[Mon Sep 26 05:33:14 2011] Detection parameters:
  Position = (265.8, 217.9) = 23 59 58.98 -50 13 31.8
  Extent = 1.9" x 1.7", rotation angle = 152 degrees
  Source counts = 40.9 +/- 6.9
  Background counts = 7.1
  Rate = 0.001 +/- 0.0002

[Mon Sep 26 05:33:17 2011] Off-axis axis estimate = 7.65'
[Mon Sep 26 05:34:38 2011] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:34:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 05:34:38 2011] Initial guess for spatial extent in simple fitting = 2.59"
[Mon Sep 26 05:34:38 2011] source mask rpix=5.3, npix_max = 133, mask sum = 144, frac = 1.082
[Mon Sep 26 05:34:38 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.59"
[Mon Sep 26 05:34:39 2011] fullrun_ccd3_acisf09334_pi14-548_cl_pass0_src3.ximg exists
[Mon Sep 26 05:34:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09334_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 05:34:39 2011] fullrun_ccd3_acisf09334_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Sep 26 05:34:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09334_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 05:34:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09334_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09334_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:34:40 2011] fullrun_ccd3_acisf09334_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep 26 05:34:40 2011] fullrun_ccd3_acisf09334_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep 26 05:34:40 2011] Fit fullrun_ccd3_acisf09334_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Sep 26 05:35:07 2011] Spatial fit model total counts = 50.996400, observed total counts = 51.000000
[Mon Sep 26 05:35:07 2011] Offset between fit and detection position for source 2 = 0.806597 pixels
[Mon Sep 26 05:35:07 2011] 51.039000 total counts/ 16.704000 bgd. counts: snr = 8.400919
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.806597 pixels
  Position = (265.6, 218.7) = 23 59 59.02 -50 13 31.7
  Extent = 1.6 (1.2-2.2)", rotation angle = 0
  Source counts = 34.3 +/- 7.1
  Background counts = 16.7
  Rate = 0.001 +/- 0.0002
[Mon Sep 26 05:35:07 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:35:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:35:07 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:35:07 2011] Source does appear to be extended
[Mon Sep 26 05:35:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:35:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:35:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 05:35:45 2011] Initial guess for spatial extent in simple fitting = 1.60"
[Mon Sep 26 05:35:45 2011] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.873
[Mon Sep 26 05:35:45 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.60"
[Mon Sep 26 05:35:47 2011] fullrun_ccd3_acisf09334_pi14-548_cl_pass1_src3.ximg exists
[Mon Sep 26 05:35:47 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09334_pi14-548_cl_pass1_src3.csv
[Mon Sep 26 05:35:47 2011] fullrun_ccd3_acisf09334_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Sep 26 05:35:47 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf09334_pi14-548_cl_pass1_src3.csv
[Mon Sep 26 05:35:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09334_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09334_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:35:48 2011] fullrun_ccd3_acisf09334_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Sep 26 05:35:48 2011] fullrun_ccd3_acisf09334_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Sep 26 05:35:48 2011] Fit fullrun_ccd3_acisf09334_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Sep 26 05:35:59 2011] Spatial fit model total counts = 40.537300, observed total counts = 41.000000
[Mon Sep 26 05:35:59 2011] Offset between fit and detection position for source 2 = 0.448862 pixels
[Mon Sep 26 05:35:59 2011] 41.059300 total counts/ 9.102600 bgd. counts: snr = 10.592030
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.448862 pixels
  Position = (265.1, 218.7) = 23 59 59.04 -50 13 31.7
  Extent = 1.5 (0.9-2.0)", rotation angle = 0
  Source counts = 32.0 +/- 6.4
  Background counts = 9.1
  Rate = 0.001 +/- 0.0002
[Mon Sep 26 05:35:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:35:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:35:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:35:59 2011] Source does appear to be extended
[Mon Sep 26 05:35:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:39:12 2011] Not overwriting source region fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_src.reg
[Mon Sep 26 05:39:12 2011] Extracting stamp from image fullrun_ccd3_acisf09334_pi14-548_cl_sm2.00.img.gz, (196, 150) - (334, 288)
[Mon Sep 26 05:39:12 2011] Writing fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2.gif
[Mon Sep 26 05:39:21 2011] ../../acisf09334/products/events/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_src.evt and ../../acisf09334/products/events/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Sep 26 05:39:21 2011] Size of ../../acisf09334/products/events/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_src.evt.gz[events] = 45 counts
[Mon Sep 26 05:39:21 2011] Mean chipx,y = (83.62, 262.31)
[Mon Sep 26 05:39:21 2011] Mean tdetx,y = (4869.69, 3144.62)
[Mon Sep 26 05:39:21 2011] chipx,y range = (61.00-100.00, 241.00-285.00)
[Mon Sep 26 05:39:21 2011] Size of ../../acisf09334/products/events/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 62 counts
[Mon Sep 26 05:39:21 2011] ../../acisf09334/products/images/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_src.img and ../../acisf09334/products/images/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Sep 26 05:39:21 2011] ../../acisf09334/products/spectra/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_src.pi and ../../acisf09334/products/spectra/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Sep 26 05:39:21 2011] Not generating rmf since there are only 31 counts
[Mon Sep 26 05:39:27 2011] ../../acisf09334/products/lightcurves/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_src.lc and ../../acisf09334/products/lightcurves/fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Sep 26 05:40:35 2011] 165.293
[Mon Sep 26 05:40:46 2011] Updating aperture counts using extracted products
[Mon Sep 26 05:40:46 2011] Error reading totcts from fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Sep 26 05:40:46 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 05:40:46 2011] Using photon index=1.80, rate=0.00107, arf fullrun_ccd3_acisf09334_pi14-548_pass1_cl_src2.arf
[Mon Sep 26 05:40:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 05:40:46 2011] Updating source flux to 1.6e-14
[Mon Sep 26 05:40:53 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting