[Fri Oct 14 14:26:51 2011] Detection parameters:
  Position = (383.0, 710.4) = 3 34 23.62 -39 1 32.2
  Extent = 1.3" x 0.8", rotation angle = 102 degrees
  Source counts = 54.3 +/- 7.5
  Background counts = 2.7
  Rate = 0.003 +/- 0.0005

[Fri Oct 14 14:26:53 2011] Off-axis axis estimate = 6.15'
[Fri Oct 14 14:27:34 2011] Using EEF radius (= 1.71 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 14:27:34 2011] Initial guess for spatial extent in simple fitting = 1.71"
[Fri Oct 14 14:27:34 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.014
[Fri Oct 14 14:27:34 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.71"
[Fri Oct 14 14:27:35 2011] fullrun_ccd3_acisf09393_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 14 14:27:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09393_pi14-548_cl_pass0_src3.csv
[Fri Oct 14 14:27:35 2011] fullrun_ccd3_acisf09393_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 14 14:27:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09393_pi14-548_cl_pass0_src3.csv
[Fri Oct 14 14:27:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09393_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09393_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 14:27:37 2011] fullrun_ccd3_acisf09393_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 14 14:27:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09393_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Oct 14 14:27:37 2011] fullrun_ccd3_acisf09393_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 14 14:27:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09393_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Oct 14 14:27:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09393_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09393_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 14:27:47 2011] Spatial fit model total counts = 47.554400, observed total counts = 57.000000
[Fri Oct 14 14:27:47 2011] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct 14 14:27:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 14:27:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 14:27:47 2011] Assessing source extent using major
[Fri Oct 14 14:27:47 2011] Source does appear to be extended
[Fri Oct 14 14:27:47 2011] Computing asymmetry using major and minor axis, asym = 1.75
[Fri Oct 14 14:27:47 2011] Source is asymmetric
[Fri Oct 14 14:28:04 2011] Using EEF radius (= 1.71 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 14:28:04 2011] Initial guess for spatial extent in simple fitting = 1.71"
[Fri Oct 14 14:28:04 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.014
[Fri Oct 14 14:28:04 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.71"
[Fri Oct 14 14:28:04 2011] fullrun_ccd3_acisf09393_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 14 14:28:04 2011] fullrun_ccd3_acisf09393_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 14 14:28:04 2011] Fit fullrun_ccd3_acisf09393_pi14-548_cl_pass1_src3 appears to have run properly
[Fri Oct 14 14:28:07 2011] fullrun_ccd3_acisf09393_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 14 14:28:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09393_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Oct 14 14:28:07 2011] fullrun_ccd3_acisf09393_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 14 14:28:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09393_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Oct 14 14:28:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09393_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09393_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 14:28:14 2011] Spatial fit model total counts = 52.390300, observed total counts = 57.000000
[Fri Oct 14 14:28:14 2011] Offset between fit and detection position for source 4 = 1.822809 pixels
[Fri Oct 14 14:28:14 2011] 53.862640 total counts/ 5.411040 bgd. counts: snr = 20.828968
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.822809 pixels
  Position = (383.6, 708.7) = 3 34 23.62 -39 1 33.3
  Extent = 1.1" x 0.8", rotation angle = 61
  Source counts = 48.5 +/- 7.3
  Background counts = 5.4
  Rate = 0.003 +/- 0.0005
[Fri Oct 14 14:28:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 14:28:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 14:28:14 2011] Assessing source extent using major
[Fri Oct 14 14:28:14 2011] Source does appear to be extended
[Fri Oct 14 14:28:14 2011] Computing asymmetry using major and minor axis, asym = 1.47
[Fri Oct 14 14:41:34 2011] Not overwriting source region fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 14 14:41:34 2011] Extracting stamp from image fullrun_ccd3_acisf09393_pi14-548_cl_sm2.00.img.gz, (333, 658) - (434, 760)
[Fri Oct 14 14:41:34 2011] Writing fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4.gif
[Fri Oct 14 14:42:21 2011] ../../acisf09393/products/events/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_src.evt and ../../acisf09393/products/events/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 14 14:42:21 2011] Size of ../../acisf09393/products/events/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_src.evt.gz[events] = 49 counts
[Fri Oct 14 14:42:21 2011] Mean chipx,y = (578.41, 291.53)
[Fri Oct 14 14:42:21 2011] Mean tdetx,y = (4840.47, 3639.41)
[Fri Oct 14 14:42:21 2011] chipx,y range = (559.00-598.00, 270.00-310.00)
[Fri Oct 14 14:42:21 2011] Size of ../../acisf09393/products/events/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 16 counts
[Fri Oct 14 14:42:21 2011] ../../acisf09393/products/images/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_src.img and ../../acisf09393/products/images/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 14 14:42:21 2011] Not generating rmf since there are only 48 counts
[Fri Oct 14 14:42:21 2011] arf not found, will run specextract
[Fri Oct 14 14:42:46 2011] ../../acisf09393/products/spectra/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4.warf not found
[Fri Oct 14 14:42:46 2011] ../../acisf09393/products/spectra/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4.wrmf not found
[Fri Oct 14 14:42:46 2011] Removal of ../../acisf09393/products/spectra/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4.soff failed
[Fri Oct 14 14:42:52 2011] ../../acisf09393/products/lightcurves/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_src.lc and ../../acisf09393/products/lightcurves/fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 14 14:49:35 2011] Spectrum 4 has only 48 counts, deleting rmf
[Fri Oct 14 14:49:35 2011] 182.326
[Fri Oct 14 14:49:38 2011] Updating aperture counts using extracted products
[Fri Oct 14 14:49:38 2011] Error reading totcts from fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 14 14:49:38 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 14:49:38 2011] Using photon index=1.80, rate=0.00311, arf fullrun_ccd3_acisf09393_pi14-548_pass1_cl_src4.arf
[Fri Oct 14 14:49:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 14:49:38 2011] Updating source flux to 4.1e-14
[Fri Oct 14 14:49:43 2011] Flag p found in src. 4 procflags, skipping spectral fitting
[Fri Oct 14 14:49:43 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting