[Fri Oct 28 12:50:17 2011] Detection parameters:
  Position = (660.7, 212.1) = 8 48 30.33 44 56 6.4
  Extent = 1.0" x 0.7", rotation angle = 124 degrees
  Source counts = 31.2 +/- 5.9
  Background counts = 3.8
  Rate = 0.0002 +/- 5e-05

[Fri Oct 28 12:50:19 2011] Off-axis axis estimate = 4.61'
[Fri Oct 28 12:52:09 2011] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:52:09 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Fri Oct 28 12:52:09 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.927
[Fri Oct 28 12:52:09 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.03"
[Fri Oct 28 12:52:10 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src11.ximg exists
[Fri Oct 28 12:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src11.csv
[Fri Oct 28 12:52:10 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Oct 28 12:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src11.csv
[Fri Oct 28 12:52:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00927_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:52:11 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct 28 12:52:11 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct 28 12:52:11 2011] Fit fullrun_ccd1_acisf00927_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Oct 28 12:52:31 2011] Spatial fit model total counts = 37.435600, observed total counts = 38.000000
[Fri Oct 28 12:52:31 2011] Offset between fit and detection position for source 12 = 0.503493 pixels
[Fri Oct 28 12:52:31 2011] 38.435410 total counts/ 7.225710 bgd. counts: snr = 11.610457
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.503493 pixels
  Position = (661.1, 212.4) = 8 48 30.33 44 56 6.3
  Extent = 1.1 (0.8-1.7)", rotation angle = 0
  Source counts = 31.2 +/- 6.2
  Background counts = 7.2
  Rate = 0.0002 +/- 5e-05
[Fri Oct 28 12:52:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:52:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:52:31 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:52:31 2011] Source does appear to be extended
[Fri Oct 28 12:52:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:53:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:53:07 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Fri Oct 28 12:53:07 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940
[Fri Oct 28 12:53:07 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.14"
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src11.ximg exists
[Fri Oct 28 12:53:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src11.csv
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Oct 28 12:53:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src11.csv
[Fri Oct 28 12:53:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00927_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Oct 28 12:53:08 2011] fullrun_ccd1_acisf00927_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Oct 28 12:53:08 2011] Fit fullrun_ccd1_acisf00927_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Oct 28 12:53:28 2011] Spatial fit model total counts = 37.130700, observed total counts = 38.000000
[Fri Oct 28 12:53:28 2011] Offset between fit and detection position for source 12 = 0.185930 pixels
[Fri Oct 28 12:53:28 2011] 37.923400 total counts/ 5.945100 bgd. counts: snr = 13.115226
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.185930 pixels
  Position = (661.2, 212.3) = 8 48 30.32 44 56 6.2
  Extent = 1.1 (0.9-1.6)", rotation angle = 0
  Source counts = 32.0 +/- 6.2
  Background counts = 5.9
  Rate = 0.0003 +/- 5e-05
[Fri Oct 28 12:53:28 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:53:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:53:28 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:53:28 2011] Source does appear to be extended
[Fri Oct 28 12:53:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:55:08 2011] Not overwriting source region fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_src.reg
[Fri Oct 28 12:55:08 2011] Extracting stamp from image fullrun_ccd1_acisf00927_pi14-548_cl_sm2.00.img.gz, (609, 160) - (714, 265)
[Fri Oct 28 12:55:08 2011] Writing fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12.gif
[Fri Oct 28 12:55:38 2011] ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_src.evt and ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Oct 28 12:55:38 2011] Size of ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_src.evt.gz[events] = 39 counts
[Fri Oct 28 12:55:38 2011] Mean chipx,y = (483.00, 915.82)
[Fri Oct 28 12:55:38 2011] Mean tdetx,y = (4216.18, 4590.00)
[Fri Oct 28 12:55:38 2011] chipx,y range = (465.00-505.00, 902.00-934.00)
[Fri Oct 28 12:55:38 2011] Size of ../../acisf00927/products/events/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 83 counts
[Fri Oct 28 12:55:38 2011] ../../acisf00927/products/images/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_src.img and ../../acisf00927/products/images/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Oct 28 12:55:38 2011] ../../acisf00927/products/spectra/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_src.pi and ../../acisf00927/products/spectra/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Oct 28 12:55:38 2011] Not generating rmf since there are only 31 counts
[Fri Oct 28 12:55:41 2011] ../../acisf00927/products/lightcurves/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_src.lc and ../../acisf00927/products/lightcurves/fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Oct 28 12:56:20 2011] 194.567
[Fri Oct 28 13:00:56 2011] Updating aperture counts using extracted products
[Fri Oct 28 13:00:56 2011] Error reading totcts from fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Oct 28 13:00:57 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 13:00:57 2011] Using photon index=1.80, rate=0.000256, arf fullrun_ccd1_acisf00927_pi14-548_pass1_cl_src12.arf
[Fri Oct 28 13:00:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 13:00:57 2011] Updating source flux to 2.7e-15
[Fri Oct 28 13:01:21 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting