[Thu Feb 23 09:00:28 2012] Detection parameters:
  Position = (178.6, 639.0) = 14 2 59.78 54 24 25.6
  Extent = 0.7" x 0.5", rotation angle = 87 degrees
  Source counts = 27.1 +/- 5.4
  Background counts = 1.9
  Rate = 0.0003 +/- 5e-05

[Thu Feb 23 09:00:30 2012] Off-axis axis estimate = 2.69'
[Thu Feb 23 10:13:23 2012] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 10:13:23 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Thu Feb 23 10:13:23 2012] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.231
[Thu Feb 23 10:13:23 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 0.52"
[Thu Feb 23 11:07:28 2012] fullrun_ccd6_acisf00934_pi14-548_cl_pass0_src21.ximg exists
[Thu Feb 23 11:07:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00934_pi14-548_cl_pass0_src21.csv
[Thu Feb 23 11:07:28 2012] fullrun_ccd6_acisf00934_pi14-548_cl_pass0_src21_1.ximg exists
[Thu Feb 23 11:07:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00934_pi14-548_cl_pass0_src21.csv
[Thu Feb 23 11:07:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00934_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00934_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 11:07:28 2012] fullrun_ccd6_acisf00934_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Thu Feb 23 11:07:28 2012] fullrun_ccd6_acisf00934_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Feb 23 11:07:28 2012] Fit fullrun_ccd6_acisf00934_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Feb 23 12:40:42 2012] Spatial fit model total counts = 29.251500, observed total counts = 30.000000
[Thu Feb 23 12:40:42 2012] Offset between fit and detection position for source 15 = 0.718045 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.718045 pixels
  Position = (179.1, 639.5) = 14 2 59.78 54 24 25.6
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 29.6 +/- 5.4
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Thu Feb 23 12:40:42 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 12:40:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 12:40:42 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 12:40:42 2012] Source does appear to be extended
[Thu Feb 23 12:40:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 13:48:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 13:48:23 2012] Initial guess for spatial extent in simple fitting = 0.70"
[Thu Feb 23 13:48:23 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.809
[Thu Feb 23 13:48:23 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 0.70"
[Thu Feb 23 14:41:58 2012] fullrun_ccd6_acisf00934_pi14-548_cl_pass1_src20.ximg exists
[Thu Feb 23 14:41:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00934_pi14-548_cl_pass1_src20.csv
[Thu Feb 23 14:41:58 2012] fullrun_ccd6_acisf00934_pi14-548_cl_pass1_src20_1.ximg exists
[Thu Feb 23 14:41:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00934_pi14-548_cl_pass1_src20.csv
[Thu Feb 23 14:41:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00934_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00934_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 14:41:59 2012] fullrun_ccd6_acisf00934_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Thu Feb 23 14:41:59 2012] fullrun_ccd6_acisf00934_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Feb 23 14:41:59 2012] Fit fullrun_ccd6_acisf00934_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Thu Feb 23 16:27:53 2012] Spatial fit model total counts = 29.333900, observed total counts = 30.000000
[Thu Feb 23 16:27:53 2012] Offset between fit and detection position for source 15 = 0.092135 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.092135 pixels
  Position = (179.0, 639.4) = 14 2 59.78 54 24 25.5
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 29.5 +/- 5.4
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Thu Feb 23 16:27:53 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 16:27:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 16:27:53 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 16:27:53 2012] Source does appear to be extended
[Thu Feb 23 16:27:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 16:40:47 2012] Writing source region out to fullrun_ccd6_acisf00934_pi14-548_pass1_cl_src15_src.reg
[Thu Feb 23 16:40:47 2012] Extracting stamp from image fullrun_ccd6_acisf00934_pi14-548_cl_sm2.00.img.gz, (147, 607) - (212, 672)
[Thu Feb 23 16:40:47 2012] Writing fullrun_ccd6_acisf00934_pi14-548_pass1_cl_src15.gif
[Thu Feb 23 16:51:21 2012] Size of ../../acisf00934/products/events/fullrun_ccd6_acisf00934_pi14-548_pass1_cl_src15_src.evt.gz[events] = 29 counts
[Thu Feb 23 16:51:21 2012] Mean chipx,y = (1001.14, 721.69)
[Thu Feb 23 16:51:21 2012] Mean tdetx,y = (3876.14, 2423.69)
[Thu Feb 23 16:51:21 2012] chipx,y range = (980.00-1017.00, 705.00-739.00)
[Thu Feb 23 16:51:21 2012] Size of ../../acisf00934/products/events/fullrun_ccd6_acisf00934_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 23 counts
[Thu Feb 23 16:51:22 2012] Not generating rmf since there are only 29 counts
[Thu Feb 23 16:51:22 2012] arf not found, will run specextract
[Thu Feb 23 16:51:52 2012] ../../acisf00934/products/spectra/fullrun_ccd6_acisf00934_pi14-548_pass1_cl_src15.warf not found
[Thu Feb 23 16:51:52 2012] ../../acisf00934/products/spectra/fullrun_ccd6_acisf00934_pi14-548_pass1_cl_src15.wrmf not found
[Thu Feb 23 16:51:52 2012] Removal of ../../acisf00934/products/spectra/fullrun_ccd6_acisf00934_pi14-548_pass1_cl_src15.soff failed
[Thu Feb 23 17:09:51 2012] Spectrum 15 has only 29 counts, deleting rmf
[Thu Feb 23 17:09:51 2012] 210.246
[Thu Feb 23 17:42:02 2012] Updating aperture counts using extracted products
[Thu Feb 23 17:42:02 2012] Error reading totcts from fullrun_ccd6_acisf00934_pi14-548_pass1_cl_src15_src.pi.gz
[Thu Feb 23 17:42:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 17:42:02 2012] Using photon index=1.80, rate=0.0003, arf fullrun_ccd6_acisf00934_pi14-548_pass1_cl_src15.arf
[Thu Feb 23 17:42:02 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 17:42:02 2012] Updating source flux to 2.8e-15
[Thu Feb 23 17:42:19 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting