[Wed Feb 22 15:23:44 2012] Detection parameters:
  Position = (215.3, 941.2) = 2 26 48.97 -4 52 17.9
  Extent = 1.9" x 1.5", rotation angle = 97 degrees
  Source counts = 76.9 +/- 10.7
  Background counts = 37.1
  Rate = 0.001 +/- 0.0001

[Wed Feb 22 15:23:45 2012] Off-axis axis estimate = 9.68'
[Wed Feb 22 15:27:07 2012] Using EEF radius (= 4.15 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 15:27:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 15:27:07 2012] Initial guess for spatial extent in simple fitting = 4.15"
[Wed Feb 22 15:27:07 2012] source mask rpix=8.4, npix_max = 319, mask sum = 324, frac = 1.015
[Wed Feb 22 15:27:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 4.15"
[Wed Feb 22 16:33:05 2012] fullrun_ccd2_acisf09368_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 22 16:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09368_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 16:33:05 2012] fullrun_ccd2_acisf09368_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 22 16:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09368_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 16:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09368_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09368_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 16:33:05 2012] fullrun_ccd2_acisf09368_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 22 16:33:05 2012] fullrun_ccd2_acisf09368_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 22 16:33:05 2012] Fit fullrun_ccd2_acisf09368_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 22 18:27:56 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 46.908456 pixels away
[Wed Feb 22 18:27:56 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 18:27:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 18:27:56 2012] Assessing source extent using major
[Wed Feb 22 18:27:56 2012] Source does appear to be extended
[Wed Feb 22 18:27:56 2012] Computing asymmetry using major and minor axis, asym = 1.27
[Wed Feb 22 18:28:24 2012] Using EEF radius (= 4.15 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 18:28:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 18:28:24 2012] Initial guess for spatial extent in simple fitting = 4.15"
[Wed Feb 22 18:28:24 2012] source mask rpix=8.4, npix_max = 319, mask sum = 324, frac = 1.015
[Wed Feb 22 18:28:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.15"
[Wed Feb 22 19:00:48 2012] fullrun_ccd2_acisf09368_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 22 19:00:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf09368_pi14-548_cl_pass1_src1.csv
[Wed Feb 22 19:00:48 2012] fullrun_ccd2_acisf09368_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 22 19:00:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf09368_pi14-548_cl_pass1_src1.csv
[Wed Feb 22 19:00:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09368_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09368_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 19:00:48 2012] fullrun_ccd2_acisf09368_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 22 19:00:48 2012] fullrun_ccd2_acisf09368_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 22 19:00:48 2012] Fit fullrun_ccd2_acisf09368_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 22 20:54:24 2012] Spatial fit model total counts = 151.781000, observed total counts = 154.000000
[Wed Feb 22 20:54:24 2012] Offset between fit and detection position for source 1 = 2.852633 pixels
[Wed Feb 22 20:54:24 2012] 151.460700 total counts/ 64.369900 bgd. counts: snr = 10.855026
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.852633 pixels
  Position = (217.3, 943.1) = 2 26 48.91 -4 52 17.2
  Extent = 3.7 (2.9-4.6)", rotation angle = 0
  Source counts = 87.1 +/- 12.3
  Background counts = 64.4
  Rate = 0.001 +/- 0.0002
[Wed Feb 22 20:54:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 20:54:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 20:54:24 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 20:54:24 2012] Source does appear to be extended
[Wed Feb 22 20:54:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 20:54:52 2012] Writing source region out to fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1_src.reg
[Wed Feb 22 20:54:52 2012] Extracting stamp from image fullrun_ccd2_acisf09368_pi14-548_cl_sm2.00.img.gz, (47, 773) - (387, 1113)
[Wed Feb 22 20:54:52 2012] Writing fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1.gif
[Wed Feb 22 20:54:55 2012] Size of ../../acisf09368/products/events/fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1_src.evt.gz[events] = 132 counts
[Wed Feb 22 20:54:55 2012] Mean chipx,y = (999.52, 257.47)
[Wed Feb 22 20:54:55 2012] Mean tdetx,y = (3318.47, 3086.48)
[Wed Feb 22 20:54:55 2012] chipx,y range = (966.00-1023.00, 215.00-293.00)
[Wed Feb 22 20:54:55 2012] Size of ../../acisf09368/products/events/fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 304 counts
[Wed Feb 22 20:54:56 2012] Not generating rmf since there are only 87 counts
[Wed Feb 22 20:54:56 2012] arf not found, will run specextract
[Wed Feb 22 20:55:16 2012] ../../acisf09368/products/spectra/fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1.warf not found
[Wed Feb 22 20:55:16 2012] ../../acisf09368/products/spectra/fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1.wrmf not found
[Wed Feb 22 20:55:16 2012] Removal of ../../acisf09368/products/spectra/fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1.soff failed
[Wed Feb 22 21:00:25 2012] Spectrum 1 has only 87 counts, deleting rmf
[Wed Feb 22 21:00:25 2012] 137.07
[Wed Feb 22 21:29:01 2012] Updating aperture counts using extracted products
[Wed Feb 22 21:29:01 2012] Error reading totcts from fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Feb 22 21:29:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 21:29:01 2012] Using photon index=1.80, rate=0.00116, arf fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1.arf
[Wed Feb 22 21:29:01 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 22 21:29:01 2012] Updating source flux to 2e-14
[Wed Feb 22 21:29:06 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 22 21:29:07 2012] acisf09368/analysis//spectral/fullrun_ccd2_acisf09368_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete