[Fri Oct 28 12:50:24 2011] Detection parameters:
  Position = (891.2, 679.0) = 8 49 7.24 44 58 14.4
  Extent = 0.9" x 0.6", rotation angle = 40 degrees
  Source counts = 41.5 +/- 6.7
  Background counts = 3.5
  Rate = 0.0003 +/- 5e-05

[Fri Oct 28 12:50:27 2011] Off-axis axis estimate = 4.25'
[Fri Oct 28 12:52:13 2011] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:52:13 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Fri Oct 28 12:52:13 2011] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.909
[Fri Oct 28 12:52:13 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.91"
[Fri Oct 28 12:52:15 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src17.ximg exists
[Fri Oct 28 12:52:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src17.csv
[Fri Oct 28 12:52:15 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Oct 28 12:52:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src17.csv
[Fri Oct 28 12:52:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00927_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:52:16 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Oct 28 12:52:16 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Oct 28 12:52:16 2011] Fit fullrun_ccd3_acisf00927_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Oct 28 12:52:40 2011] Spatial fit model total counts = 46.920400, observed total counts = 47.000000
[Fri Oct 28 12:52:40 2011] Offset between fit and detection position for source 11 = 0.412217 pixels
[Fri Oct 28 12:52:40 2011] 47.878800 total counts/ 12.710300 bgd. counts: snr = 9.864520
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.412217 pixels
  Position = (891.3, 679.4) = 8 49 7.26 44 58 14.3
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 35.2 +/- 6.9
  Background counts = 12.7
  Rate = 0.0003 +/- 6e-05
[Fri Oct 28 12:52:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:52:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:52:40 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:52:40 2011] Source does appear to be extended
[Fri Oct 28 12:52:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:53:11 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Oct 28 12:53:11 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.105
[Fri Oct 28 12:53:11 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.69"
[Fri Oct 28 12:53:12 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src17.ximg exists
[Fri Oct 28 12:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src17.csv
[Fri Oct 28 12:53:12 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Oct 28 12:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src17.csv
[Fri Oct 28 12:53:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00927_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:53:13 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Oct 28 12:53:13 2011] fullrun_ccd3_acisf00927_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Oct 28 12:53:13 2011] Fit fullrun_ccd3_acisf00927_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Oct 28 12:53:36 2011] Spatial fit model total counts = 46.846000, observed total counts = 47.000000
[Fri Oct 28 12:53:36 2011] Offset between fit and detection position for source 11 = 0.007926 pixels
[Fri Oct 28 12:53:36 2011] 47.748900 total counts/ 12.538100 bgd. counts: snr = 9.943975
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.007926 pixels
  Position = (891.3, 679.4) = 8 49 7.26 44 58 14.3
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 35.2 +/- 6.9
  Background counts = 12.5
  Rate = 0.0003 +/- 6e-05
[Fri Oct 28 12:53:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:53:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:53:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:53:36 2011] Source does appear to be extended
[Fri Oct 28 12:53:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:58:05 2011] Not overwriting source region fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 28 12:58:05 2011] Extracting stamp from image fullrun_ccd3_acisf00927_pi14-548_cl_sm2.00.img.gz, (860, 648) - (923, 711)
[Fri Oct 28 12:58:05 2011] Writing fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11.gif
[Fri Oct 28 12:58:54 2011] ../../acisf00927/products/events/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_src.evt and ../../acisf00927/products/events/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 28 12:58:54 2011] Size of ../../acisf00927/products/events/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_src.evt.gz[events] = 43 counts
[Fri Oct 28 12:58:54 2011] Mean chipx,y = (797.93, 505.77)
[Fri Oct 28 12:58:54 2011] Mean tdetx,y = (4626.23, 3858.93)
[Fri Oct 28 12:58:54 2011] chipx,y range = (783.00-818.00, 489.00-524.00)
[Fri Oct 28 12:58:54 2011] Size of ../../acisf00927/products/events/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 37 counts
[Fri Oct 28 12:58:54 2011] ../../acisf00927/products/images/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_src.img and ../../acisf00927/products/images/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 28 12:58:54 2011] ../../acisf00927/products/spectra/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_src.pi and ../../acisf00927/products/spectra/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 28 12:58:54 2011] Not generating rmf since there are only 35 counts
[Fri Oct 28 12:58:57 2011] ../../acisf00927/products/lightcurves/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_src.lc and ../../acisf00927/products/lightcurves/fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 28 13:00:18 2011] 194.145
[Fri Oct 28 13:00:58 2011] Updating aperture counts using extracted products
[Fri Oct 28 13:00:58 2011] Error reading totcts from fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 28 13:00:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 13:00:58 2011] Using photon index=1.80, rate=0.000281, arf fullrun_ccd3_acisf00927_pi14-548_pass1_cl_src11.arf
[Fri Oct 28 13:00:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 13:00:59 2011] Updating source flux to 3e-15
[Fri Oct 28 13:01:45 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting