[Sun Sep 25 09:07:03 2011] Detection parameters:
  Position = (479.6, 108.0) = 16 24 15.56 41 17 27.8
  Extent = 0.5" x 0.5", rotation angle = 12 degrees
  Source counts = 27.5 +/- 5.3
  Background counts = 0.5
  Rate = 0.002 +/- 0.0003

[Sun Sep 25 09:07:03 2011] Off-axis axis estimate = 0.64'
[Sun Sep 25 09:07:43 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:07:43 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Sep 25 09:07:43 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.908
[Sun Sep 25 09:07:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Sun Sep 25 09:07:43 2011] fullrun_ccd2_acisf09422_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 09:07:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09422_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 09:07:43 2011] fullrun_ccd2_acisf09422_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 09:07:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09422_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 09:07:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09422_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09422_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:07:43 2011] fullrun_ccd2_acisf09422_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 09:07:43 2011] fullrun_ccd2_acisf09422_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 09:07:43 2011] Fit fullrun_ccd2_acisf09422_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 09:07:50 2011] Spatial fit model total counts = 27.144200, observed total counts = 28.000000
[Sun Sep 25 09:07:50 2011] Offset between fit and detection position for source 13 = 0.703325 pixels
[Sun Sep 25 09:07:50 2011] 26.978969 total counts/ 0.717469 bgd. counts: snr = 31.004016
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.703325 pixels
  Position = (480.1, 108.5) = 16 24 15.56 41 17 27.8
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 26.3 +/- 5.2
  Background counts = 0.7
  Rate = 0.001 +/- 0.0003
[Sun Sep 25 09:07:50 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:07:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:07:50 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:07:50 2011] Source does appear to be extended
[Sun Sep 25 09:07:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:08:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:08:07 2011] Initial guess for spatial extent in simple fitting = 0.35"
[Sun Sep 25 09:08:07 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.020
[Sun Sep 25 09:08:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.35"
[Sun Sep 25 09:08:08 2011] fullrun_ccd2_acisf09422_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 09:08:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09422_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 09:08:08 2011] fullrun_ccd2_acisf09422_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 09:08:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09422_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 09:08:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09422_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09422_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:08:08 2011] fullrun_ccd2_acisf09422_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 09:08:08 2011] fullrun_ccd2_acisf09422_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 09:08:08 2011] Fit fullrun_ccd2_acisf09422_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 09:08:19 2011] Spatial fit model total counts = 26.974400, observed total counts = 28.000000
[Sun Sep 25 09:08:19 2011] Offset between fit and detection position for source 13 = 0.005393 pixels
[Sun Sep 25 09:08:19 2011] 26.703298 total counts/ 0.337898 bgd. counts: snr = 45.356711
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.005393 pixels
  Position = (480.1, 108.5) = 16 24 15.56 41 17 27.8
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 26.4 +/- 5.2
  Background counts = 0.3
  Rate = 0.001 +/- 0.0003
[Sun Sep 25 09:08:19 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:08:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:08:19 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:08:19 2011] Source does appear to be extended
[Sun Sep 25 09:08:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:09:19 2011] Not overwriting source region fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_src.reg
[Sun Sep 25 09:09:19 2011] Extracting stamp from image fullrun_ccd2_acisf09422_pi14-548_cl_sm2.00.img.gz, (464, 92) - (496, 125)
[Sun Sep 25 09:09:19 2011] Writing fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13.gif
[Sun Sep 25 09:09:20 2011] ../../acisf09422/products/events/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_src.evt and ../../acisf09422/products/events/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Sep 25 09:09:20 2011] Size of ../../acisf09422/products/events/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_src.evt.gz[events] = 27 counts
[Sun Sep 25 09:09:20 2011] Mean chipx,y = (352.81, 977.93)
[Sun Sep 25 09:09:20 2011] Mean tdetx,y = (4038.93, 3733.19)
[Sun Sep 25 09:09:20 2011] chipx,y range = (336.00-368.00, 959.00-992.00)
[Sun Sep 25 09:09:20 2011] Size of ../../acisf09422/products/events/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 2 counts
[Sun Sep 25 09:09:20 2011] ../../acisf09422/products/images/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_src.img and ../../acisf09422/products/images/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Sep 25 09:09:20 2011] ../../acisf09422/products/spectra/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_src.pi and ../../acisf09422/products/spectra/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Sep 25 09:09:20 2011] Not generating rmf since there are only 26 counts
[Sun Sep 25 09:09:23 2011] ../../acisf09422/products/lightcurves/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_src.lc and ../../acisf09422/products/lightcurves/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Sep 25 09:09:56 2011] 200.277
[Sun Sep 25 09:10:35 2011] Updating aperture counts using extracted products
[Sun Sep 25 09:10:35 2011] Error reading totcts from fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_src.pi.gz
[Sun Sep 25 09:10:35 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 09:10:35 2011] Using photon index=1.80, rate=0.00144, arf fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13.arf
[Sun Sep 25 09:10:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 09:10:35 2011] Updating source flux to 1.7e-14
[Sun Sep 25 09:10:39 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep 25 09:10:40 2011] acisf09422/analysis//spectral/fullrun_ccd2_acisf09422_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete