[Tue Oct  4 23:35:57 2011] Detection parameters:
  Position = (341.4, 563.3) = 11 16 7.33 1 35 12.4
  Extent = 0.5" x 0.5", rotation angle = 129 degrees
  Source counts = 889.8 +/- 30.3
  Background counts = 27.2
  Rate = 0.02 +/- 0.0008

[Tue Oct  4 23:35:59 2011] Off-axis axis estimate = 4.89'
[Tue Oct  4 23:39:21 2011] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:39:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 23:39:21 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Tue Oct  4 23:39:21 2011] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.603
[Tue Oct  4 23:39:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.13"
[Tue Oct  4 23:39:21 2011] fullrun_ccd2_acisf09375_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct  4 23:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09375_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 23:39:21 2011] fullrun_ccd2_acisf09375_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct  4 23:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09375_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 23:39:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09375_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09375_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 23:39:22 2011] fullrun_ccd2_acisf09375_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 23:39:22 2011] fullrun_ccd2_acisf09375_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 23:39:22 2011] Fit fullrun_ccd2_acisf09375_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 23:39:39 2011] Spatial fit model total counts = 1839.500000, observed total counts = 1830.000000
[Tue Oct  4 23:39:39 2011] Offset between fit and detection position for source 2 = 1.129568 pixels
[Tue Oct  4 23:39:39 2011] 1820.395000 total counts/ 133.965000 bgd. counts: snr = 145.704393
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.129568 pixels
  Position = (340.8, 562.4) = 11 16 7.36 1 35 11.7
  Extent = 1.4 (1.3-1.4)", rotation angle = 0
  Source counts = 1686.4 +/- 42.7
  Background counts = 134.0
  Rate = 0.04 +/- 0.001
[Tue Oct  4 23:39:39 2011] Spatial fit model total counts = 1731.730000, observed total counts = 1694.000000
[Tue Oct  4 23:39:39 2011] Offset between fit and detection position for source 2 = 0.150018 pixels
[Tue Oct  4 23:39:39 2011] Warning, changing simple spatial fit ID from 1 to 3
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.150018 pixels
  Position = (340.8, 562.3) = 11 16 7.36 1 35 11.6
  Extent = 1.4 (1.4-1.5)", rotation angle = 0
  Source counts = 1689.5 +/- 41.1
  Background counts = 0.0
  Rate = 0.04 +/- 0.001
[Tue Oct  4 23:39:39 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 23:39:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 23:39:39 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 23:39:39 2011] Source does appear to be extended
[Tue Oct  4 23:39:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 23:39:39 2011] Source is confused with source 5
[Tue Oct  4 23:40:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:40:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 23:40:13 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Tue Oct  4 23:40:13 2011] source mask rpix=2.9, npix_max = 47, mask sum = 27, frac = 0.573
[Tue Oct  4 23:40:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.44"
[Tue Oct  4 23:40:14 2011] fullrun_ccd2_acisf09375_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct  4 23:40:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09375_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 23:40:14 2011] fullrun_ccd2_acisf09375_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct  4 23:40:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09375_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 23:40:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09375_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09375_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 23:40:14 2011] fullrun_ccd2_acisf09375_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 23:40:14 2011] fullrun_ccd2_acisf09375_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 23:40:14 2011] Fit fullrun_ccd2_acisf09375_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 23:40:30 2011] Spatial fit model total counts = 1888.900000, observed total counts = 1878.000000
[Tue Oct  4 23:40:30 2011] Offset between fit and detection position for source 2 = 0.139450 pixels
[Tue Oct  4 23:40:30 2011] 1887.287800 total counts/ 45.807800 bgd. counts: snr = 272.080420
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.139450 pixels
  Position = (340.8, 562.1) = 11 16 7.36 1 35 11.5
  Extent = 1.5 (1.4-1.5)", rotation angle = 0
  Source counts = 1841.5 +/- 43.4
  Background counts = 45.8
  Rate = 0.05 +/- 0.001
[Tue Oct  4 23:40:30 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 23:40:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 23:40:30 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 23:40:30 2011] Source does appear to be extended
[Tue Oct  4 23:40:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 00:20:11 2011] Not overwriting source region fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_src.reg
[Wed Oct  5 00:20:11 2011] Extracting stamp from image fullrun_ccd2_acisf09375_pi14-548_cl_sm2.00.img.gz, (273, 494) - (409, 630)
[Wed Oct  5 00:20:11 2011] Writing fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2.gif
[Wed Oct  5 00:20:13 2011] ../../acisf09375/products/events/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_src.evt and ../../acisf09375/products/events/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct  5 00:20:13 2011] Size of ../../acisf09375/products/events/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_src.evt.gz[events] = 1872 counts
[Wed Oct  5 00:20:13 2011] Mean chipx,y = (138.15, 462.29)
[Wed Oct  5 00:20:13 2011] Mean tdetx,y = (3523.29, 3947.85)
[Wed Oct  5 00:20:13 2011] chipx,y range = (112.00-160.00, 437.00-488.00)
[Wed Oct  5 00:20:13 2011] Size of ../../acisf09375/products/events/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 58 counts
[Wed Oct  5 00:20:13 2011] ../../acisf09375/products/images/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_src.img and ../../acisf09375/products/images/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct  5 00:20:13 2011] ../../acisf09375/products/spectra/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_src.pi and ../../acisf09375/products/spectra/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct  5 00:21:12 2011] ../../acisf09375/products/lightcurves/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_src.lc and ../../acisf09375/products/lightcurves/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct  5 00:30:41 2011] Keeping rmf generated by specextract
[Wed Oct  5 00:30:41 2011] 191.974
[Wed Oct  5 00:38:27 2011] Updating aperture counts using extracted products
[Wed Oct  5 00:38:27 2011] Error reading totcts from fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct  5 00:38:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:38:28 2011] Using photon index=1.80, rate=0.0465, arf fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2.arf
[Wed Oct  5 00:38:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 00:38:28 2011] Updating source flux to 5.4e-13
[Wed Oct  5 00:38:59 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Oct  5 00:39:22 2011] Reading fit data from acisf09375/analysis//spectral/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_pl.csv
[Wed Oct  5 00:39:22 2011] Spectral fit parameter nH value = 6.27429e+21
[Wed Oct  5 00:39:22 2011] Spectral fit parameter PhoIndex value = 6.30178
[Wed Oct  5 00:39:22 2011] Failed to get F(0.3-8.0) from acisf09375/analysis//spectral/fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 00:39:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:39:22 2011] Using Nh = 6.3e+21, photon index=6.30, rate=0.0465, arf fullrun_ccd2_acisf09375_pi14-548_pass1_cl_src2.arf
[Wed Oct  5 00:39:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 00:39:22 2011] Updating source flux to 3.4e-13