[Fri Oct 28 12:50:16 2011] Detection parameters:
  Position = (147.1, 994.6) = 8 48 54.12 45 2 31.5
  Extent = 2.3" x 1.9", rotation angle = 99 degrees
  Source counts = 175.2 +/- 14.3
  Background counts = 29.8
  Rate = 0.001 +/- 0.0001

[Fri Oct 28 12:50:19 2011] Off-axis axis estimate = 7.94'
[Fri Oct 28 12:52:09 2011] Using EEF radius (= 2.79 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:52:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 12:52:09 2011] Initial guess for spatial extent in simple fitting = 2.79"
[Fri Oct 28 12:52:09 2011] source mask rpix=5.7, npix_max = 151, mask sum = 156, frac = 1.028
[Fri Oct 28 12:52:09 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.79"
[Fri Oct 28 12:52:10 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 28 12:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 12:52:10 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 28 12:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 12:52:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:52:10 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 28 12:52:10 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 28 12:52:10 2011] Fit fullrun_ccd1_acisf00927_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 28 12:52:31 2011] Spatial fit model total counts = 206.958000, observed total counts = 207.000000
[Fri Oct 28 12:52:31 2011] Offset between fit and detection position for source 2 = 0.628327 pixels
[Fri Oct 28 12:52:31 2011] 207.546800 total counts/ 52.573800 bgd. counts: snr = 21.373289
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.628327 pixels
  Position = (147.7, 994.8) = 8 48 54.12 45 2 31.4
  Extent = 2.0 (1.7-2.4)", rotation angle = 0
  Source counts = 155.0 +/- 14.4
  Background counts = 52.6
  Rate = 0.001 +/- 0.0001
[Fri Oct 28 12:52:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:52:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:52:31 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:52:31 2011] Source does appear to be extended
[Fri Oct 28 12:52:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:53:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:53:07 2011] Initial guess for spatial extent in simple fitting = 2.00"
[Fri Oct 28 12:53:07 2011] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.969
[Fri Oct 28 12:53:07 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.00"
[Fri Oct 28 12:53:07 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 28 12:53:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 12:53:07 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 28 12:53:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 12:53:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 28 12:53:08 2011] Fit fullrun_ccd1_acisf00927_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 28 12:53:28 2011] Spatial fit model total counts = 186.921000, observed total counts = 187.000000
[Fri Oct 28 12:53:28 2011] Offset between fit and detection position for source 2 = 0.280041 pixels
[Fri Oct 28 12:53:28 2011] 188.148000 total counts/ 59.560000 bgd. counts: snr = 16.661845
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.280041 pixels
  Position = (147.7, 994.5) = 8 48 54.12 45 2 31.2
  Extent = 1.7 (1.3-2.1)", rotation angle = 0
  Source counts = 128.6 +/- 13.7
  Background counts = 59.6
  Rate = 0.001 +/- 0.0001
[Fri Oct 28 12:53:28 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:53:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:53:28 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:53:28 2011] Source does appear to be extended
[Fri Oct 28 12:53:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:55:08 2011] Not overwriting source region fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 28 12:55:08 2011] Extracting stamp from image fullrun_ccd1_acisf00927_pi14-548_cl_sm2.00.img.gz, (70, 917) - (225, 1072)
[Fri Oct 28 12:55:08 2011] Writing fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2.gif
[Fri Oct 28 12:55:15 2011] ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_src.evt and ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 28 12:55:15 2011] Size of ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_src.evt.gz[events] = 188 counts
[Fri Oct 28 12:55:15 2011] Mean chipx,y = (136.43, 48.80)
[Fri Oct 28 12:55:15 2011] Mean tdetx,y = (5083.20, 4243.43)
[Fri Oct 28 12:55:15 2011] chipx,y range = (114.00-166.00, 24.00-75.00)
[Fri Oct 28 12:55:15 2011] Size of ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 162 counts
[Fri Oct 28 12:55:15 2011] ../../acisf00927/products/images/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_src.img and ../../acisf00927/products/images/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 28 12:55:15 2011] ../../acisf00927/products/spectra/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_src.pi and ../../acisf00927/products/spectra/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 28 12:55:18 2011] ../../acisf00927/products/lightcurves/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_src.lc and ../../acisf00927/products/lightcurves/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 28 12:56:20 2011] Keeping rmf generated by specextract
[Fri Oct 28 12:56:20 2011] 176.751
[Fri Oct 28 13:00:56 2011] Updating aperture counts using extracted products
[Fri Oct 28 13:00:56 2011] Error reading totcts from fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 28 13:00:57 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 13:00:57 2011] Using photon index=1.80, rate=0.00103, arf fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src2.arf
[Fri Oct 28 13:00:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 13:00:57 2011] Updating source flux to 1.2e-14