[Sat Oct 15 22:33:00 2011] Detection parameters:
  Position = (423.2, 967.9) = 5 2 8.05 -4 8 12.8
  Extent = 3.5" x 3.2", rotation angle = 25 degrees
  Source counts = 199.7 +/- 16.2
  Background counts = 61.3
  Rate = 0.006 +/- 0.0005

[Sat Oct 15 22:33:01 2011] Off-axis axis estimate = 9.14'
[Sat Oct 15 22:33:52 2011] Using EEF radius (= 3.70 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 22:33:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 22:33:52 2011] Initial guess for spatial extent in simple fitting = 3.70"
[Sat Oct 15 22:33:52 2011] source mask rpix=7.5, npix_max = 256, mask sum = 256, frac = 0.997
[Sat Oct 15 22:33:52 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.70"
[Sat Oct 15 22:33:52 2011] fullrun_ccd6_acisf09405_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 22:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09405_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 22:33:52 2011] fullrun_ccd6_acisf09405_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 22:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09405_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 22:33:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09405_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09405_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 22:33:53 2011] fullrun_ccd6_acisf09405_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 22:33:53 2011] fullrun_ccd6_acisf09405_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 22:33:53 2011] Fit fullrun_ccd6_acisf09405_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 22:33:59 2011] Spatial fit model total counts = 264.999000, observed total counts = 265.000000
[Sat Oct 15 22:33:59 2011] Offset between fit and detection position for source 1 = 0.633764 pixels
[Sat Oct 15 22:33:59 2011] 265.102100 total counts/ 38.570100 bgd. counts: snr = 36.475745
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.633764 pixels
  Position = (423.3, 968.5) = 5 2 8.07 -4 8 12.7
  Extent = 5.1 (4.5-5.8)", rotation angle = 0
  Source counts = 226.5 +/- 16.3
  Background counts = 38.6
  Rate = 0.006 +/- 0.0005
[Sat Oct 15 22:33:59 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 22:33:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 22:33:59 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 22:33:59 2011] Source does appear to be extended
[Sat Oct 15 22:33:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 22:34:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 22:34:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 22:34:23 2011] Initial guess for spatial extent in simple fitting = 5.14"
[Sat Oct 15 22:34:23 2011] source mask rpix=10.5, npix_max = 480, mask sum = 462, frac = 0.962
[Sat Oct 15 22:34:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.14"
[Sat Oct 15 22:34:23 2011] fullrun_ccd6_acisf09405_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 22:34:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09405_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 22:34:23 2011] fullrun_ccd6_acisf09405_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 22:34:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09405_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 22:34:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09405_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09405_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 22:34:23 2011] fullrun_ccd6_acisf09405_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 22:34:23 2011] fullrun_ccd6_acisf09405_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 22:34:23 2011] Fit fullrun_ccd6_acisf09405_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 22:34:30 2011] Spatial fit model total counts = 310.999000, observed total counts = 311.000000
[Sat Oct 15 22:34:30 2011] Offset between fit and detection position for source 1 = 0.598007 pixels
[Sat Oct 15 22:34:30 2011] 310.777000 total counts/ 87.064000 bgd. counts: snr = 23.975734
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.598007 pixels
  Position = (423.8, 968.3) = 5 2 8.05 -4 8 12.8
  Extent = 5.1 (4.5-5.6)", rotation angle = 0
  Source counts = 223.7 +/- 17.6
  Background counts = 87.1
  Rate = 0.006 +/- 0.0005
[Sat Oct 15 22:34:30 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 22:34:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 22:34:30 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 22:34:30 2011] Source does appear to be extended
[Sat Oct 15 22:34:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 22:36:52 2011] Not overwriting source region fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 22:36:52 2011] Extracting stamp from image fullrun_ccd6_acisf09405_pi14-548_cl_sm2.00.img.gz, (190, 735) - (657, 1202)
[Sat Oct 15 22:36:52 2011] Writing fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 22:36:53 2011] ../../acisf09405/products/events/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_src.evt and ../../acisf09405/products/events/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 22:36:54 2011] Size of ../../acisf09405/products/events/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_src.evt.gz[events] = 287 counts
[Sat Oct 15 22:36:54 2011] Mean chipx,y = (121.15, 549.70)
[Sat Oct 15 22:36:54 2011] Mean tdetx,y = (2996.15, 2251.70)
[Sat Oct 15 22:36:54 2011] chipx,y range = (79.00-170.00, 502.00-603.00)
[Sat Oct 15 22:36:54 2011] Size of ../../acisf09405/products/events/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 651 counts
[Sat Oct 15 22:36:54 2011] ../../acisf09405/products/images/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_src.img and ../../acisf09405/products/images/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 22:36:54 2011] rmf not found, will run specextract
[Sat Oct 15 22:36:54 2011] arf not found, will run specextract
[Sat Oct 15 22:37:21 2011] ../../acisf09405/products/spectra/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1.warf not found
[Sat Oct 15 22:37:21 2011] ../../acisf09405/products/spectra/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1.wrmf not found
[Sat Oct 15 22:37:21 2011] Removal of ../../acisf09405/products/spectra/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1.soff failed
[Sat Oct 15 22:37:27 2011] ../../acisf09405/products/lightcurves/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_src.lc and ../../acisf09405/products/lightcurves/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 22:42:38 2011] Keeping rmf generated by specextract
[Sat Oct 15 22:42:38 2011] 170.097
[Sat Oct 15 22:49:48 2011] Updating aperture counts using extracted products
[Sat Oct 15 22:49:48 2011] Error reading totcts from fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 22:49:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 22:49:48 2011] Using photon index=1.80, rate=0.00629, arf fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 22:49:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 22:49:48 2011] Updating source flux to 7.6e-14
[Sat Oct 15 22:50:09 2011] Reading fit data from acisf09405/analysis//spectral/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 15 22:50:09 2011] Spectral fit parameter nH value = 1.99217e+22
[Sat Oct 15 22:50:09 2011] Spectral fit parameter PhoIndex value = 1.56462
[Sat Oct 15 22:50:09 2011] Failed to get F(0.3-8.0) from acisf09405/analysis//spectral/fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 22:50:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 22:50:09 2011] Using Nh = 2e+22, photon index=1.56, rate=0.00629, arf fullrun_ccd6_acisf09405_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 22:50:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 22:50:09 2011] Updating source flux to 1.4e-13