[Tue Oct  4 23:35:49 2011] Detection parameters:
  Position = (337.2, 754.3) = 11 16 37.23 1 32 49.6
  Extent = 3.6" x 3.1", rotation angle = 143 degrees
  Source counts = 342.3 +/- 20.0
  Background counts = 58.7
  Rate = 0.009 +/- 0.0005

[Tue Oct  4 23:35:53 2011] Off-axis axis estimate = 10.54'
[Tue Oct  4 23:39:18 2011] Using EEF radius (= 4.93 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:39:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 23:39:18 2011] Initial guess for spatial extent in simple fitting = 4.93"
[Tue Oct  4 23:39:18 2011] source mask rpix=10.0, npix_max = 442, mask sum = 431, frac = 0.974
[Tue Oct  4 23:39:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.93"
[Tue Oct  4 23:39:18 2011] fullrun_ccd0_acisf09375_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct  4 23:39:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09375_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 23:39:18 2011] fullrun_ccd0_acisf09375_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct  4 23:39:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09375_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 23:39:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09375_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09375_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 23:39:18 2011] fullrun_ccd0_acisf09375_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 23:39:18 2011] fullrun_ccd0_acisf09375_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 23:39:18 2011] Fit fullrun_ccd0_acisf09375_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 23:39:32 2011] Spatial fit model total counts = 490.219000, observed total counts = 489.000000
[Tue Oct  4 23:39:32 2011] Offset between fit and detection position for source 1 = 0.499153 pixels
[Tue Oct  4 23:39:32 2011] 489.671800 total counts/ 64.550800 bgd. counts: snr = 52.912922
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.499153 pixels
  Position = (337.6, 754.7) = 11 16 37.23 1 32 49.6
  Extent = 4.7 (4.3-5.0)", rotation angle = 0
  Source counts = 425.1 +/- 22.1
  Background counts = 64.6
  Rate = 0.01 +/- 0.0006
[Tue Oct  4 23:39:32 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 23:39:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 23:39:32 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 23:39:32 2011] Source does appear to be extended
[Tue Oct  4 23:39:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 23:40:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:40:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 23:40:10 2011] Initial guess for spatial extent in simple fitting = 4.65"
[Tue Oct  4 23:40:10 2011] source mask rpix=9.5, npix_max = 396, mask sum = 395, frac = 0.996
[Tue Oct  4 23:40:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.65"
[Tue Oct  4 23:40:11 2011] fullrun_ccd0_acisf09375_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct  4 23:40:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09375_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 23:40:11 2011] fullrun_ccd0_acisf09375_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct  4 23:40:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09375_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 23:40:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09375_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09375_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 23:40:11 2011] fullrun_ccd0_acisf09375_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 23:40:11 2011] fullrun_ccd0_acisf09375_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 23:40:11 2011] Fit fullrun_ccd0_acisf09375_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 23:40:24 2011] Spatial fit model total counts = 481.729000, observed total counts = 480.000000
[Tue Oct  4 23:40:24 2011] Offset between fit and detection position for source 1 = 0.073819 pixels
[Tue Oct  4 23:40:24 2011] 481.389600 total counts/ 54.687600 bgd. counts: snr = 57.700589
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.073819 pixels
  Position = (337.5, 754.7) = 11 16 37.23 1 32 49.6
  Extent = 4.6 (4.3-5.0)", rotation angle = 0
  Source counts = 426.7 +/- 21.9
  Background counts = 54.7
  Rate = 0.01 +/- 0.0006
[Tue Oct  4 23:40:24 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 23:40:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 23:40:24 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 23:40:24 2011] Source does appear to be extended
[Tue Oct  4 23:40:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 23:40:53 2011] Not overwriting source region fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_src.reg
[Tue Oct  4 23:40:53 2011] Extracting stamp from image fullrun_ccd0_acisf09375_pi14-548_cl_sm2.00.img.gz, (126, 543) - (549, 966)
[Tue Oct  4 23:40:53 2011] Writing fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1.gif
[Tue Oct  4 23:40:53 2011] ../../acisf09375/products/events/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_src.evt and ../../acisf09375/products/events/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Oct  4 23:40:53 2011] Size of ../../acisf09375/products/events/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_src.evt.gz[events] = 467 counts
[Tue Oct  4 23:40:53 2011] Mean chipx,y = (239.69, 304.67)
[Tue Oct  4 23:40:53 2011] Mean tdetx,y = (3365.67, 4892.31)
[Tue Oct  4 23:40:53 2011] chipx,y range = (194.00-288.00, 261.00-342.00)
[Tue Oct  4 23:40:53 2011] Size of ../../acisf09375/products/events/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 658 counts
[Tue Oct  4 23:40:53 2011] ../../acisf09375/products/images/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_src.img and ../../acisf09375/products/images/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Oct  4 23:40:53 2011] ../../acisf09375/products/spectra/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_src.pi and ../../acisf09375/products/spectra/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Oct  4 23:41:51 2011] ../../acisf09375/products/lightcurves/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_src.lc and ../../acisf09375/products/lightcurves/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Oct  4 23:51:51 2011] Keeping rmf generated by specextract
[Tue Oct  4 23:51:51 2011] 159.37
[Wed Oct  5 00:38:25 2011] Updating aperture counts using extracted products
[Wed Oct  5 00:38:25 2011] Error reading totcts from fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct  5 00:38:25 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:38:25 2011] Using photon index=1.80, rate=0.0108, arf fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 00:38:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 00:38:25 2011] Updating source flux to 1.5e-13
[Wed Oct  5 00:38:51 2011] Reading fit data from acisf09375/analysis//spectral/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct  5 00:38:51 2011] Spectral fit parameter nH value = 2.58369e+21
[Wed Oct  5 00:38:51 2011] Spectral fit parameter PhoIndex value = 4.65812
[Wed Oct  5 00:38:51 2011] Failed to get F(0.3-8.0) from acisf09375/analysis//spectral/fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 00:38:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:38:51 2011] Using Nh = 2.6e+21, photon index=4.66, rate=0.0108, arf fullrun_ccd0_acisf09375_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 00:38:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 00:38:51 2011] Updating source flux to 1.4e-13