[Sat Oct 15 16:42:21 2011] Detection parameters:
  Position = (784.1, 595.4) = 10 24 15.53 -27 13 48.0
  Extent = 0.5" x 0.5", rotation angle = 159 degrees
  Source counts = 18.3 +/- 4.4
  Background counts = 0.7
  Rate = 0.0005 +/- 0.0001

[Sat Oct 15 16:42:22 2011] Off-axis axis estimate = 4.62'
[Sat Oct 15 16:43:23 2011] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 16:43:23 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Sat Oct 15 16:43:23 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.924
[Sat Oct 15 16:43:23 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.03"
[Sat Oct 15 16:43:23 2011] fullrun_ccd6_acisf09400_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 15 16:43:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09400_pi14-548_cl_pass0_src10.csv
[Sat Oct 15 16:43:23 2011] fullrun_ccd6_acisf09400_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 15 16:43:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09400_pi14-548_cl_pass0_src10.csv
[Sat Oct 15 16:43:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09400_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09400_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 16:43:24 2011] fullrun_ccd6_acisf09400_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 15 16:43:24 2011] fullrun_ccd6_acisf09400_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 15 16:43:24 2011] Fit fullrun_ccd6_acisf09400_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 15 16:43:31 2011] Spatial fit model total counts = 43.472100, observed total counts = 45.000000
[Sat Oct 15 16:43:31 2011] Offset between fit and detection position for source 8 = 2.450002 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.450002 pixels
  Position = (782.0, 594.2) = 10 24 15.63 -27 13 48.9
  Extent = 1.3 (0.9-1.6)", rotation angle = 0
  Source counts = 43.8 +/- 6.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Oct 15 16:43:31 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 16:43:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 16:43:31 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 16:43:31 2011] Source does appear to be extended
[Sat Oct 15 16:43:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 16:43:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 16:43:49 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Sat Oct 15 16:43:49 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Sat Oct 15 16:43:49 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.34"
[Sat Oct 15 16:43:50 2011] fullrun_ccd6_acisf09400_pi14-548_cl_pass1_src10.ximg exists
[Sat Oct 15 16:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09400_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 16:43:50 2011] fullrun_ccd6_acisf09400_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Oct 15 16:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09400_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 16:43:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09400_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09400_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 16:43:50 2011] fullrun_ccd6_acisf09400_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Oct 15 16:43:50 2011] fullrun_ccd6_acisf09400_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Oct 15 16:43:50 2011] Fit fullrun_ccd6_acisf09400_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Oct 15 16:43:56 2011] Spatial fit model total counts = 45.250300, observed total counts = 49.000000
[Sat Oct 15 16:43:56 2011] Offset between fit and detection position for source 8 = 0.985647 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.985647 pixels
  Position = (782.7, 594.9) = 10 24 15.61 -27 13 48.5
  Extent = 1.2 (1.0-1.3)", rotation angle = 0
  Source counts = 42.6 +/- 6.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Oct 15 16:43:56 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 16:43:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 16:43:56 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 16:43:56 2011] Source does appear to be extended
[Sat Oct 15 16:43:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 16:48:30 2011] Not overwriting source region fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_src.reg
[Sat Oct 15 16:48:30 2011] Extracting stamp from image fullrun_ccd6_acisf09400_pi14-548_cl_sm2.00.img.gz, (727, 539) - (838, 650)
[Sat Oct 15 16:48:30 2011] Writing fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8.gif
[Sat Oct 15 16:53:27 2011] ../../acisf09400/products/events/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_src.evt and ../../acisf09400/products/events/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sat Oct 15 16:53:27 2011] Size of ../../acisf09400/products/events/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_src.evt.gz[events] = 49 counts
[Sat Oct 15 16:53:27 2011] Mean chipx,y = (669.16, 515.53)
[Sat Oct 15 16:53:27 2011] Mean tdetx,y = (3544.16, 2217.53)
[Sat Oct 15 16:53:27 2011] chipx,y range = (650.00-688.00, 495.00-531.00)
[Sat Oct 15 16:53:27 2011] Size of ../../acisf09400/products/events/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 35 counts
[Sat Oct 15 16:53:27 2011] ../../acisf09400/products/images/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_src.img and ../../acisf09400/products/images/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Sat Oct 15 16:53:27 2011] Not generating rmf since there are only 42 counts
[Sat Oct 15 16:53:27 2011] arf not found, will run specextract
[Sat Oct 15 16:53:53 2011] ../../acisf09400/products/spectra/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8.warf not found
[Sat Oct 15 16:53:53 2011] ../../acisf09400/products/spectra/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8.wrmf not found
[Sat Oct 15 16:53:53 2011] Removal of ../../acisf09400/products/spectra/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8.soff failed
[Sat Oct 15 16:53:59 2011] ../../acisf09400/products/lightcurves/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_src.lc and ../../acisf09400/products/lightcurves/fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sat Oct 15 16:57:02 2011] Spectrum 8 has only 43 counts, deleting rmf
[Sat Oct 15 16:57:02 2011] 190.413
[Sat Oct 15 16:57:45 2011] Updating aperture counts using extracted products
[Sat Oct 15 16:57:45 2011] Error reading totcts from fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8_src.pi.gz
[Sat Oct 15 16:57:45 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 16:57:45 2011] Using photon index=1.80, rate=0.00116, arf fullrun_ccd6_acisf09400_pi14-548_pass1_cl_src8.arf
[Sat Oct 15 16:57:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 16:57:45 2011] Updating source flux to 1.3e-14
[Sat Oct 15 16:57:55 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting