[Sat Oct 1 16:44:04 2011] Detection parameters: Position = (792.6, 870.7) = 4 33 37.91 -13 15 46.8 Extent = 0.7" x 0.7", rotation angle = 37 degrees Source counts = 200.2 +/- 22.0 Background counts = 281.8 Rate = 0.01 +/- 0.001 [Sat Oct 1 16:44:06 2011] Off-axis axis estimate = 0.84' [Sat Oct 1 16:45:16 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting [Sat Oct 1 16:45:16 2011] Initial guess for spatial extent in simple fitting = 0.38" [Sat Oct 1 16:45:16 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.384 [Sat Oct 1 16:45:16 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.38" [Sat Oct 1 16:45:16 2011] fullrun_ccd7_acisf00931_pi14-548_cl_pass0_src3.ximg exists [Sat Oct 1 16:45:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00931_pi14-548_cl_pass0_src3.csv [Sat Oct 1 16:45:16 2011] fullrun_ccd7_acisf00931_pi14-548_cl_pass0_src3_1.ximg exists [Sat Oct 1 16:45:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00931_pi14-548_cl_pass0_src3.csv [Sat Oct 1 16:45:16 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf00931_pi14-548_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf00931_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 1 16:45:17 2011] fullrun_ccd7_acisf00931_pi14-548_cl_pass0_tfrozen_src3.ximg exists [Sat Oct 1 16:45:17 2011] fullrun_ccd7_acisf00931_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists [Sat Oct 1 16:45:17 2011] Fit fullrun_ccd7_acisf00931_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly [Sat Oct 1 16:45:23 2011] Spatial fit model total counts = 696.000000, observed total counts = 696.000000 [Sat Oct 1 16:45:23 2011] Offset between fit and detection position for source 3 = 1.942098 pixels [Sat Oct 1 16:45:23 2011] 700.035700 total counts/ 659.219000 bgd. counts: snr = 1.589729 Spatial fit parameters: Offset between fit and detection position for source 3 = 1.942098 pixels Position = (794.1, 871.9) = 4 33 37.87 -13 15 46.5 Extent = 0.6 (0.2-1.0)", rotation angle = 0 Source counts = 40.8 +/- 26.5 Background counts = 659.2 Rate = 0.004 +/- 0.002 Deleting source due to low Poisson probability