[Fri Oct 28 12:50:24 2011] Detection parameters:
  Position = (860.2, 736.9) = 8 49 8.68 44 58 42.8
  Extent = 1.0" x 0.5", rotation angle = 52 degrees
  Source counts = 46.4 +/- 7.1
  Background counts = 3.6
  Rate = 0.0004 +/- 6e-05

[Fri Oct 28 12:50:27 2011] Off-axis axis estimate = 4.79'
[Fri Oct 28 12:52:13 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:52:13 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Fri Oct 28 12:52:13 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.207
[Fri Oct 28 12:52:13 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 1.10"
[Fri Oct 28 12:52:15 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src15.ximg exists
[Fri Oct 28 12:52:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src15.csv
[Fri Oct 28 12:52:15 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Oct 28 12:52:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src15.csv
[Fri Oct 28 12:52:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:52:16 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Oct 28 12:52:16 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Oct 28 12:52:16 2011] Fit fullrun_ccd3_acisf00927_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Oct 28 12:52:40 2011] Spatial fit model total counts = 52.758900, observed total counts = 53.000000
[Fri Oct 28 12:52:40 2011] Offset between fit and detection position for source 12 = 0.733570 pixels
[Fri Oct 28 12:52:40 2011] 52.742070 total counts/ 7.812770 bgd. counts: snr = 16.074117
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.733570 pixels
  Position = (860.7, 737.4) = 8 49 8.68 44 58 42.9
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 44.9 +/- 7.3
  Background counts = 7.8
  Rate = 0.0004 +/- 6e-05
[Fri Oct 28 12:52:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:52:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:52:40 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:52:40 2011] Source does appear to be extended
[Fri Oct 28 12:52:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:53:11 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Oct 28 12:53:11 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.085
[Fri Oct 28 12:53:11 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.93"
[Fri Oct 28 12:53:12 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src15.ximg exists
[Fri Oct 28 12:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src15.csv
[Fri Oct 28 12:53:12 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Oct 28 12:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src15.csv
[Fri Oct 28 12:53:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:53:13 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Oct 28 12:53:13 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Oct 28 12:53:13 2011] Fit fullrun_ccd3_acisf00927_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Oct 28 12:53:36 2011] Spatial fit model total counts = 51.305600, observed total counts = 52.000000
[Fri Oct 28 12:53:36 2011] Offset between fit and detection position for source 12 = 0.065984 pixels
[Fri Oct 28 12:53:36 2011] 51.136500 total counts/ 6.538900 bgd. counts: snr = 17.440508
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.065984 pixels
  Position = (860.7, 737.5) = 8 49 8.68 44 58 42.9
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 44.6 +/- 7.2
  Background counts = 6.5
  Rate = 0.0004 +/- 6e-05
[Fri Oct 28 12:53:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:53:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:53:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:53:36 2011] Source does appear to be extended
[Fri Oct 28 12:53:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:58:05 2011] Not overwriting source region fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_src.reg
[Fri Oct 28 12:58:05 2011] Extracting stamp from image fullrun_ccd3_acisf00927_pi14-548_cl_sm2.00.img.gz, (819, 696) - (903, 779)
[Fri Oct 28 12:58:05 2011] Writing fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12.gif
[Fri Oct 28 12:58:49 2011] ../../acisf00927/products/events/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_src.evt and ../../acisf00927/products/events/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Oct 28 12:58:49 2011] Size of ../../acisf00927/products/events/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_src.evt.gz[events] = 50 counts
[Fri Oct 28 12:58:49 2011] Mean chipx,y = (786.76, 440.92)
[Fri Oct 28 12:58:49 2011] Mean tdetx,y = (4691.08, 3847.76)
[Fri Oct 28 12:58:49 2011] chipx,y range = (765.00-803.00, 423.00-459.00)
[Fri Oct 28 12:58:49 2011] Size of ../../acisf00927/products/events/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 63 counts
[Fri Oct 28 12:58:49 2011] ../../acisf00927/products/images/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_src.img and ../../acisf00927/products/images/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Oct 28 12:58:49 2011] ../../acisf00927/products/spectra/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_src.pi and ../../acisf00927/products/spectra/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Oct 28 12:58:49 2011] Not generating rmf since there are only 44 counts
[Fri Oct 28 12:58:51 2011] ../../acisf00927/products/lightcurves/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_src.lc and ../../acisf00927/products/lightcurves/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Oct 28 13:00:18 2011] 191.616
[Fri Oct 28 13:00:58 2011] Updating aperture counts using extracted products
[Fri Oct 28 13:00:58 2011] Error reading totcts from fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Oct 28 13:00:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 13:00:58 2011] Using photon index=1.80, rate=0.000356, arf fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src12.arf
[Fri Oct 28 13:00:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 13:00:58 2011] Updating source flux to 3.9e-15
[Fri Oct 28 13:01:45 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting