/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Sep 25 09:10:33 2011] 202.886
[Sun Sep 25 09:10:35 2011] Updating aperture counts using extracted products
[Sun Sep 25 09:10:35 2011] Error reading totcts from fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Sep 25 09:10:35 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 09:10:35 2011] Using photon index=1.80, rate=0.00294, arf fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2.arf
[Sun Sep 25 09:10:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 09:10:35 2011] Updating source flux to 3.5e-14
[Sun Sep 25 09:10:40 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep 25 09:10:41 2011] acisf09422/analysis//spectral/fullrun_ccd3_acisf09422_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete